Repairs and Renovation of Rajagopuram, All sannathies, Thirumathil Suvar and Providing Outer Praharam Cutstone in Arulmigu Kaliyugavaratharaja Perumal Thirukoil at Kuzhumur Village, Sendhurai Taluk, Ariyalur District.

Amount

Removal of lime concrete from the top of roof and clearing the debris from the site etc complete complying with standard specification

Numbering removing and stocking the cutstone materials use full re use etc complete. including all labour charges etc complete with standard specfication

For wall and Pavukkal

For Uthiram, Bothiyal, Pillars

Dismantling of brick work in lime mortar and clearing away the debrsi from the site including all labour charges etc complete with standard specification

Providing scaffolding charges for Vimanam/Gopuram with steel posts non- flammable shade wherever necessary for main formwork and providing ladder arrangements, centering steel sheet for working inspection etc., complete as per standard specification. Hire charges for errection and maintenance and removing the same on completion of work upto various height

Vimanam height 50'

Vimanam height 25'

Vimanam height 15'

Supply of cut stone like Uthiram, Pavukkal, Wall for Temple Structures upto 10 feet length including all labour charges for fixing in position etc complete complying with standard specification.

For Pillar, Uthiram, Pavukkal

For wall, Thirumathil suvar

Re-Fixing the cutstone materials like pavukkal, uthiram, bothiyal, pillar and wall etc complete. including all labour charges etc complete with standard specfication

Dressing and fixing of new cutstone materials like Uthiram, Pavukkal, Wall for Temple Structures upto 10 feet length including all labour charges for fixing in position etc complete complying with standard specification.

For Pavukkal

For Uthiram

For Bothiyal

For Pillars

For Wall

Providing dressing the cutstone flooring and pointing with lime mortar 1:1.5 (one lime, one and half of sand) including all labour charges etc complete

Ornamental Brick work in LM 1:2 mix using II Class ground Moulded Chamber Burnt Bricks of size 9" x 43/8" x 23/4"all vari vargams, moulds, sthambas, mukapatram, koodu, nasi, and all ornamental brick workcomplete panchavarnam agaraies, karnakoodus etc forming core walls rajagopuram/vimanams complete in cluding cement al labour chagers

Gopurm ht 50'

Vimanam height 25'

Vimanm height 15'

Kalkaram

Brick work in lime mortar 1:2 (one of lime, two of sand ) using country bricks of size 83/4" x 41/4" x 23/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc complete complying with standard specifiction.

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in combination mortar 1:1:5 (one of lime,one cement and five of sand ) using country bricks of size 83/4" x 41/4" x 23/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc complete complying with standard specifiction.

Plastering with lime mortar 1:1.5 (one of lime, one and half of sand ), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Paving with cut stone flooring using cut stone of size600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with lime mortar 1:1.5 including all materials and labour charges.

Providing vargapoochu over the core walls of vimanams/Gopurams,with lime mortar 1:1.5 complete including Shaping the mukhapathram, mahanasi, koodu all ornamental works to proper shape by embedding broken bricks of shaped/chiseled bricks , rough plastering with lime mortar 1:1.5 and finshing with final ornamental plastering nayam theervani including cost and conveyance of all materials, labour there fore lifting of materials, all working in heights curing with water etc complete including all extra for folding and including clearing from the vimanams/gopurams 100 sft superficial area for kalkaram.

Vimanam 50' ht

Vimanam 25' height

Vimanam 15' height

Kalkaram

Painting with multicolour (panchavarnam) good emulsion paints complete for the vimanams/gopurams, including cost and conveyance of all materials , labours charges including artist painter, working in heights, lifting of materials,cost of brushes etc, complete which including all extra for foldings 100 sft

Vimanam 50' ht

Vimanam 25' height

Vimanam 15' height

Painting two coats of newly plastered wall surface with ready mixed water based emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing water washing to existing cutstone masonry work for the removal of lime wash on stone and other deposits like soot and enamel paints.

