PROVN OF ROOF REPLACEMENT PATHWAY FOR GUARD POST 08 TO 09 SECURITY WALL BOUNDARY WALL AND CABINETS FOR JCOs NCOs NCEs UNDER GE NARANGI

Amount

Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and as directed. Note: To be executed for provision of ridges and hips.

Dismantling wrought iron or mild steel work of any description not otherwise complete all as specified and as directed.

S&F Rolledmld steel roof trusses ( framed) trussed purlins, crane gantries, rails and fastenings and heavy brackets framing ( Beam, tee, angle, channel or flat section) including distace pieces, cleats etc confirming to Fe 410-W ( Gde E-250 Quality A)complete all as specified & as directed.

Dismantling boarding any description, fixed in any position with screws complete all as specified and as directed.

M&L for seccond class hard wood weather boarding , clean sawn, plain 19/20mm thick or feather edged 15/20mm thick and fixed with 30mm laps complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and not exceeding 1.5 m in depth for foundation etc, or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and as directed.

M&L surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.complete all as specified and directed.

M&Lforming embankments including raising or (lowering) earth, spreading in layers not exceeding 30 cm thick watering , ramming/rolling and finishing to required size , shape etc. not exceeding 15cm high from base.complete all as specified and directed.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft / loose soil etc complete all as specified and as directed.

Removing of surplus excavated material not exc 50m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L broken glass coping on top of wall in CM 1:3 complete all as specified and directed

S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints as in weep hole of wall complete all as specified and directed

S&F in repairs 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints as in weep hole of wall complete all as specified and directed

M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.

M&L PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in beams, seimic bands, cantilevers, bressumers and lintels complete all as specified as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in Columns, pillars, piers, posts and struts etc.complete all as specified as directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for TMT bars 6mm to 8 mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified as directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified as directed.

M&L Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified as directed.

M & L for brick work with sub class B bricks old size (locally available best quality) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Dismantling.posts or struts of any section Wood, steel or RCC),embeded in concrete ,including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling barbed wire of any size and description and fixed in any position complete.

M&L Machine pressed precast concrete interlocking paver block coloured with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with 40mm thick sand cushioning with proper compacting through vibratory compaction by using plate vibrator including filling the joints with sand including demolition of old slabs and tiles complete all as specified & as directed.

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

S&F aluminium anodised frame for door, windows, ventilator, partitions etc. with one or more rebates including jointing cleat of appproved aluminium section and size complete all as specified & as directed.

S&F anodised aluminium push , pull type glazed door shutter single leaf having top , bottom, and middle rail of section 85.00mmX 44.45mmX 1.20mm thick, , door vertical of section 47.62mmX44.45mmX 1.20mm thick , frame top and sides 63.50mm X 38.10mm X 1.20mm thick including necessary jointing clips, glazing clips, rubber packing, snap beading, screws, handle and locking arrangement etc, 5.50mm thick float glass tinted quality on both panel complete all as specified and directed.(Note: Door closure shall be measured and paid seoerately) .

S&F Door closure hydraulically regulated, designation no 3 ,universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminiun alloy sheet foundation box , main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty complete all as specified and directed .

M&L 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.

S & F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel and steel based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed

M & L for preparation of old wooden surface over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Pusphas Construction Pvt Ltd

Ms Sukumar Talukdar and Co.

M/S M Ahmed and Co.

VENUS TRADING CORPORATION