Certain B/R Repairs to Military Hospital Fatehgarh under GE Fateharh.

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed. Note:- Old retrived brick obtain in serviceable condition from demolistion shall be used in work

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L 40 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring,finished even and smooth using extra cement complete all as specified and directed.

M&L for 50 mm thickness PCC (1:3:6) type C-1 using 20mm stone aggregate in plinth protection including finishing smooth without using extra cement, complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

M & L machine cut kota stone slabs flooring 20-25 mm thick as in patches on and incl cement screed bedding 15mm thick in Cement Mortar (1:6) jointing with grey cement slurry mixed with pigment to match the shade of slab incl grinding and polishing (with bee's wax) including dismantling of existing treatment complete all as specified and directed.

M&L for coloured chequred cement concrete tiles ( 25 cmx 25 cm x 25 mm) thick, set, jointed and pointed in neat cement slurry in floor with white cement and pigment including screed bed of 15mm thick in cement screed (1:6) including dismantling old existing treatment complete all as specified and directed.

S&F glazed coloured ceramic tiles of sizes (300mm x 200 mm x6mm) thick on vertical surface over 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

S&F glazed coloured ceramic tiles of sizes (350mmx250mmx7mm thick/ 450mmx300mmx7mm thick) on vertical surface over 10mm thick rendering in cement mortar (1:4 ) complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceedifng 0.18 sqm but not exceeding 0.38 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed in cement mortar (1:4) complete all as specified and directed.

S & F Vitrified Ceramic Tiles 10 mm thick (Square/rectangular) light shade polished area of each tiles not exceeding 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match incl 15 mm thk screed bed in cement mortar (1:4) complete all as specified and directed.

S & F Largo Stepon VerdeTiles of somany or equivalent of other make, 12 mm thick size of 300x1200 light shade of any colour, matt finished, brand -durastone steps, in plain pattern for step of trade and riser etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match incl 15 mm thk screed bed in cement mortar (1:4) complete all as specified and directed.

S & F Bon Pastoral Brown Tiles of somany or equivalent of other make, 10.6 mm thick size of 600x1200 light shade of any colour, matt finished, brand -Ceramic, Marvele, in Random pattern for floor etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match incl 15 mm thk screed bed in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in cement mortar (1:6) on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick cement plastering in cement mortar (1:4) on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L 5mm thick cement plastering in cement mortar (1:3 ) on ceiling surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) complete all as specified and directed.

Taking down chowkats with shutter exc 1.50 but n.exc 4.00 Sqm each (without taking off shutter for the chowkats ) complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.

S & F Pressed steel frames of size (125mm x 60 mm) for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S & F Pressed steel frames of size (105mm x 60 mm) for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F Solid PVC Door Frame of size ( 50 mm x 47mm) made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S & F mild steel flat iron as in hold fast and similar small articles conforming to Fe 290 Gde E 165 complete all as specified and directed.

M & L for PCC (1 : 3 : 6) type C0 using 12.5 mm graded stone aggregate as in filling inside frame or steel chowkhats of doors and windows complete all as specifed and directed.

M & L for PCC (1 : 3 : 6) type C-1 using 20 mm graded stone aggregate as in fixing of hold fast including necessary form work complete all as specifed and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specifed and directed.

S&F 2nd class hard wood 35 mm thick factory made plain famed, paneled shutter (Two panels) with lock rail and panel of 12mm BWP commercial ply or 12mm veneered particle board with commercial veneering on bath pans. The size of rail and style as per IS –1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick Factory made glazed & skelton shutter of 2nd class H.W open rebated and prepare to receive the glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beeds for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specifed and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or welded complete all as specifed and directed.

S & F MS work as in widnw guard bars, plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks all as specified complete all as specifed and directed.

S&F Alum anodized barel tower bolt (ISI mark) of extruded sec 200mm long complete all as specifed and directed.

S&F Alum anodized barel tower bolt of extruded sec 150mm long complete all as specifed and directed.

S&F Alum anodized barel tower bolt of extruded sec 100mm long complete all as specifed and directed.

S&F aluminium alloy handle cast type anodized of size 150mm long complete all as specifed and directed.

S&F in repair aluminium alloy handle cast type anodized of size 150mm long complete all as specifed and directed.

