REPAIR/REPLACEMENT TO SANITARY AND PLUMBING FITTING, REPAIR TO PLASTER GRIT WASH PLASTER AND SEEPAGE IN MD ACCN (MAP QTRS AT ZONE -IV AREA ) UNDER AGE B/R-IV OF GE SOUTH MEERUT CANTT

Amount

Supply and fixing in repair 15mm bore GI water tubing ,galvanised, Medium grade, with all fittings fix to wall , ceilings or laid in floor complete all as specified and directed Make-TATA/Jindal/Swastik

Supply and fixing in repair 20mm bore G I water tubing Medium grade,gavanised with all fittings fix to wall,ceilings or laid in floor complete all as specified and directed Make- TATA/Jindal/Swastik

Supply and fix in repair pillar taps, fancy type ,15mm dia cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair fancy type long body bib taps, cast copper alloy ,chromium plated ,long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

Supply and fix in repair wall mixer cast copper alloy ,chromium plated for mixing hot and cold water , screwed for iron pipe suitable for 15 mm bore pipe with telephonic shower rose and crutch ( provn for holding hand shower ) complete all as specified and directed.

Supply and fix in repair kitchen sink mixer with swinging casted spout , cast copper alloy ,chromium plated for mixing hot and cold water , screwed for iron pipe suitable for 15 mm bore pipe complete all as specified and directed.

Supply and fix in repair 15 mm dia angle cock, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron or for union including CP flange complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8 type D-2 , minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pedestal pattern white and trap including connection to drain or outgoing pipe and flushing pipe, antisyphonage pipe etc and making good to floor finishes to match the existing complete all as specified and directed.

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity low level, white with inlet, ball valve float,flush pipe and handles including brackets fixing plug and 60mm long brass screws etc complete all as specified and directed

Supply and fixing in repair PVC seat cover suitable for water closet, white flat bottom and fixed with mild steel chromium plated hinging device complete all as specified and directed.

Supply and fix in repair vitreous china, wash hand basin, white, flat back, size 550 x 400 mm including brackets, brass chromium plated waste fitting and PVC waste pipe of 32 mm dia complete all as specified and directed.

Supply & fix in repair CP brass shower rose 75mm dia ,with or with out swivel joint including fixing to steel pipe or union 15mm as specified and directed.

Supply and Fix in repair 20 mm bore, PTMT ball valves, high pressure with polyethylene float and fly nut, including epoxy coated aluminium rod, screwed for iron pipe or for brass ferrule complete all as specified and directed.( Min wt -210 grams )

Supply and Fix in repair CP brass jet spray superior quality with flexible PVC pipe of standard length complete all as specified and directed.Make:- Nova/Plumber/L&K/NMC

Supply and fix in repair chromium plated brass jet health faucet /hand shower including PVC flexible pipe of 1.50m length and holding brackets, screws etc complete all as specified and directed.

Supply & fixing in repair PVC connections of 450mm long suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified & directed.

Supply and Fix in repair PVC waste pipe of 32/40mm bore suitable for WHB/Sink complete all as specified & directed.

Supply and Fix in repair CP brass towel rack 450mm fixed on wall with CP brass screw and rawl plug including making good the surfaces to match the existing complete all as specified and directed.

Supply and Fix in repair Mirror Cabinet of PTMT alloy fixed to rawl plugs with chromium plated brass screws and cup washers including making good the surfaces complete all as specified and directed.

Supply and Fix in repair glass corner shelf as per site of MAP Qtrs fixed with CP brass screws and rawl plug to wall including making good the surfaces complete all as specified and directed.

Supply and Fix hoisted and fixed in position rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity including 20 mm dia PVC float valve of PTMT ( Min wt-210 Gms) , wash out pipe and other fittings and including dismantling existing unsv water storage tank complete all as specified and directed.

Supply and Fix hoisted and fixed in position rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity including 20 mm dia PVC float valve of PTMT ( Min wt-210 Gms) , wash out pipe and other fittings and including dismantling existing unsv water storage tank complete all as specified and directed.

