Repairng of electrical pumps 250,120,40,25,10,7.5HP etc,supplying installing and repairng of Submerssible pumps,repairnig of transformer 600 400 KVA for year 2025-26

Amount

Repairing of 0.75 HP to 40 HP pump

Supplying and erecting submersible pumpset of 0.75 HP 12STAGE with 230 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 20 to 80 LPM discharge at 55 to 25 m head and (max. efficiency at 41 m head & 50 lpm) discharge & delivery Pipe of Size-50mm dia. with a necessary H type clamps as per specification no. WP-SMP

Supplying and erecting 1 phase 230V 50Hz submersible pumpset of 0.75 KW/1HP for erection on open well, pump having discharge 35/270 L.P.M head 30/15m & pipe of suction 32mm/Delivery 25mm diameter erected with neccessory H type clamps as per specification no. WPOSP

Supplying and erecting submersible pump set suitable for erection on open well of 2.25 KW/3 HP with 415 V 50 c/s.A.C. supply, having delivery head from 21 to 7 m and discharge from 200 to 800 Itrs. per minute (Max efficiency at 16 m head & 500 Itr discharge) & pipe of Suction 50mm /Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP

Supplying and erecting submersible pump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50 c/s.A.C. supply, having delivery head from 24 to 13m. and discharge from 400 to 1000 Itrs. per minute (Max efficiency at 21m head & 680 Itr discharge) & pipe of Suction 50mm / Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP

Supplying and erecting submersible pump set suitable for erection on open well of 5.625 KW/7.5 HP with 415 V 50 c/s.A.C. supply, having delivery head from 20 to 10m and discharge from 450 to 1600 Itrs. per minute (Max efficiency at 17 m head & 1250 Itr discharge) & pipe of Suction 65 mm/Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP

Supplying and erecting submersible pump set suitable for erection on open well of 10 HP with 415 V 50 c/s.A.C. supply, having delivery head from 20 to 10m and discharge from 450 to 1600 Itrs. per minute (Max efficiency at 17 m head & 1250 Itr discharge) & pipe of Suction 65 mm/Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP

Supplying and erecting D. O. L. Starter suitable for 250V. single phase, 50 cycles with overload element with necessary materials and connected to supply upto 3 H.P.

Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 H.P.

Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 10 H.P. star delta

Supplying and erecting flat flexible 3 core 1.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting flat flexible 3 core 2.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting high density polythene pipe ISI mark 32 mm dia. suitable for pressure of minimum 8 kg/cm2 connected to jet/submersible pump with required material complete.(HDPE Pipe)

Rewinding of 100 mm submersible motor from 0.75 HP to 2 HP with old wire

Rewinding of openwell submersible motor 3 HP with old wire

Rewinding of openwell submersible motor 5 HP with old wire

Rewinding of openwell submersible motor 7.5 HP with old wire

Rewinding of openwell submersible motor 10 HP with old wire

Removing and dismentling of borewell submersible 2 HP pump from 200 feet boring depth with testing.

Refitting and assemble of openwell/verticle submersible 3 HP/ 5 HP pump from site with testing.

Reffiting borewell submersible 2 HP pump from 200 feet boring depth with testing.

Refitting and assemble openwell/verticle submersible 3 HP/ 5 HP pump from site with testing.

Providing and fixing SS tepar nepal with nutbolt.

Removing and dismentling of openwell submersible 01 HP pump from site with testing.

Refitting and assemble of openwell/verticle submersible 7.5/10 HP pump from site with testing.

Refitting of openwell submersible 01 HP pump from site with testing.

Refitting and assemble of openwell/verticle submersible 7.5/10 HP pump from site with testing.

Repairing starter for upto 2HP submersible pump from site with capcitor and contact kit,push button etc.

Repairing starter for upto 7.5 HP with suitable Relay, contact kit, coil etc.

Repairing starter for upto 10 HP with suitable Relay, contact kit, coil etc.

Repairing borewell/submersible pump upto 2 HP at contractor"s workshop with shaft welding, threading, balancing, finishing, cutting.

Repairing borewell/submersible pump upto 3HP/5 HPat contractor"s workshop with shaft welding, threading, balancing, finishing, cutting.

Repairing borewell/submersible pump upto 7.5 HP/10 HPat contractor"s workshop with shaft welding, threading, balancing, finishing, cutting.

supplying and erecting Bronze bush as per size 0.75 HP/ 1 HP/ 2 HP/ 3 HP / 5 HP pump.

supplying and erecting Bronze bush as per size 7.5 HP/ 10 HP pump.

supplying and erecting of impellar of 0.75 to 2 HP borewll pump.

supplying and erecting of impellar of 3 HP to 5HP openwell pump.

supplying and erecting of impellar of 7.5 HP to 10 HP openwell pump.

supplying and erecting of bore cap, patta clamp and hardware.

supplying and erecting thrust bearing with suitable size 0.75 HP to 2 HP borewell pump.

supplying and erecting thrust bearing with suitable size 3 HP to 5HP openwell pump.

supplying and erecting thrust bearing with suitable size 7.5 HP to 10 HP openwell pump.

supplying,erecting and commissioning fountain lamp (LED) IP 66 (Water proof) with M.S.bracket and hardware and all other required accessories

Providing and Fixing Centrifugal pump of 20 HP capacity.

