Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC A 46 ARYA NAGAR ALWAR RAJ 301001 | ALWAR | RAJASTHAN | 301001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹38.0 L+₹1.3 L (3.45%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹39.3 L+₹2.6 L (6.96%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | Rejected-Technical | - | Rejected-Technical Not found in order | |
| 5 | Rejected-Technical | - | Rejected-Technical Not found in order |
Tender Value
Refer Docs
EMD Value
₹82,000
Closing Date
15 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
REPAIR TO DAY TO DAY COMPLAINTS, CERTAIN MISC AND ALLIED WORKS UNDER AGE B/R-I AT ITARANA ALWAR
2023_MES_597794_1
8171/E8
Open Tender
Civil Works
Item Rate
240 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹82,000
Yes
7 Aug 2023
23 May 2023
17 Jun 2023
23 May 2023
15 Jun 2023
5 Jun 2023
23 May 2023 - 4 Jun 2023
Amount
Taking down cement plaster of any description on walls, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed.
M&L demolition of concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing debris to location outside defence land complete all as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including wall quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles.
M&L fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 complete all as specified and directed.
M&L 15mm thick rendering on fair faces of brick work or stone masonry or concrete surfaces in CM 1:4 including finished surfaces even and smooth without using extra cement complete all as specified and directed.
M&L 15mm thick rendering in CM (1:6) on stone masonry surfaces or surfaces other than fair face of brick work as on wall surfaces and finish the surface even and smooth without using extra cement.
M&L 10mm thick rendering on fair faces of brick work or stone masonry or concrete surfaces in CM 1:6 including finished surfaces fair and even complete all as specifed and directed.
M&L 5mm thick rendering in CM 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
Supply only Integral water proofing compound
M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 pigmented stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. (Payment for providing grooves shall be made separately).
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden attens, repair to the edges of panels and finishing the groove complete all as specified and directed.
M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm) mixed with coarse, agreegate sand and cement in the ratio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed.
M&L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in bedding layer of floor or roof padding for levelling purpose finished the surface even and rough complete all as specified and directed.
M&L coloured virified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc with and including 15mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
All as per item No 17.00 above but in skirting over with and including 10mm thick plaster in cement mortar 1:4 including necessary cutting of tiles as required size all as specified and as directed.
M&L coloured non skid ceramic tiles (1st quality) 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc laid over with and including 15mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
All as per item No 16.00 above but in skirting over with and and including 10mm thick plaster in CM 1:4 including necessary cutting of tiles as required size all as specified and as directed.
M&L coloured non skid ceramic tiles (1st quality) 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc., laid over with and including 15mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tilewith and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
All as per item No 21.00 above but on vertical surface with and including 10mm thick rendering in CM (1:4)
M&L glazed ceramic tiles (1st quality) (coloured) 300mm x 200mm x 7mm thick or 350mm x 250mm x 7mm thick on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over with and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
M&L glazed ceramic tiles (1st quality) (coloured) 450mm x 350mm x 7mm or 450x300x7mm thick on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over with and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid, beded and pointed in any mortar including removing the dismantled material complete all as specified and as directed.
M&L 16-18mm thick granite black colour (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, staircase treads and like jointed over with and including 15mm thick screed in CM (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Checking and attending to complaints of water leakage from bib taps, stop cock, pillar taps, flushing cisterns, wash hand basins, urinal, wall mixer/ basin mixer, angle valve, concealed valve, shower rose, health faucet & jet, float valve of any type & size or any other water supply fittings/fixtures incorporated in plumbing works not mentioned here in before used any where in the bldgs which is causing obstruction to water supply in area,& requires plumbing including carrying out minor repair such as replacement of washers, check nuts, tightening of fittings of flushing cistern or any other repair not mentioned herein before etc using petty materials like washers, thread(soot), Teflon tape, M-Seal, screws (any size), nails (any size) or any other material not mentioned here in before to make water supply /plumbing lineS&Fiittings/ fixtures functional and leak proof to the satisfaction of the occupants/users under the jurisdiction of AGE B/R-I Alwar. Note :- i) The rate of above mentioned item incorporates use of any materials & equipment used for completing the complaints on time to the satisfaction users/occupants (ii) Contractor or his authorised representative shall collect such type of complaints mentioned here in above from B/R-I complaint cell at 8.30 AM on daily basis except Sunday & Holiday & submit the completion of complaints on the next day duly signed by the users/occupants. No extra payment shall be made on account of collection of complaint and submission of complaints. (iii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor. (iv) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.That complaint should also be completed within 24 Hrs without fail.
