Chahapada Kanpur Road__BUSG,PMC,SC 1.600 to 2.200

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 of MORD specification for Rural roads and as per the direction of the Engineer-in-Charge.

Labour for scarping cleaning the road surface applying tack coat using 3.00 kg of bitumen for 10 Sqm and laying 37.5 mm thick built-up spray grouting in one layer using 0.45 cum of 25 mm to 40 mm size hard granite metal and 12.00 kg of 80/100 grade bitumen for 10 Sqm with 0.12 cum of 12mm size h.g.c.b. chips as key stone for 10 sqm spreading over and laying including heating , pouring and spreading over and spreading bitumen, metal , chips and rolling with P.R.R including hire & running charges of P.R.R and all other machinaries with all cost, conveyance, royality, taxes of materials, labour with T&P required for the work etc. complete as per specification and direction of Engineer-in-charge.

Providing and applying tack coat using bitumen of 60/70 grade @ 0.2kg per sqm on the prepared bituminous surface cleaning with hydraulic brooms including cost of all materials, labour , T&P etc. complete as per the specification and direction of the Engineer-in-Charge.

Providing and laying 20mm thick Open Graded Premix Carpet using 13.2mm to 5.6mm size C.B.H.G. stone aggregates using mini Hot mix Plant over prepared surface using a total quantity of 14.6 kgs of 80/100 or 60/70 grade Bitumen per 10.0Sqm and compacting with 8 -10T power road roller including hire & running charges of PRR, T&P, cost conveyance royality & taxes of all materials,labour charges for cleaning the surface spreading laying and cambering premix carpet for finished item of work etc.complete as per the specification and direction of the Engineer-in-Charge

Providing & laying 6mm thick pre-coated seal coat type-B using 0.06cum of 6.7mm size C.B.H.G.chips as per sieve analysis & 6.8kg of 80/100 or 60/70 grade bitumen per 10sqm including hire and running charges of PRR, Hot mix plant, tar boiler & all other T&P articles including cost, conveyance, royalty, taxes of all materials etc. complete as per specification and direction of the Engineer-in-Charge.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads , transporting to site by mechanical means within a lead of 5 kms spreading , grading to required slope and compacting to meet requirment of table 300-2 & clause 305 of MoSRT&H Specification for road & Bridges Work