Removing Centrifugal pump set from site by labour with all required accessories

Reffiting Centrifugal pump set from site by labour with all required accessories

Repairing of Centrifugal pump at contractors workshop for shaft welding, threading, balancing, finishing, cutting etc. complete.

Overhauling of bear motor with warnishing, greesing, heating, shaft welding, finishing.

supplying and erecting of central pin bush couple with suitable size.

supplying and erecting of 150 mm foot valve make Normex Boll Type, Flanged etc.

supplying and erecting induction motor bearing with front/ rear side make SKF/FAG.

supplying and erecting pump shaft SS sleeve (Grade 431) size as per required

supplying and erecting of glan rope, Pu tube valve, rubber sheet and hardware.

Repairing of 20 HP starter with Relay contractor, No volt coil, NO-NC push button.

Removing and Reffiting of flocculator complete set with fan from WTP plant by labour with all required accessories with transportation upto contractor workshop

Removing and refitting of gear box, motor on the site for flocculator WTP by labour with all required accessories with transportation upto contractor workshop

Repairing of gear box, motor on the site for flocculator with cleaning, greesing, warnishing,heating pin bush coupling, etc. complete.

Repairing of gear box, motor for mixing of TCL powder unit.

Repairing of flocculator with shaft welding, threading, balancing, finishing, cutting, machining, bearing and hardware etc. complete.

120 HP V.T. pumpset

Supply and erecting of Bronze bearing as per requirement.

Supply and erecting of Bronze neckring as per requirement.

Supply,erecting and comissioning Bowl assembly S.S. shaft Grade 431 as per size.

Supply,erecting water lubricated (NBR) bush bearing as per size with metal sel

Supply,erecting of shaft sleeve (Grade 431) as per size.

Machining of bowl impeller.

Supply,erecting and commissioning column pipe nut-bolt as per size for 01 column pipe joint .

Repairing of old shaft with welding, threading, balancing, finishing, cutting, machining etc. complete.

Removing shaft sleeve from line shaft.

Supplying erecting and comissioning new line shaft (Grade 410)

Removing of failed Complete V.T. pumpset from jackwell with motor with transport and labour

Reffiting of Repair Complete V.T. pumpset from jackwell with motor with Testing with transport and labour

Removing of failed V.T. pumpset motor part only ith transport and labour

Reffiting of V.T. pumpset motor part only with testing ith transport and labour

Overhauling of hollow shaft TEFT motor with Heating, greesing, survising and warnishing etc. complete.

Cleaning of motor, bowl assembly, column pipe etc. with paint.

Removing bowl assembly for repairing purpose at contractor"s workshop with labour ,transport and all required accessories

Refitting bowl assembly etc. complete.with labour ,transport and all required accessories

Rewinding Induction motor class (F) insulation with old copper wire.

Supply and erecting of V.T. motor top side thrust bearing make SKF, FAG.

Supply and erecting of V.T. motor bottom side ball bearing make SKF/FAG.

Supply and erecting of glan rope, Pu tube valve, rubber sheet and hardware.

Machining of column pipe with both ends side face surface etc. complete.

Supply and erecting of tuffing box bronze bush as per required size.

Supply and erecting of tuffing box shaft spacer sleeve (Grade 431) as per required size.

Supply and erecting of 20/40 no. oil for motor / Auto.

Supply and erecting bowl assembly stenar as per company

Supply and erecting of pressure guage with sutaible ss pipe

250 HP V.T. pumpset

Supplying and erecting of bowl assembley stenar as per company

Supplying and erecting of Bronze bearing as per requirement.

Supplying and erecting of Bronze neckring as per requirement.

Supplying and erecting Bowl assembly S.S. shaft Grade 431 as per size.

Supplying and erecting water lubricated (NBR) bush bearing as per size with metal sel

Supplying and erecting of shaft sleeve (Grade 431) as per size.

Machining of bowl impeller.

Providing and fixing column pipe nut-bolt as per size for 01 column pipe joint .

Repairing of old shaft with welding, threading, balancing, finishing, cutting, machining etc. complete.

Removing shaft sleeve from line shaft.

Providing and fixing new line shaft (Grade 410)

Removing of failed Complete V.T. pumpset from jackwell with motor with transport and labour

Reffiting of Repair Complete V.T. pumpset from jackwell with motor with Testing with transport and labour

Removing of failed V.T. pumpset motor part only with transport and labour

Reffiting of V.T. pumpset motor part only with testing with transport and labour

Overhauling of hollow shaft TEFT motor with Heating, greesing, survising and warnishing etc. complete.

Cleaning of motor, bowl assembly, column pipe etc. with paint.

Removing bowl assembly for repairing purpose at contractor"s workshop then refitting bowl assembly etc. complete.