Supply only butt hinges med weight cold rolled mild steel 100mm size long complete all as specified and directed.

S&F in repair but hinges med weight cold rolled mild steel 100mm size long complete all as specified and directed.

S&F 100mm size Butt Hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B22 complete all as specified and directed.

S&F 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F in repair 75 mm aluminium anodised hasps and stapple safety type, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F 300 mm ordinary rat rail made of MS rod pattern spring including roller and roller plate complete all as specified and directed.

S & F in repair curtain rod PVC coated anodised aluminium alloy rod 25 mm bore with fixing fancy type brackets, stops, rollers, side dooms etc complete all as specified and directed.

S & F Anodised aluminium frames for doors, windows,ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S & F Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screw etc complete all as specified and directed.

S & F Anodised aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2no.) suitable handle 1 no.) complete all as specified.

Taking up or down steel tubing and connectipons including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connectipons including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 15 mm bore of pipe complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position (wall, floor, ceiling etc) or 15 mm bore of pipe complete all as specified and directed.

S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 20 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) or 20 mm bore of pipe complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of wood primer complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass, pin head type and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F sheet glass 5.5mm thick ordinary quality complete all as specified and directed.

S&F aluminium composite panel using ALUPAN-Make or equivalent having 3mm thick exterior grade PVDF coating as per sample kept in GE offfice and fixed complete all as specified and directed.

S&F sheet glass 8.00mm thick ordinary quality one side decorative complete all as specified and directed.

S&F in repair Vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern) white including fixing bolts, trap includig conection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipe etc etc complete all as specified and directed.

S&F in repair for PVC low level flushing cistern 10ltr capacity, with cyphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc incl PVC connection 450mm long as spd and fixed in repair all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm dia bib tap standard of PTMT any colour screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms all as complete all as specified and directed.

S & F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed of size 15 mm complete all as specified and directed.

S&F in repair 15mm dia stop valve standard of PTMT any colour screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed.

S&F in repair 20mm dia stop valve standard of PTMT any colour screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed.

S&F in repair 15mm dia CP concealed type with long shank and capstan head for (Bath shower) in repair complete all as specified and directed.

S&F in repair PTMT shower rose 125mm size with swivel joint fancy type complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S & F in repair 15 mm bore Pillar Taps cast copper aloy with capstan heaes, chromium plated screwed down high presssure with or with out lettered Hot of Cold with long srewed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S & F PVC Jet connectoor suitable for EWC all as specified and directed by Engineer-in-Charge.

S&F in repair 20mm ball valve high pressure of PTMT with eposy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min wt 20mm 210 gms) complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layer ,white (cylindrical vertical with closed up, capacity in 500 Ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part-I. include is dismantling of existing water tank etc complete all as specified and directed. conforming to cart part No CCWS 0050-02-TLW of sintex or equivalent to specified make.

S&F rotational moulded polyethylene water storage tanks, triple layer ,white (cylindrical vertical with closed up, capacity in 1000 Ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part-I include is dismantling of existing water tank etc complete all as specified and directed. conforming to cart part No CCWS 0100-01-TLW of sintex or equivalent to specified make.

S & F in repair Grating 125 mm dia with with waste hole of PTMT complete all as specified and directed.

S&F in repair CP brass towel rail `D’ type 60Cm long fixed to wall complete all as specified and directed.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed.

Supply & Fixing in repair 32 mm dia PVC Waste pipe suitable for Wash hand basin complete all as specified and directed.

Supply & Fixing in repair 40 mm dia Kitchen sink waste coupling suitable for Wash hand basin complete all as specified and directed.

Supply and Fixing in repair Vitreous China Urinals flat back of size 465 x 355 x 265 mm, bowl type including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass srews and pointifng aroun urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and unior for discharge pipe including fixing supply pipe to flushing cistern trap and waste pipe

S&F in repairs CP Health faucet with 1 Mtr tube and hook complete all as specified and directed.

S&F in repair 15mm brass CP mixer (single hole) for mixing hot & cold water screwed down for iron pipes and fixed complete all as specified and directed.

S&F in repair Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & Fixing in repair 0.63 mm thick Plain galvanised mild steel sheeting fixed with screws as in crumple, velly gutter and bathroom door etc. Joints complete all as specified and directed.