Checking and attending to carpenter complaints from all joinery works/cup boards etc including petty repairing wk with materials like nails/screws/beads/oil putty as per site requirement. Note: (i) Contractor or his authorised representative collect such type of complaints from B/R-I complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.
Deployment of manpower with material as on requirement basis for carriying out different type of Masonry work such as plaster work (upto 5.0 sqm at one place), repair/replacement of broken tiles fixed in any position (upto 2.0 sqm at one place), repair of brick work (upto 0.5 cum at one place), repair of PCC/hard stand (upto 0.25 cum at one place), repair of manholes, valve pits, pointing of roofs, repair to jambs of doors, windows, coping and benching of chajjas etc, of various Md Accn & OTM Accn under the AOR of AGE B/R (I) to entire satisfaction of Engineer-in-Charge and as directed. Note:- 1. All the bldg materials which are required to carry out necessary repair work(s), cost of transportation / handling of bldg materials and the labour element is deemed to be inclusive in quoted rates. No claim(s) by contractor in this effect will entertaind at any stage. 2. All the repair wks receive/ assigned on a perticuler day will be addressed and completed on that particular day only (upto 1800 hrs) or any stipulated time given by the Engineer-in-Charge otherwise recovery shall be made double the market rate to the contractor.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed.
Taking down Chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and directed.
S&F mild steel framed work such as grills, gratings etc using angle iron ,flat iron, round bars with end of bars shouldered and or rivetted or forged into spikes, framed guard bars barred into iron doors, walkways railing frame work and similler work confiming to Fe 290, grade E-165 all as specified and directed.
S&F 35mm thick, factory made panelled door shutter (two panel), plain, framed with 2nd class hard wood lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS-1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.
S&F 35mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed.
S&F steel windows box type with side hung shutters including projecting type hinges with steel handle 150mm, and steel peg stay, complete with glazing bars, dovetailed or welded & factory made (XW2)M/F) double shutter, openable shutter with glazing bars and other openable shutter without glazing bars, fabricated with members of standard size as shown on drawings including frames complete all as specified. Note :- The quoted rates shall be deemed of lugs and FI required for fixing wire cloth, sheet glass, grills, iron mongry and guard bars as shown on drg.
S&F solid PVC door frame of size 50mm x 47mm made out of 10mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast complete all as specified and directed. (SS Butt Hings shall be paid seperately supply only)
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F stainless steel butt hinges, 100mm medium weight and fixed all as directed.
S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia, 300mm long, with and including a minimum of 6 bolts and nut, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F door spring with 300mm mild steel rat tail rod pattern of standard quality including roller and roller plate complete helical spring) complete all as specified and directed.
M&L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed.
M&L preparing new surfaces plastered or unplastered on walls etc & applying two coats of distemper oil emulsion over a layer of chalk whiting preparatory to distempering complete all as specified & directed.
M&L preparing new surfaces plastered or unplastered on walls etc & applying two coats of cement base paint over primer with alkali resistant primering paint complete all as specified & directed.
M&L preparing plastered or unplastered new surfaces of ceiling & applying three coats white wash complete all as specified & directed.
M&L complete removal of existing treatment & preparation of old surfaces by washing rubbing down and stopping of plastered surfaces and applying two coats of cement based paint white or tined on walls including over a one coat of alkali-resistant priming paint complete all as specified and directed.
