864/WS-08/2020-21

Amount

Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing complete all as specified and directed.

Material and labour for point wiring complete with PVC insulated and unsheathed, copper conductor cable Multistrand FRLS single core 1100 volt grade electric cable of 1.5 sqmm (nominal area) in and including concealed rigid PVC conduit/Casing Caping of suitable size as per site requirement including 1.50 sqmm PVC insulated & unsheathed copper cable as continuous earth wire with all accessories including lugs required, complete all as specified and directed for the following for One light point or one fan point controlled by one switch SP 230 Volts Make of Wire : Havells/KEI/HPL Note :- Modular white cover plate with frame and metal flush box will be measured and paid under respective items :- Make of Wire : Havells/KEI/HPL

All as per Srl item No 2 above but for One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board. Make of Wire : Havells/KEI/HPL

All as per Srl item No 2 above but for One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board. Make of Wire : Havells/KEI/HPL

All as per Srl item No 2 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed. Note :- Modular white cover plate with frame and metal flush box will be measured and paid under respective items. Make of Wire : Havells/KEI/HPL

All as per srl item No 2 above but using 4 sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed. Note :- Modular white cover plate with frame and metal flush box will be measured and paid under respective items :- Make of Wire : Havells/KEI/HPL

Supply and fixing Bell electric ding dong AC 230 V single pole complete all as specified and directed. Make : Anchor/Cona/Standard

Supply and fixing Modular Bell push 6A,1way, 1module, complete all as specified and directed. Make Anchor Roma/Legrand Aretor/Crabtree

Supply and fixing Modular Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed. Make Anchor Roma/Legrand Aretor/Crabtree

Supply and fixing switch modular 6 Amps 230 Volts one way switch. Make Anchor Roma/Legrand Aretor/Crabtree

Supply and fixing Switch modular type AC 230 volts 16/20 Amps one way complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

Socket modular 6A/16 Amps-2/3 pin combined AC 230 Volts 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

Supply and fixing Lamp holder insulated body PVC/polycarbonate with back plate suitable for batten fitting complete all as specified and directed. Make Anchor/Cona/Standard

Supply and fixing Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed. Make Anchor/Cona/Standard

Supply and fixing Modular white cover plate with frame 2 module and metal flush box 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

Supply and fixing Modular white cover plate with frame 3 module and metal flush box 3 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

Supply and fixing Modular white cover plate with frame 4 module and metal flush box 4 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

Supply and fixing Modular white cover plate with frame 6 module and metal flush box 6 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree

Material and labour for Point wiring with 1.5 Sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed), surface type, drawing in and including PVC Casing caping or PVC concealed conduit 19mm dia, having wall thickness not less than 2 mm with sunk cast iron/pressed steel terminal boxes made out of 1.2mm thick sheet inclluding one coat red oxide primer on internal and external surface covered with 3mm thick hylam brand IS-2036 marked laminated sheet cover (for Mounting switches, sockets, regulators etc), including 1.5 Sqmm PVC insulated (multistrand) FRLS copper conductor continious earth wire for One light point or one fan point controlled by one switch SP 230 Volts. Make of Wire : Havells/KEI /HPL

All as per Srl item No 20 above but forOne 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board. Make of Wire : Havells/KEI /HPL

All as per Srl item No 20 above but for One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board. Make of Wire : Havells/KEI /HPL

All as per Srl item No 20 above but for One bell point controlled by one switch. Make of Wire : Havells/KEI /HPL

All as per Srl item No 20 above but using 2.5 sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed) for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed. Make of Wire : Havells/KEI /HPL

Supply and fixing Switch piano, flush type single pole, one way 5 Amp all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

Supply and fixing Switch piano, flush type single pole, one way 15 Amp all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

Supply and fixing Socket outlet 2 in 1, 3 pin 5A complete all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

Supply and fixing Socket outlet 2 in 1, 3 pin 5A and 15 amp flush type complete all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

Supply and fixing stepped type electronic fan regulator flush type complete all as specified and directed by Engr in Charge. Make HPL/Cona/SSK

Material and labour for bell push flush button single pole one way 5 amps 240 volts with polycarbonate body. Make HPL/Cona/SSK

Supply and fixing LED light fitting fixture 20W, decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly energy efficient ready to use complete all as specified. Make-Havells(LHEXBXPNIN1WO20)/Wipro(LL20-221-XXX-65-NE)/HPL(HLPT51820PCGCW)/Philips (BN021CLED20SPSUCDLGR)

Supply and fixing Recess mounted LED luminaire with complete diffuser 36W , 2'x2', Flat Panel Ultra Slim powder coated CRCA housing, heat sink complete all as specified and directed. Make-Wipro(CRCO10R038HP57GL)/Philips (RC380BLED34S-6500G3PSDOD) /CG(LCPL-36-CDL(2X2))

