SPECIAL REPAIR TO BOUNDARY WALL OF RESIDENTIAL AND OFFICE COMPLEX OF CQA EE AUNDH CAMP PUNE

Amount

Demolition of brickwork, block or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, all as specified.

Demolition of reinforced cement concrete in ground floors and pavings exc 15 cm thickness (below or above ground level) all as specified

Demolition of cement concrete below and above ground floors and pavings exc 15 cm thickness (below or above ground level) all as specified

Dismantling wrought iron or mild steel work of any discription all as specified and directed by Engr-in-Charge.

Excavating in trenches in soft soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out all as specified

Excavating in trenches in soft soil, n.exc 1.5 m wide and exc 1.5 m & n. exc., 3m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and exc 1.5 m in depth and getting out all as specified

Removing excavated soil material exc. 250 m but n exc. 500 m and depositing where directed from starting point all as specified

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as specified

M&L for RCC Type B1 1:2:4 (20mm graded aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for RCC Type B1 1:2:4 (20mm graded aggregate) in columns, pillars, piers, posts and struts all as specified

S&F of TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified

All as item no 11 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified

Formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified

M&L for Pre-cast cement concrete block masonry with solid blocks TypeC1 1:3:6 (20mm graded aggregate), exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of cement plaster in CM 1:4 all as specified

M&L for providing cement concrete type C1 1:3:6 (20mm graded aggregate) as in coping all as specified

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete all as specified

M&L for cement concrete type B2 1:2:4 (40mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) all as specified and directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W(Gde-E-250) all as specified

M&L for providing precast cement concrete louvres and jallies type C0 1:3:6 (12.5mm graded aggregate), 25mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:6 complete all as specified and directed.

M&L for preparaing newly plasered surfaces of walls including preperation of surfaces and applying two coat of cement base paint on walls surfaces over one coat of cement wash with cement slurry to a smooth bodied opaque finish complete all as specified.

M&L complete removal of existing treatment & for preparaing newly plasered surfaces of walls including preperation of surfaces and applying two coat of cement base paint on walls surfaces over one coat of cement wash with cement slurry to a smooth bodied opaque finish complete all as specified.

M&L for preparetion of old steel surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with one coat of synthetic enamel paint on a coat of red oxide primer all as specified.

M&L for preparetion of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coat of synthetic enamel paint on a coat of red oxide primer all as specified.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed.

Refixing of galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed.

M/S JAYCONSTRUCTION CO

M/S J J ENTERPRISES

Shri Sant Cosntruction

M/S SANDEEP CONSTRUCTION COMPANY

M/s DEVRATAN ENTERPRISES