Pointing the stone joints with lime mortar 1:1.5 (one of lime, one and five of sand) after rackingout the stone joints including erection of scaffolding charges etc complete.

Supplying and fixing ornamental teak wood temple pattern door of following size with four leaves as per the drawing approved by the departmental officer. The outer frames are four horizontal and two vertical santling. Shutter frame are two scantling.The panel shall have 20mm thick best and approved quality teak wood plank. the shutter shall be equal planks. the rate including cost of the best quality teak wood, Brarees Hinges, Tower bolts, Air drops ornamental Handles. The door frame and Shutter gives two coat best quality synthetic enamel paint.

Door size 7'X11'

Door size 3'X5'6''

Door size 3'6''X6'0''

Door size 4'0''X7'0''

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Weathering Course in brick jelly lime concrete using broken brick jelly of size 20 mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finishing by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water etc, complete as per standard specifications.

Finishing the roof top roof with lime mortar, 25mm thick including all labour charges etc comple with standard specification

Wirk with 2X1.5 Sq.m (22/0.30) PVC insulated single core unsheated copper conductor of 1000v grade in existing 35mmX45mm power coated duct with door arrangements on wall and ceiling with MS accessoires with module GI Fausetjole on wall with 6A one way module switch colour with continuous earth wire connection of 14SWG TC wire for open MS duct light point/fan point/e;ectronic regulator/5 points/coil highter end (DATA-A)

Supply and run of 35mm x 45mm powder coated duct with door arrangements on wall and ceiling with MS accessiores. (Data B)

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End (S D 462)

Supply and fixing of single box type 1 x 20 W single LED fitting complete with TW round blocks on wall or ceiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting. (Data C)

Supply and fixing of 450MM Wall mouning FAN complete with necessary MS clamps & AI frame. (Data D)

Supply and fixing of fancy glass shade and 9W LED for BH point. (Data E)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete With S&F of Suitable AI frame on wall with PVC unsheathed copper leads with MS clamps with S&F of SMC box with 10 SPMCB (Higher end ) and with painting (Data F )

Supply and fixing of 4" x 4" MS powder coated box with cable gland, ceiling rose and with electrical connections complete. (Data G )

Supply and fixing of 3 nos.6A two module 5 pin socket, 3 nos. 6A one module switch on suitable module surface mounting Box ( GI ) with module cover plate (plastic) on wall with connections. Higher End (SD 474 )

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End ( SD 486 }

Supply and fixing of MS clamps of size 1¼' x 1¼' on pillar with suitable Bolt / nuts and painting of suitable colour. (Data H )

Supply and run of MS angle with necessary clamping arrangements on the pillars with neccesaary accessories as directed by the departmental officer. (Data I )

Supply and clamping of 4 x 1.5 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps. (Data J)

Supply and clamping of 2x 4 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps. (Data K )

Supply and laying of 2 x 4 sq.mm PVC LTUG armoured copper cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (Data L )

Supply and fixing of brass cable gland for 2 x 4 sq.mm. PVC LTUG armoured cable with earth connection (SD 180 )

Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD 202)

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps. (SD 220)

Supply and fixing of brass cable gland for 4 x 25/ 10 sqmm PVC armoured LTUG cable with earth connection. (SD 185)

Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (Data M )

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 600 )

Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 632 )

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD 68 )

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains.( SD 73)

Supply and fixing of powder coated box on wall fabricated with MS sheet of 16 gauge of size 900mm x 300mm x 450mm with 3 nos. of 63A (500V) porcelain fuse units, 1 no. of 63 TPN sheet steel double break switch with HRC Fuse units provision for fixing TNEB meter with electrical connections complete. (Data O )

Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD 734)

Supply and fixing of 32A DP MCB in sheet steel enclosure box with electrical connections complete. (Data P )

Earthing as per the PWD standard with an earth electrode of 2mt class 'B' GI pipe of dia not less than 32mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD 234)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD 458)

Sub total

Arivazhagan K