Supply and fixing Round/Square surface mounted slim panel LED downlighter with complete diffuser 18W complete all as specified. Make-Wipro(LD81-171-XXX-60-SM)/CG(LCDSPLN-R/S-18-CDL)/Havells(LHEAAVP7IL1W018)

Supply and fixing LED Mirror light fitting 1 x10 W 6500K decorative ultra slim linear LED lighting fixture with extruded AL. heat sink, environmental friendly, energy efficient, complete all as specified and directed. Make - Wipro Cat Part No LL20-111-XXX-65-NE or equivalent in Philips/Havells

Supply and fixing 10 Watt 6000K LED Bulk head luminaries with opal diffuser, etc complete with accessories all as specified and directed. Make - HPL (HLPLEDBH10W(CW))/ Havells/HPL/CG)

Supply and fixing LED 10 W (candle /ball type) with B-22 base, complete all as specified and directed. Make -Havells/Philips/Halonix

Supply and fixing distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link confirming to cat pt No 607913 of Legrand or equivalent of make Indoasian/Standardr complete with one MCCB 3 pole 415 Volts 100 Amps rating with rupturing cap 16 KA and 12 Nos of MCB SP 63 Amps of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed (Outgoing MCB will be measured separately).

Supply and fixing Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 12 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed. Make Indoasian/L&T/HPL

Supply and fixing Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 8 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed. Make Indoasian/L&T/HPL

Supply and fixing Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 4 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed. Make Indoasian/L&T/HPL

Supply and fixing MCB SPN 40 amp, 240 V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity complete all as specified and directed. Make Indoasian/L&T/HPL

Supply and fixing MCB SPN 63 amp, 240 V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity complete all as specified and directed. Make Indoasian/L&T/HPL

Supply and fixing single pole MCB 6 TO 32 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘c’ curve, 10 KA breaking capacity complete all as specified and directed. Make Indoasian/L&T/HPL

Supply and fix SP MCB 63 Amps current carrying capacity Made from moulded self-extinguishing thermostat plastic and suitable for ‘c’ curve complete all as specified and directed. Make Indoasian/L&T/HPL

Material and labour for submain wiring with two single core PVC insulated flexible copper conductor cable of sze 2x4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in and including PVC conduit/casing and capping and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge. Make of Wire : HPL/Havells/KEI

Material and labour for submain wiring with two single core PVC insulated flexible copper conductor cable of sze 2x 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in and including PVC conduit/casing and capping and making good the disturbed wall surfaces to match with existing complete all as specified and directed. Make of Wire : HPL/Havells/KEI

Material and labour in replacement of 10 Sqmm 1100volts grade heavy duty PVC insulated multistranded aluminium conductor and overall PVC sheathed in service connection suspended by insulated hangers not more than 1m apart incl 4mm suspension GI wire one twin core cable flate and porcelain insulators etc. Make: Paragon/PLAZA/Havells/KEI/HPL

Material and labour in replacement of 6 Sqmm 1100volts grade heavy duty PVC insulated multistranded aluminium conductor and overall PVC sheathed in service connection suspended by insulated hangers not more than 1m apart incl 4mm suspension GI wire one twin core cable flate porcelain insulators etc Make: Paragon/PLAZA/Havells/KEI/HPL

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of cables, foundation of pole,stay etc and getting out in soft/loose soil complete all as specified and directed. (cable shall be laid 60 cm below ground level)

All as per Srl item No. 49 above but exceeding 1.5 mtr and not exceeding 3 mtr in depth complete all as specified and as directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable Complete all as specified and directed.

Material and labour for old size brick well burnt, laid flat ,for cable protection complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed . Make – Ravindra, Oswal, Kinjal.

Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 10 Sqmm x 2 Core complete all as specified and directed.

Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 16 Sqmm x 2 Core complete all as specified and directed.

Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 25 Sqmm x 3.5 Core complete all as specified and directed.

Material and labour for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

Supply and laying Cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 volts grade with stranded alumnium conductor of size 10 Sqmm 4 core complete.

Supply and laying Cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 volts grade with stranded alumnium conductor of size 16 Sqmm 4 core complete.

Supply and laying in trenches or fixing on pole / wall tube light grade galvanised ISI Marked with all fittings of size 40mm dia by means os MS clams, nut, bolts and washers of suitable size complete all as specified and as directed.

