REPAIR AND MAINT OF STREET LIGHTS AND CONNECTED ITEM UNDER ZONE-1 AND ZONE-II AREA UNDER GE (S) JAIPUR

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation for laying cable, pole, stay assly etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in and including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified and directed.

Removal excavation to a distance n.exc 50m and depositing where directed at a level not more than 1.5m above the starting point complete all as specified and directed.

M&L for sand filling in trenches around underground cable to provide cable cushion with tibba sand including gently punning complete all as specified & directed. Note- Punned thickness of sand shall be measured and paid for sand used in cushioning.

M & L Bricks for protection cover to under ground cable (with old size sub class ‘B’ bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10mm complete all as specified and directed.

Supply, laying, testing and commissioning LT cable size 16 Sq mm, 4 core of 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminium stranded conductor LT UG Cables (conforming to IS 1554) in trenches/ducts/ through RCC pipes under roads including taking out old unserviceable LT cable, complete all as specified and directed.

M&L earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron or steel earth strip 25mm x 4 mm by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing strip shall be protected by galvanised iron or steel pipe 32mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & tested complete. NOTE:- (i) The concrete pit shall be made in PCC 1:2:4 type B-O, using 12.50 mm graded stone aggregate and 40mm thick precast cover slab of RCC (1:2:4), type B-1, using 20mm graded stone aggregate with suitable MS handle. Reinforcement in cover shall be of 8mm dia TMT bars laid @150mm c/c both ways. (ii) Quoted shall include the cost of 7.5 metre GI pipe for protection of earth strip (iii) Quoted shall include cost of 7.5 metre earth strip (iv) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides.

Supply and fix 1.5 Sqmm 3 core cable, PVC insulated and PVC round sheathed, copper conductor(flexible) industrial cable, 1100 volt, confirming to IS :694 including replacement of old unsv cable complete all as specified and directed. Note- (i) Cable is reqd to be connected from street light to junction box with proper lugs. (ii) T&P required for repair/maintenance such as ladder, Crane vehicle, menpower etc, are inclusive in the item rate.

Supply and fixing street light fitting LED type of capacity 90 Watt with PDC aluminium body and toughened glass visor fitted in frame, secondary optical lens for superior light distribution, Efficacy>= 110 Lm/W, 5700K, driver efficiency>= 85%,Power factor>=0.95 IP66 protected to be fixed in existing bracket at existing poles/bldgs complete all as specified and directed. (Note :- (i) T&P such as ladder, Crane vehicle, menpower etc, are inclusive in the quoted rate. (ii)Rate of necessary arrangement for fixing LED light on existing bracket like reducer or extension of pipe by suitable size of GI pipe as per dia of LED light by welding etc are inclusive in the quoted rate.)

Supply and fixing street light fitting LED type of capacity 60 Watt with PDC aluminium body and toughened glass visor fitted in frame, secondary optical lens for superior light distribution, Efficacy>= 110 Lm/W, 5700K, driver efficiency>= 85%,Power factor>=0.95 IP66 protected to be fixed in existing bracket at extg poles/bldgs complete all as specified and directed. (Note :- (i) T&P such as ladder, Crane vehicle, menpower etc, required are inclusive in the quoted rate. (ii)Rate of necessary arrangement for fixing LED light on existing bracket like reducer or extension of pipe by suitable size of GI pipe as per dia of LED light by welding etc are inclusive in the quoted rate.)

S& F in replacement cable junction box of size 260mmx210mmx116mm for outdoor installation IP-65 protected made of poly carbonate with necessary clamps (2 Nos) for mounting on poles, comprising with copper bus bar for 3 phases and neutral of required amps capacity for cable size 16/35 sqmm 4 core, phase and neutral fixed on porcelain insulator and MCB, SP 0.5 to 6 amps, 10 KA - 01 Nos complete including taking down old unsv junction box complete all as specified and directed.

Disconnecting old existing non functional street light fitting/flood light fitting of any size/type complete from poles/High Mast/Bldgs and dismantling the same for necessary repair or replacement of U/S spares complete and refixing after repair connecting and testing complete all as specified and directed. Note :- (i) T&P required for above work such as ladder, Crane vehicle, menpower etc, are inclusive in the quoted rate. (ii) Accessories/ spare parts shall be measured & paid separately under respective item No 14.00 to 17.00 as supply only. (iii) Rate of necessary arrangement for fixing LED light on existing bracket like reducer or extension of pipe by suitable size of GI pipe as per dia of LED light by welding etc are inclusive in the item rate.

Supply only of LED Driver with surge protector for 45 to 60 watt LED light complete all as specified and directed. Note :- Driver & Surge protector shall be of same make or Suitable for LED fitting as available at site

Supply only of LED Driver with surge protector for 90 to 150 watt LED light complete all as specified and directed. Note :- Driver& Surge protector shall be of same make or Suitable for LED fitting as available at site

Supply only of Contactors 4 pole 63 Amp complete all as specified and directed.

Supply only of Time switch Electronic digital type complete all as specified and directed.

Supply and fix in repairs MCB’s single pole with neutral, 6 Amps,10KA, 250 volts with ‘C’ curve, fixed in existing PVC box including connecting complete all as specified and directed.

Supply and fixing in replacement of New Generation Energy Saving 150 watts LED flood light with lens optics on LEDs. powder coated PDC aluminium body with toughened glass visior lumen Efficacy >105Lm/w. Surge protection up to 10 KV Pf >.95, temp 5700K to 6500K ,IP 66 complete all as specified and directed.

