Provision of fire fighting work under EE(E) Rohini, MTNL Delhi

Amount

S.I.T.C of Photo Electric type smoke detector with mounting base,UL/FM/LPC approved complete with connections as required. (Make M/S Edward /System Sensor / Apollo / Agni)

S.I.T.C of ROR cum Fixed temperature type heat detector ULC Listed/FM approved complete with connections as required. (Make Edward / Chemetron / Apollo / Agni)

S.I.T.C of manual puse button (Pill box) made out of 16 gauge sheet body with chain & hammer to break the glass complete as required. (Agni / Electroquip / S.S Make)

S.I.T.C of Response indicator made out of 16 gauge M.S. sheet with dual LED indicator etc. complete as required. (Agni / Electroquip / S.S Make)

S.I.T.C of Electronic hooter cum speaker with built in speaker mounted in a moulded poly-carbonate body in cream colour with screw in front toremove cover plate suitable for 24 volt DC operation etc. as reqd. (Agni / Electroquip / S.S Make)

S.I.T.C. of 4 Zone Microprocessor control main fire alarm panel (basic model) having independent power supply, battery charger , zone wise audio visual indication of fire / open / short test botton and 2x12V -7 AH capacity maintenance free battery etc. complete as required.(Agni/Safeway/Electroquip/S.S. Make),(Battery-Exide/Standard/ S.S.Make)

S/F of fallowing sige armoured copper conductor cable on surface of wall/ ceiling/ tray with the help of saddles, pvc sleeves, screws, etc.complete as reqd. a) 2x1.5 sq.mm.

b) 4x1.5 sq.mm.

Making end termination of 2x1.5 sq.mm and 4x1.5 sq.mm armoured copper cable with 12 mm brass compression glands etc. complete as reqd.

S/F of 4"x 4" M.S. junction box 18 gauge sheet painted in RED colour with know-out hole an all side complete as required.

S/F following type fire extingushers 6 Kg. capacity, ABC type (Stored Pressure) multi purpose dry powder conforming to IS: 15683:2006, with IS 14609, having ISI marked with required MS brackets hozes qeeze type valve with pressure gauge complete as required.(Life guard / Omex / Fire Guard with ISI marked make)

Supply and fixing of Co2 type fire extinguisher, complete with gunmetal value confirming to IS: 15683 with ISI mark 4.5Kg capacity with discharge hose and horn wall fixing bracket with mfg.test certificates and certificate from the explosive department of Nagpur, complete as per direction of Engineer-in-charge. (Make:-Life Guard / Omex / Fire Guard with ISI marked make.)

S/F of swinging type first Aid hose reel drum ISI Marked, i/c connection with the riser with suitable size MS pipe C-class (without hose) testing etc. as reqd(Make-Life Guard/Omex/SB/New age/Mitras/Padmini/SS make)

Supplying and fixing of one way SS landing valve on riser including making suitable arrangement with MS pipe C-class weling suitable flange along with suitable rubber gasket, nuts and bolts etc. complete as reqd.

S/F of 150mm dia Butterfly valve, on the pipe line, PN-1.6 , fixing the same along with suitable rubber gaskets etc. as reqd.(Make- Kirloskar/LEADER/Audco/Kartar)

Supplying and fixing of 150mm dia MS pipe C class, in existing riser with the help of welding machine and heavy labour, including, providing suitable MS angle iron support, leakage testing, painting with primer and red paint etc. as reqd.(Make- Jindal/Prakash/Tata)

S/F of 4 Kg Capacity, multipurpose, ABC store pressure type, Fire Extinguisher with suitable hose, pressure gaug ISI marked, confirming to IS:15680, etc. complete as reqd. (Make- Life guard/Agni/OMEX/Safex)

Supplying and fixing of non combustible Calcium silicate board of 8mm thick to be fixed at the bottom with necessary support made of steel fabrication all around the opening and divided into three equal parts laterally or as per site requirement fixed by dash fastners and M S flat as support to divide the steel frame in three equal parts longitudinally or as per site requirement in the floor shaft. The floor opening to be further filled with silicate based cementitious type fire proof sealing system mixed with water of retrofit design for sealing of opening through floor shafts and glass wool of density 96 Kg/m3 in the areas at minor opening 100mm thick . The joints etc. shall be sealed with intumscent fire retardant sealant and all work to be completed by specialized workers, as per direction of Engineer-in – charge. ( Flat area of open shaft be measured and no deduction for pipes and cables to be made). Electrical Shafts- a) 300mm x 1000mm

b) 300mm x 600mm

Telephone shafts- a) 300mm x 750mm

Supplying and fixing of silicate based cementitious type fire proof sealing system mixed with water of retrofit design for sealing of opening through floor shafts and glass wool of density 96 Kg/m3 in the areas at minor opening 6mm to 25mm thick . The joints etc shall be sealed with intumscent fire retardant sealant and all work to be completed by specialized workers as per direction of Engineer-in –charge. sizes: a) Upto 150mm dia ( Rate Only)

b) Upto 300mm dia ( Rate Only)

Sample testing at Quality Marking Centre, Department of Industries & Commerce, Govt. of Haryana, for the above specification to be tested to BS 476 part 22 & IS 1245(1988). All the liasioning work and providing necessary prototype sample at the Govt. laboratory shall be in the scope of the supplier and the contractor. All testing fees and cost of sample including liasioning work & providing sample to be paid by the Contractor.