M&L prepartion of old wood & wood based surfces of any decsription not other wise described over 10cm width or girth and apply one coat of syn enamel paint all as specified and directed by Engineer-in-Charge.

M&L prepartion of old painted steel surfces of any decsription not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for one coat of white wash on old decorated wall surfaces including preparation complete all as specified and directed.

M & L for one coat of white wash on old decorated ceiling surfaces including preparation complete all as specified and directed.

M & L three coat of white wash on new plastered wall surfaces including preparation all as specified and directed by Engineer-in-Charge.

M & L One coat of Oil bound distemper on old decorated wall suerfaces including wall care putty for preparation of surface complete all as specified and directed.

M & L Two coats of Oil bound distemper on new plastered wall suerfaces over 1mm thick wall care putty including preparation complete all as specified and directed.

M & L one coat of Cement based paint on old decorated wall surfaces including preparation complete all as specified and directed.

M & L for two coats of Cement based paint over a coat of primer on new plastered wall surfaces including preparation complete all as specified and directed.

M & L three coat of white wash on new plastered Ceiling surfaces including preparation complete all as specified and directed.

M&L for Preparation of old surfaces and applying One coat of acrylic emulsion, exterior grade, weather proof paint any colour on walls complete all as specified and directed.

M&L for Preparation of Newly plastered surfaces and applying two coat of acrylic emulsion, exterior grade, weather proof paint any colour over one coat of primer on walls complete all as specified and directed.

M & L for one coat of colour wash on old decorated wall surfaces including preparation complete all as specified and directed.

Dismentaling of asbestos cement (Corrugated, semi corrugated etc) sheetiting in roof covering complete all as specified and directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, fixed with L type or J type or cranked hook bolt

M&L Pre painted zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering , fixed with self taping screw all as specified and directed by Engr In Charge.

S&F for Pre-painted zinc coating GI based Plain steel sheet 0.50mm thick of anycolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation, incl snap grid etc) or insulation boards / slabs / blankets any thickness including cover fillets as specified and directed.

S&F in Repair False Ceiling Horizontal level regular edge grid 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as per manufactured instruction complete all as specified and directed.

Writing letter or figures (Block, roman, Itallic or Indian ) with synthetic enamel paint height n. exc 30cm complete all as specified and directed.

Removing existing water proofing treatment of any type all as directed by Engineer-in-charge and disposing off out side Defence Land, Cleaning the surface by roughening, sweeping clean and washing down and applying cement slurry @ 3 kgs/sqm & M&L for 40mm thick cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in RCC roof surface with mixing of water proofing compound 3% by the weight cement to horizontal or vertical surfaces finished cement concrete surface even and smooth using extra cement including necessary form work all as specified and directed.

M & L for water proofing treatment to roof slab with APP modified polymeric membrane with centre core 100 micron HMHDPE out film 20 micron each having thickness 3 mm, weight not less than 3.00 kg/sqm with 100 mm side overlap and 150 mm end lap and laid with following course of descriotion below :- (a) Applying evenly a coat of bituminous primer conforming to IS 3384 - 1965 @ 0.50 ltr /Sqm prepared surface till the surface is properly impregnated and solvent oil in primer shall be allowed to evaporate completely. Second coat of bonding material using hot blown grade bitumen 85/25 @ 1.2 Kg/Sqm conforming to IS 702 - 1988 over bituminous primer. (c) Third course i.e. laying of APP modified polymeric membrane describe hereinbefore with 100 mm over lap in longitudinal direction and 100 mm in transverse direction, all joints and changes in all diretion should be curred with cement mortar (1 : 3 ) mixted with SBT Latex @ 200 ml per bag of cement and curred well before laying themembrane. (d) Fourth course of bonding material using hot blown grade bitumen 85/25 confirming to IS 702- 1988 @ 1.2 kg/sqm over membrane. (e) Fifth course is sprinkling a layer of course sand dusting @ 1 Kg/Sqm as directed.

Taking down Chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) for repair to chowkhats and shutters and refixing in same opening complete all as specified and directed by Engineer-in-Charge.

S&F in repair double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed

p k enterprises

M/s Moti Babu Agarwal