M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil greasy spots etc on old decorated surfaces of wall and applying two coats of acrylic emulsion paint (exterior grade) of approved shade/tint over a coat of primer over and including 1mm thick Birla white wall care putty complete all as specified and as directed.
M&L prepration of new surfaces and applying two coats of acrylic emulsion paint of approved shade /tint over a coat of primer and including 1mm thick Birla white wall care putty complete all as specified and as directed.
M&L prepararing surfaces plastered or unplastered old surfaces of ceilings and applying one coat of white wash complete all as specified & directed.
M&L preparation of old wall surfaces by washing rubbing down and stopping of distempered surfaces and applying one coat of distemper oil emulsion white or tined on walls including cornices etc complete all as specified and directed.
Disconnecting & dewatering of PVC overhead tanks scrubbing the inner surfaces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refiing in position after cleaning for tank capacity exc 500 ltr and not exc 1000 ltrs capacity. each including marking the date of cleaning with white paint and stencil all as required & directed. Note: (i) Cleaning shall be done through wash out pipe by marking suitable arrangement to the outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where the wash out pipe are not existing. The dirt etc shall not be allowed to enter the water supply system. (ii) Completion of complaints shall be carried out within stipulated time period to the satisfaction of Engr-in-Charge & users/occupants. (iii)The quoted rates are include items incorporates use of any material for completing the complaints to the satisfaction of user/occupants.
S&F in repair 15mm bore, GI socket, hex nipple, GI nipple 75mm, Nipple 100mm, nipple 150mm, GI tee, GI elbow, GI reducer (15mm x 20mm), (GI reducer (15mm x 25mm) all as specified and as directed.
S&F in repair 15mm bore, GI union, GI tank nipple all as specified and as directed.
S&F in repair 20mm bore, GI socket, hex nipple, GI nipple 75mm, nipple 100mm, nipple 150mm, GI tee, GI Elbow, GI reducer (15mm x 20mm), GI reducer (15mm x 25mm) all as specified and as directed.
S&F in repair 20mm bore GI union, GI tank nipple all as specified and as directed.
Hacking out old broken glass of any thickness/size & any description from wooden or steel frame fixed with clips/putty/wooden beading and S&F with 3mm thick ordinary sheet glass fixed with clips and oil putty/wooden beading completed in squares not exc 0.50 Sqm each pane all as specified and as directed.
All as per item No 57.00 above but 3mm thick figured glass, pin head type.
Hacking out old broken glass from metal/aluminium frame incl punching or drilling out old glazing pins/ springs /clips/ beading and providing & fixing new of any thickness/size of any description and S&F for 5.5 mm thick Sheet glass, ordinary quality and glazing in square exc 0.5 sqm in each pane complete all as specified.
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed tinned tacks or GI wire stampe or nails and screws/ wooden beading complete all as specified & directed.
S&F in repair 18/19mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified & directed.
S&F in repair MS drapery rod 19/20 mm dia fancy type with PVC coloured sleeves fixed with suitable brackets two Nos & PVC colour bowl two Nos at end for door / window compleete all as directed.
S&F in repair SS Curtain rod 19/20mm dia as including suitable fancy type brackets fixed wity rawl plug, screw etc complete all as specified.
S&F in repair door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked) all as specified & as directed.
S&F in repair brass mortice lock, vertical type, size 65mm, 2 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.
S&F in repair MS helical door spring 300 mm size with roller & roller plate fixed to wooden or steel frames with Screws/welding as required at site complete all as specified.
S&F in repair 300mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed all as specified and as directed.
S&F in repair extruded aluminium alloy handle, fabricated type, anodised, 125mm size, (ISI marked) complete all as specified.
S&F in repair 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified
S&F in repair butt hinges 100 mm long medium weight cold rolled MS fixed in repairs to wooden or pressed steel/angle iron frames by welding all as specified.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed overall length 140 mm all as specified & directed.