Supply, fixing / errecting in truly vertically position steel tubular swaged welded pole complete with cast iron base plate, finial taper plug, bolts, nuts, and screws as specified type 410 SP - 31 (9 mtr long) including one primer coat, one under coat, one finishing coat of aluminium paint, marking of pole numbers and making 3 Nos of black colour strip 30 cm wide on equal distance from coping complete all as specified and as directed. Note : Earth work and PCC will be measured and paid separatly.

Material and labour for PCC (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for PCC (1:3:6) type C2, using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1, using 20 mm graded stone aggregate as in roof kerbs / coping / bed plate and the like including weathering slightly or chamfered angle with necessary form work complete all as specified and directed.

Material and labour for earthing complete with galvanized iron earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to GI strips 25 x 5 mm by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways including adiquate quantity of charcoal dust and comman salt in layers all as shown in electrical plate No. 3 of SSR Part-I (2009) all as specified and directed.

Supply and fixing FRP looping boxe with PVC sheet finish inside including MCB SP - 01 No., heavy duty PVC connector four way terminal strip - 01 No. and fixed on pole with MS clamps made out from MS flat 40 x 4mm with nut bolts and washers complete all as specified and directed. Make : Sintex or equivelent approved.

Supply and fixing Timeline distribution board of 32 Amps 3 pole, having digital time switch 230 volts, complete all as specified and directed. Make : Indoasian (Cat No. TL032DBO) or equivelent approved.

Material and labour for street light bracket made out of 40mm dia GI pipe light grade ISI marked not less than 1.20 metre long made to shape at 45* angle or as directed including fixed on pole with MS clamp made out of MS flat 40 x 3mm with nut, bolts and washer of suitable size complete all as specified and as directed.

Supply and fixing on pole / wall 70/72 watt security / street light luminaire environment friendly long life versatile die cast aluminium, suitable for and including 70/72 watt LED road way luminaire with high power LED as light source and HF electronic driver, confirming to IP 66 and connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells Cat part No. LHETBXU7PA7BO70 or equivalent in Philips / Surya / Bajaj.

S&F in replacement Air termination rod, single pointed aluminum rod 12 mm dia and 300 mm long including fixing with MS clamp complete all as specified and directed.

S&F in replacement GI Tubing 80 mm dia, medium grade with all fittings including fixing arrangement with screws, clamps complete all as specified and directed.

S&F in replacement GI Tubing 50 mm dia, medium grade with all fittings including fixing arrangement with screws, clamps complete all as specified and directed.

S&F in replacement Aluminum Strip 25 x 3.15 mm with saddles and fixing screws etc for roof conductors and down conductors above ground complete all as specified and directed.

Material and labour in replacement for test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm , drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw complete all as specified and directed.

Material and labour for PCC Block 1x 1x2 Ft by using 20 mm graded aggregate for fixing of GI pipe 50 mm bore complete all as specified and directed.

Material and labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire of 4 mmas earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe light grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete all as specified and as directed by Engineer-in-charge.

Supply, fixing, installing and testing Servo voltage stabilizer fully automatic micro processor based control card of capacity 400 KVA, three phase oil cooled with Single phase prevention system, outdoor type and designed for input variation between 190 V to 450 V with output voltage stabilizer at 415 volt with accuracy of + 1% and speed of correction 32 to 60 V/Sec, input frequency 47 o 53 Hz, auto / manual operation, no load loss less than 0.5%, operating temp - 15C to 45C above ambient and unbalanced load complete with first filling of oil complete, all as specified and as directed including additional features as follows:- (a) High & low voltage cutoff system. (b) Change over switch to by-pass the system. (c) Construction of shed for servo voltage stablizer including steps, plinth protection, cable duct complete all as specified and shown on drawing No CESZ/1110/2011 sheet 1/2 and 2/2 dated 01/12/2011.

Supply laying and testing cable XLPE insulated screened ,galvanised steel strip or wire armoured,electric power cables(heavy duty)with stranded aluminum conductor,1100 V grade of size 300 sqmm x 3.5 core complete all as specified and directed.

Earthing complete with copper earth plate electrode 60cm x 60 cm x 3 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level, connecting to the copper earth strip 25 x 3 mm size by means of bolts,nuts,check nuts and washers of galvanised iron and 25 x 3 mm earth lead protected by provision of GI light grade pipe 40 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 10mm thick CI cover hinged to angle iron frame of size 25x25x6mm with lugs 02 and with 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling in alternate layers and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr all as per electrical plate No. 3 of SSR part I and connecting to earth test point all as specified or indicated including testing on completion.

M/S NEW FAROOQ TRADERS

M/S Mohammad Saleem and Co

M/S ZENITH TRADE LINK

M/S ASHRAF CONSTRUCTIONS

M/S MARVEL ELECTRICALS

ORISON ENTERPRISES

M/S Khan Hussain & Co.