Supply and fixed gun metal globe valves, 15mm dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed gun metal globe valves, 20mm dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and Fix PVC pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc 75mm bore as in waste or rain water pipes including demolition and breaking of old u/s drain pipes complete all as specified and directed.

Supply and Fix PVC pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc 110mm bore as in waste or rain water pipes including demolition and breaking of old u/s drain pipes complte all as specified and directed.

Supply and fix in repair 110mm bore PVC (SWR) bends any radius jointed with cement solvent complete all as specified and directed.

Supply and fix in repair 75mm bore PVC (SWR) bends any radius jointed with cement solvent complete all as specified and directed.

Supply and fix in repair PVC floor trap, 75 mm dia with SS grating including jointing to waste pipe in cement mortar complete all as specified and directed.

Supply and fix mild steel CP grating 100/125mm dia incl waste hole where reuired at site complete all as specified and directed.

Supply and fix in repair 15 mm bore concealed stop cock, cast copper alloy, chromium plated , fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron and with CP brass flange complete all as specified and directed.

Material & labour for 14-16mm thick pre polished green marble stone (Udaipur Green) as on cooking platform, steps, tread and similar works, laid & jointed with cement slurry mixed with pigment to match the shade of the slab laid over and including 15 mm thick cement screed bed in CM 1:4 including rounding/ rubbing and polishing of the edges and roughening the existing surfaces complete all as specified & directed.

Material and labour for preparation of old decorated plastered or unplastered surfaces of wall and applying one coat of white wash all as specified and directed.

Material and labour for preparation of old decorated plastered or unplastered surfaces of ceiling and applying one coat of white wash all as specified and directed.

Material and labour for preparation of old painted wall surfaces & applyng two coats of cement base paint of approved colour complete all as specified and directed .

Material and labour for complete removal of finishes from wall surfaces and applyng two coats of oil bound distemper over a coat of wall care putty ( JK/Birla) complete all as specified and directed .

Material and labour for preparation of old distempered wall surfaces and applyng two coats of oil bound distemper complete all as specified and directed .

Material and Labour for preparation of old painted wooden surfaces of any description , not otherwise described over 10 cm width or girth and apply one coats of synthetic enamel paint complete all as specified and directed.

Material and Labour for preparation of old painted steel surfaces of any description , not otherwise described over 10 cm width or girth and apply one coats of synthetic enamel paint complete all as specified and directed.

Material and labour for complete removal of of existing treatment from wall surfaces and applying two coat of weather coat paint Apex (Ultima) or equivalent as approved by GE after preparation of surface and over and oncluding one coat of primer/putty complete all as specified and directed.

Taking down grit plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

Material and labour for washed stone grit plaster on exterior walls in two layers, under layer 15mm thick ( average) in cement plaster 1:4 (1 cement: 4 Coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 Cement(appx 35 % white and 65% grey) with reflectance 50+1% or silver cement of co like M/s shriram cement works with reflectance: ½ coarse sand :2 stone chipping 12mm nominal size) in panels with groove all ground as per approved pattern including scrubbing and washing, the top layer with brushes and water mixed with H2SO4 @ 5% to expose the stone chippings complete all as specified .

Material and labour for rendering, 15 mm thick in cement mortar (1:6) on fair faces of brick wall finished even and fair including taking down cement plaster on birck work or stone walls etc including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for preparation of new plaster surfaces of wall & applyng two coats of cement base paint of approved colour over and including one coat of cement primer complete all as specified and directed .

Material and labour for preparation of newly plastered wall surfaces and applyng two coats of oil bound distemper over a coat of wall care putty ( JK/Birla) complete all as specified and directed .

Supply and fix rolled mild steel as chajja/sunshade etc including distance pieces, cleats etc including notching, drilling, fittings, reveting or welding or connecting with bolts and nuts (including revets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc, also for wedging, plumbing, truing up and fixing conf to Fe-410-W (Gde-E-250) quality 'A' complete all as specified and directed.

Supplied and fixed 2mm thick fiber glass reinforced translucent corrugated sheet with corrugation side lap fixed with coach screws suitable size and washers etc complete all as specified and directed.