Supply and fixing in replacement of 100 watts LED flood light with lens optics on LEDs, IP66 protected luminaire fixture made from pressure dia cast aluminium housing & heat resistance toughened glass cover, Pf >.95 lumen Efficacy >105 Lm/W as directed by engineer-in-charge

Supply and fixing in replacement of 80 watts LED flood light with lens optics on LEDs, IP66 protected luminaire fixture made from pressure dia cast aluminium housing surge protection of 10 KV & heat resistance toughened glass cover Pf > .95 Lumin Efficacy lm/W >100 complete all as specified and directed

M&L for Disconnecting and Taking down U/S High mast light SWR (Steel Wire Rope) and S&F Steel wire rope dia 6 mm shall be fabricated 'Marine Grade"-AISI Stainless Steel 316 of 7/19 of New SWR from Bottom to Top of the pole including clamps nut bolts washers and other connected accessories connecting and testing complete all as specified and directed.

M&L for Disconnecting and Taking down U/S High mast light Copper Power Cables, XLPE LT Copper Conductor Cable 4 Sq. mm,4 core Stranded Copper conductor, XLPE Insulated, PVC Innersheathed, Extruded PVC Type ST2 Outer Sheathed, 1100 V Grade as per IS 7098 connected accessories connecting and testing the complete all as specified and directed.

Supply and laying of GI pipe size 50 mm dia medium grade fixed on poles, walls and ceiling etc. with all fittings for protection of cable in repairs including clamps for fixing of GI pipe complete all as specified and directed.

Supply and fixing PVC conduit Pipe of 20 mm dia Heavy grade fix with 2 x FI clamps, size of FI 25mm x 3 mm including nut & bolts and washers of suitable size fixing on poles etc. with all fittings complete all as per specified.

Labour for boring under road/drain by manual/machine method for inserting GI tubing up to 80 mm dia for cable protection complete all as specified and directed by EIC.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat stranded conductor of size 6 sq. mm 2 core including taking down old U/S cable complete all as specified and directed.

Supply, fixing & install Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified for type 410 SP-31, 9.0 metres long complete all as specified. Note- (a) The portion above coping shall be painted in alternative bands of black & white colour starting with white colour (each band of 30 cm wide) by two coat of synthetic enamelled paint upto 1.5 m height . (b) PCC for foundation and coping shall measured and paid separately.

M & L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate for foundation of stay assembly / struts / poles etc.

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping for street light poles including form work complete all as specified and directed.

Supply and fixing GI pipe bracket 40mm dia medium grade, size 1.5 meter long, single swan neck shape suitable to fix on top of tubular pole complete with nuts, bolts and washers etc complete, including two coats of aluminium paint/ white synthetic enamel paint complete all as specified and directed.

Supply and fixing of GI pipe bracket 40 mm dia, medium grade, 1.50 meter long and bend in 120 degree angle for mounting on street light pole of suitable size including 2 x FI clamp, nut & bolts and washers of suitable size complete all as specified.

Material & Labour for preparation of old painted surface of Steel tubular pole 9/11 metre height of street light, applying two coat of aluminium paint including making strip of 30 cm width (Red and white in alternate band) with two coat of synthetic enamel paint on pole upto 1500 mm height from coping and rewriting pole No by painter with enamel paint complete all as specified and directed by Engr-in-Charge

Supply and fixing in replacement light fitting 120 W LED flood light with lens optics on LEDs, IP66 protected luminaire fixture made from pressure dia cast aluminum housing & heat resistance toughned glass cover, Pf >.95 lumin Efficacy >105 Lm/W as directed by Engineer-in-charge

Labour only for repair of U/S time switch assymbly by replacing spares including reconnecting and testing complete Note : - Accessories/ spare parts shall be measured & paid separately as supply only under respective items of Sch `A`

Supply only Contactors 3 pole 40 Amp complete all as specified and directed.

Supply only Time switch Electronic digital type complete all as specified and directed.

Supply and fixing in replacement of PVC sheathed multi stranded copper conductor cable of size 2.5 sqmm 3 core complete all as specified and directed.

Supply only of LED Driver withsurge protector for 70 to 80 watt LED light complete all as specified and directed by Engr-in-charge. Note :- Driver& Surge proctector shall be of same make or Suitable for LED fitting as available at site

S & F in replacement of thermoplastic, polystyrene unbreakable junction box size 300 x 200 x105 mm suitable for pole mounted outdoor type IP 65 insulated complete with FI clamps of suitable size & nuts, bolts, washers and including terminal block heavy duty with phase seperators between R, Y, B terminals, one MCB SP 6 amp 10 KA, all duly fixed on din channel, cable glands for cable entry complete all as specified and directed.

Taking out existing cable LT any size and type, not more than 20 Meter length from the loop/ trench and relaying the same after dressing of cable including replacement of aluminium lugs, nuts etc complete including necessary excavation & earth work complete all as specified and directed

Supply and fixing in replacement U/S High mast light Motor three phase 415 Volts 50Hz of 2 HP capacity, 1500 rpm suitable to high mast as per existing technical specification cast iron body induction motor complete all as specied and directed.

Supply & fixing or laying galvanised steel tubing light grade of 40mm bore (ISI marked) for protection of under ground cable on poles / walls under road crossing etc including taking down existing pipe.

M&L earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron wire 4.0 mm by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing wire shall be protected by galvanised iron or steel pipe 15mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & directed.

M&L cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate for pedestal of poles including necessary formwork, complete all as specified and directed.

SHREE BHAGWATI ENTERPRISES (BID ID -3123760)

LAKSHMI ASSOCIATES (BID ID -3133034)

ANKIT BUILDERS (BID ID -3132044)