S&F in repair MS steel window stay 300 mm long for steel windows all as specified and directed.
S&F in repair handles for steel windows all as specified and directed.
M&L welding in repair not exceeding 6mm thick and not exceeding 2.5cm in length all as specified and directed.
Taking down shutter of any description not exc 1 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.
S&F 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as directed.
S&F 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.
M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete all as directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position with ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight 210 gms all as specified in SSR Part I with and including dismantling existing water tanks complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position with ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight 210 gms all as specified in SSR Part I with and including dismantling existing water tanks complete all as specified and directed.
S&F in repair ball valves of 20mm dia, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed, minimum weight - 210 gms of including taking down existing ball valves any type all as directed.
S&F in repair vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified.
S&F in repairs vitreous china squatting pan 'orissa pattern' size 580mm x 450mm white with integral foot rest (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed.
S&F in repair vitreous china wash basin white of size 550mm x 400mm with padestal stand (ISI marked) including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
S&F in repair Jet spray PVC butterfly plated for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.
S&F in repair health faucet chromium plated suitable for 15 mm bore pipe including 1M long PVC tubes for EWC complete all as specified & directed.
S&F in repair PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified.
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as directed.
S&F in repair PVC internal fittings (kit) complete for low level flushing cistern tank, all as specified and directed.
S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed.
S&F in repair CP toilet paper holder with cover complete all as specified and directed.
S&F in repair waste coupling 32mm of PTMT (half or full threaded) (minimum wt 45 gms) complete all as specified & directed.
S&F in repair plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified an directed.
S&F in repair of brass spindles, phases of brass of any size required 3/4/5 & long size for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed.
S&F in repair MS grating CP 75/100mm dia, without hole and with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.
S&F in repair 15mm bore pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed.
S&F in repair Brass chromium plated shower rose with long arm 150mm size fixed to 15mm bore pipe all as directed.
S&F in repair sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mm x 460mm with bowl size 410mm x 330mm x 160mm incl 32mm PVC flexible waste pipe complete all as directed.
S&F in repairs waste coupling for sink as per sample approved complete all as directed.
S&F in repair mirror cabinet (PTMT) fixed on wall with cadmium plated brass screws as per approved by GE all as directed.
S&F in repair bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair for bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe (Min. wt 90 gms) and complete all as specified and directed.
S&F in repair 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.
S&F in repair 15mm bore, two way angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.
S&F in reapir 15mm bore, stop valve external threaded, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.
S&F in repair 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair PVC flexible waste pipe 32/40 mm dia & approx 900mm long with PVC waste coupling suitable for WHB, sink & urinal complete all as specified & directed.
S&F in repair brass CP Wall mixer for mixing hot & cold water suitable for 15mm bore dia pipe screwed down for iron pipe and fixed copmplete all as specified and directed.
Dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia all as specified and as directed.
S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with MS clamps as per site requirement complete all as directed.
S&F PVC(SWR) vent cowl 75mm dia complete all as directed.
S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as directed.
All as per item No 116.00 here in before but fixed to walls with clamps complete all as directed.
S&F PVC (SWR) bends 75mm dia any radius complete all as directed.
S&F PVC (SWR) 75mm dia floor trap, plain with grating including jointing with solvent cement all as directed.
Treatment for sunken portion as per undermentioned course of action :- (a) Demolition of lean concrete and other type of filling in sunken portion & clean the sunken portion incl vertical wall surface complete as directed. (b) Maintain the Sunken to a slope of 1:40 outward with 32mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (c) Top of the sunken floor slabs shall be laid to a slope 1:40. The surface of RCC slab shall be made even and smooth by using extra cement while the concrete is still green. Concave fillet in PCC (1:2:4) type B0 of radius 75 mm shall be provided at the junctions of RCC slab and adjoining walls. (d) M&L .Floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight of cement. Over plastered surfaces, M&L for applying evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces a layer of APP based polymeric membrane not less than 3mm thick, weighing not less than 3 kg per sqm, reinforced with polyster non- woven fabric (weighing not less than 150 gm per square metre) shall be laid by torch application. Side overlaps shall be 100mm and the ends laps shall be 150 mm and overlap joints shall also be sealed by torch application. (e) The sunken portion shall be filled with lean cement concrete (1:5:10), type E2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes / joints and slabs / walls by filling water for 72 hours. The sunken portion of Nahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks. (f) 32 mm dia GI spout shall be provided to drain out leakage, if any.