Demolitin brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

Supply and Fix in repair 50mm wide rubber beading for doors of required size complete all as specified and directed.

Supply and Fix floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm/140mm fixed to wooden of aluminium door shutter complete all as specified and directed.

Supply and fix in repair 25mm dia vista pattern curtain rod of approved finish of superior quality including fancy type knobs at both ends, bracket for supports and rings etc complete all as specified and directed.

Supply and Fix in repair stainless steel plate rack 0.80 mm thick stainless steel of size 900mmx750mmx250mm with all internal fittings (as per sample) approved by Engr-in-Charge complete all as specified and directed.

Supply and Fix in repairs sink with draining board made of stainless steel 1.00mm thick for kitchen with lug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes overall size 915mmx420mm, bowl size 410mmx330mmx160mm complete all as specified and directed.

Material and labour for repair to built in cupboard/table fitted in wall by tightening screw/welding of hinges/handles/piano hinges or panel to work smooth complete all as specified and directed.( Note:- existing fittings to be reused in repair work)

Supply and fix in repair auto hinges for cabinet case complete all as specified and directed. (Make: KARF/HETICH).

Supply and fix in repair stainless steel cutlery of size 17"x20"x6" complete all as specified and directed. (Make: Everlite/Slimline/Peacock/Fabshine).

Supply and fix stainless steel plain basket of size 17"x20"x6" complete all as specified and directed. (Make: Everlite/Slimline/Peacock/Fabshine).

Supply and fix in repair stainless steel grain trolly with stand of size 21"x17"x10" complete all as specified and directed. (Make: Everlite/Slimline/ Peacock/Fabshine).

Supply and fix in repair stainless steel cup of soucer, trolly of size 17"x20"x4" complete all as specified and directed. (Make: Everlite/Slimline/Peacock/Fabshine).

Supply and fix in repair stainless steel plate basket of size 17"x20"x6" complete all as specified and directed. (Make: Everlite / Slimline / Peacock / Fabshine).

Supply and fix in repair 20" long telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed. (Make: Nixon/Radol/Ozone Ultima).

Material and labour for 18mm thick multi layer waterproof plywood fixed with screws to timber frame work for cabinet case both side covered with .80mm thick decorative laminates, mica type 1 of surface finished , colour and pattern as approved adhessive as sper ,manufacturer instruction complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 150mm size stainless steel bright finish handle for cabinet shutter complete all as specified and directed.

Material and labour for taking out bushes from the bldg at any height including necessary scaffolding , digging out roots, cutting brick wall , refilling cutting portion with new fly ash brick work in CM 1:4 or PCC 1:2:4 type B1 using 20 mm crushed stone agg , making good surfaces to match the existing , removing of roots bushes etc to a distance n.exc 50m and clearing the site complete all as specified and directed by Engr-in-Charge.

Material and labour for aluminium window repairs including taking down windows shutter , change the rubber beading and defective item and refixing the shutter to window complete all as specified and directed by Engr-in-Charge.

Supply and fix 12 mm thick insulated PVC wall lining consisting of PVC insulated panels having expanded polystyrene (EPS) stuck to 2mm thick PVC insulated panel with single side prelam PVC sheet duly fitted into the wall complete all as specified and directed.

Material and labour for rectifying the leakage of bib taps/stop cock/angle valve/pillar taps/angle cock by replacing rubber /PVC washer and brass spindle of required size complete all as specified and directed by Engr-in-Charge.

Material and labour for rectifying the leakage of wall mixer/wash basin mixer/sink mixer of any type by replacing rubber /PVC washer and brass spindle of required size complete all as specified and directed by Engr-in-Charge.

Material and labour for rectifying the leakage of shower rose/health faucet/ jet spray of any type by replacing rubber /PVC washer of required size complete all as specified and directed by Engr-in-Charge.

Material and labour in repair for double action projection type/friction type hinges of old doors including necessary welding, drilling, screwing to chowkhats complete all as sper directed by Engr-in-Charge.

AR Enterprises

vibha associates

SHAKTI CONSTRUCTION CO

Rajneesh Jain