Rewinding Induction motor class (F) insulation with old copper wire.

supplying and erecting of V.T. motor top side thrust bearing make SKF, FAG.

supplying and erecting of V.T. motor bottom side ball bearing make SKF/FAG.

supplying and erecting of glan rope, Pu tube valve, rubber sheet and hardware.

Machining of column pipe with both ends side face surface etc. complete.

supplying and erecting of tuffing box bronze bush as per required size.

supplying and erecting of tuffing box shaft spacer sleeve (Grade 431) as per required size.

supplying and erecting of 20/40 no. oil for motor / Auto.

supplying and erecting of spaydar as per size

supplying and erecting tufing box to column pipe connector as per required size

supplying and erecting of bowl assembley suitable pump distance as per standard

ATS STARTER 120 HP

Providing and fixing of main contactor with suitable current capacity 415 V ,50 Hz. Make L&T.

Providing and fixing of thermal overload Relay with suitable current capacity 415 V ,50 Hz. Make L&T.

Rewinding of Auto transformer class F insulation with old copper wire.

Removing and refitting of Auto transformer from site jackwell with labor and transportation.

Providing and fixing bushbar, lug, nutbolt,connection wire, insulator, No.NC switch, Voltmeter, Ammeter, CT coil.

Providing and fixing starter to auto flexible wire suitable current capacity with lug etc.

Providing and fixing no volt coil for main contactor 415 V ,50 Hz.

Providing and fixing 120 sq.mm diameter , 3.5 core aluminium cable.

Providing and fixing 400 sq.mm diameter , single core aluminium cable.

Providing and fixing 500 sq.mm diameter, single core aluminium cable.

Providing and fixing Power Capacitor to heavy duty per KVA.

Providing and fixing Du 100 switch for capacitor use 100A, 415V, 50Hz.

Repairing of 800 A (ACB) with required switch gear and refitting on site with testing 415V, 50Hz.

Repairing of 1600 A (ACB) with required switch gear and refitting on site with testing 415V, 50Hz.

Removing and refitting of (ACB) 800A/1600A from control panel for repairing purpose with transport , labour and testing etc.complete.

ATS STARTER 250 HP

Supplying erecting and comissioning of main contactor with suitable current capacity 415 V ,50 Hz. Make L&T.

Supplying erecting and comissioning of thermal overload Relay with suitable current capacity 415 V ,50 Hz. Make L&T.

Rewinding of Auto transformer class F insulation with old copper wire.

Removing and refitting Auto transformer from site with labour and all required accessories with transportation

Supplying and erecting bushbar with suitable size with lug ssnut,wire,insulator,NO NC switch Voltmeter ammeter CT Coil

Providing and fixing starter to auto flexible wire suitable current capacity with lug etc.

Providing and fixing no volt coil for main contactor 415 V ,50 Hz.

Supplying and erecting air circuit breaker manually operated drawout type of 1600A rated at 50º C without deration, 500V, 3 pole having short circuit rating 50 kA (Ics=Icu=Icw for 1s),with standard accessories and thermal magnetic release on provided iron frame as per specification no. SW-SWR/ACB(For electrical drawout type ACB)

40 HP Air Compressor

Removing and Reffiting of bear motor for repairing purpose from WTP by labour and transportation

Removing and Refitting of air compressor of air compressor for sevicing purpose with testing etc. by labour and transportation

Repairing of star delta starter with Relay, contact kit, body, No NC switch etc.

Repairing of motor shaft with welding, cutting, finishing, threading, chabi gala etc.

Repairing of bear motorwith heating, warnishing, greesing, survicing, shaft welding, machining etc. complete.

Repairing of flow transmeter with sensor & calibration as per company Standard Dia 700mm(ms pipe

providing & fixing of transmitter (flow meter) without sensor with Suitable cable ,overloaded protection device & company engineer Site visit Etc Complete pipe Dia 700mm(adept make )

providing & fixing sensor with suitable dia 700mm with welding,cutting ,finishing,calibration certificate & company engineer site visit etc (adept make)

Reparing of Transformer 600 300 KVA

Removing and Reffiting of 630 KVA transformer from girna pumping house with labour, transport, crane charges etc. complete.

Removing and Reffiting of 400 KVA transformer from WTP with labour, transport, crane charges etc. complete.

Filtration of Transformer oil on site till satisfactory test results

Supplying and topping up filtered transformer oil of approved make with test certificate.

Rewinding of 400 KVA transformer with standard winding wire including old copper wire, gasket, insulator etc.complete.

Rewinding of 630 KVA transformer with standard winding wire including old copper wire, gasket, insulator etc.complete.

Repairing of Crane 7.5HP run

Repairing of chain pulley ,main motor with servicing greesing etc

Repairing left side motor with servicing greesing etc

Repairing right side motor with servicing greesing etc

Repairng of control panel with suitable contractor,coil etc

NEW ADVANCE ELECTRICALES (BID ID -6557940)

OM SHRI MANGALMURTI ELECTRICALS AND CONTRACTORS (BID ID -6556443)