M&L 75mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection course surfaces finished even and smooth without using extra cement complete all as specified and directed.
Excavating in post holes (or similar) each n. exc 0.5 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm as in soft/loose soil.
M&L cement concrete type C-2, 1:3:6 (using 40mm graded aggregate) in foundation, filling, mass concrete for post holes etc complete all as specified and directed.
Dismantling fencing of wire mesh any type complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling posts,purlins, or any part of truss, struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground or wall complete all as specified and directed.
S&F mild steel joist angle channel or tee sections and fix independently in concrete as fencing posts and similar work confirming to Fe 410 or Fe -310-0 complete all as specified and directed.
S&F mild steel bolt purpose made with hexagonal or square head one end screwed the other end or screwed both ends each screwed to be fuitte3d with washer and one hexagonal or square nuts exceeding 50mm and n exc 75 mm long dia of the shank 16 mm complete all as specified and directed.
Fixing only chain link fencing including line wire any mesh size and type to any type of standards rails, straining bolts etc inlcluding provision of binding wire complete all as specified and directed.
Supply only chain link MS galvanised fencing any size or type complete all as specified and directed.
S&F mild steel MS round bar 10 mm dia and over cut to length bent to shape required including cranking bending hooking etc and binding with MS wire 0.9 mm dia (annealed) complete as in straightening bars of fencig all as specified and directed.
S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc with and including taking down old wire complete all as specified and directed.
M&L preparation to new or previously untreated steel surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and directed.
M&L prepration of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint over a coat of zinc chromate primer complete all as specified and directed.
M&L 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.
M&L interlocking tiles 60 mm thick (M-35) having compressive strength not less than 35N/MM2 with grey cement and pigment complete all as specified and directed.
M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L precast kerb stone built in PCC type B1, 1:2:4 (using 20mm graded stone aggregate) and fixing in CM 1:4 complete all as specified and directed.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L screed laid 15mm thick in CM 1:4 with water proofing compound over green concrete surface (WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified and directed.
Preparation of roof top surfaces, providing and applying UV stable single component smart care damp proof ultra is a fibre reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibres and having SRI of 106 on top of concrete roof surface in three coats including self primer at ratio pf damp proof and water 3:1 and coverage @ 1 Ltr /10 sqm with a thickness of 650 micron. Note : 6 Hrs interval between two coats will be maintain& the work will be carried out through company applcator duly got approved from Accepting officer in writing before incorporation and paid only after receiving of the warrenty certificate from the company. Make : Asian paint or equivalent as approved by GE. Note : The treatment shall be carried out by authorised applicator approved by GE as per the manufacturer instructions.
M&L PCC 1:3:6 type C2 (using 20mm graded stone aggregate) as in surface channel/drains etc complete all as specified and directed.
Extra for forming fair finished drain or channel exc 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc.
M&L road marking (mechanically)with hot applied thermoplastic compound with reflectors glass beads on bituminous surface(providing and laying of hot applied thermoplastic compound 2.5mm thick including reflector glass beads @ 250 gms per sqm area) the finished surface shall be level uniform and free from streaks and holes conforming as per IS:164 grade-I or also available as per manufacturer instructions Makeb : Asian Paints/ Shalimar paintd/Berger as approved by GE.
M&L providing cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) as in copings and the likes complete all as specified and directed.
M/s S Amarjit Singh
J.J.ENGINEERING
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .