REPAIR MAINT OF OLD CFL HPS MH SECURITY PARAMETERS GARDEN LIGHTS WITH LED FITTINGS AND SOLAR LIGHTS AND MAINTS OF SEWAGE PUMPS ETC AT AIR FORCE STATION DADRI

Amount

Supply and fixing LED energy saving and environmental friendly long life versatile pressure diw cast aluminium IP 66 roadway luminaire with high power LEDs and electronic diver complete set of 45 /48 wattage 6000K, with PF-=>0.95, THD-<=10%, driver should be same make as of LED fitting, with operating range of 140 V to 280 V, isolation of driver facility complete all as specified and directed by Engr in charge.

Supply and fixing LED FLOOD light fitting powder coated PDC aluminium body with toughened glass visior of 70 wattage 5700K IP 66 complete all as specified and directed by Engr in charge.

Supply and fixing LED FLOOD light fitting powder coated PDC aluminium body with toughened glass visior of 120 wattage 5700K IP 66 complete all as specified and directed by Engr in charge.

Supply and fixing LED Post top fitting 40 Watt 5700 K CCT IP 65 powder coated aluminium die cast and spun aluminium with clear diffuser suitable for landscape lighting inclmaking necessary arrangement for mounting fitting as reqd on site and testing complete all as specified and directed by Engr -in-Charge.

Supply and fixing LED Bollard light fitting IP 54 powder coated PDC aluminium body with opal diffuser suitable for landscape lighting incl making necessary arrangement for mounting fitting as reqd on site and testing complete all as specified and directed by Engr -in-Charge

M&L for LT/HT pole painting two coated anti corrosive synthetic enamelled silver paint as per existing condition incl rubbing old surface with emery paper alternate black and yellow 30 cm wide strip upto 1.5 mtr of pole above ground level and marking pole numbers complete all as specified and directed by Engr in charge.

Demolition of cement concrete (unreinforced) in ground floor and pavings exceeding 15cm thickness but above ground floors complete all as specified and directed by Engr in charge.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation for LT pole / foundation mass filling or path/hard standing etc as reqd on site complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-2 using 20mm graded stone aggregate for coping of pole using extra cement for smooth finish including form work / foundation mass filling or path/hard standing etc as reqd on site complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D-2 (Using 40mm grade stone aggregate) as in bed for pole in foundation filling and mass concrete/ foundation mass filling or path/hard standing etc as reqd on site complete all as specified and directed by Engr-in-Charge.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type complete all as specified and directed by Engr in charge.

All as item No 11 above but for cable of size 70 to 95 sq mm complete all as specified and directed by Engr in charge.

M&L for overhauling of battery by disconnecting battery from GI pole and removel of suphation, cleaing of plate and all parts painting of poles Bty box etc with two coats of aluminium silver paints and fill up distil water full as required and testing after reassembling all as directed and specified by Engr in Charge.

Supply and fixing in replacement Battery suitable for Solar light 43 Watt 12 V complete all as specified and directed by Engr in charge.

Supply, Fixing and testing solar street light LED fitting suitable solar light 43 Watt complete all as specified and directed by Engr in charge.

Supply and fixing in replacement Charge controller/drive circuit suitable for solar light upto 43 Watt complete all as directed .

Supply & Fixing in repair of Four Pole Contactor, Capacity 250 Amp, 415V AC, 2 NO+NC, complete all as specified and directed by Engr in charge.

All as above item No 17 but capacity 160 Amps complete all as specified and directed by Engr in charge.

All as above item No 17 but capacity 100 Amps complete all as specified and directed by Engr in charge.

All as above item No 17 but capacity 32 Amps complete all as specified and directed by Engr in charge.

S&F OFF load Change Over Switch 250 Amps 4 pole 415 Volt complete all as specified and directed make Havells/L&T/Legrand complete all as specified and directed by Engr in charge.

M&L for Surface cleaning/site clearance n exc 15 cm in depth execept in Sub stations area, trenches,sub station rooms two pole/ foure structure surroundings to make a over all presentable condition all as directed by Eng In charge.

M&L for painting of old LT panels of any size and descreption with two coat anti corrosive synthetic enamelled smoke gray paint or as per existing condition required on site incl rubbing old surface with emery paper complete all as specified and directed by Engr in charge.

Supply & filling in Bty distil water suitable for Bty Charging any type complete all as specified and directed by Engr in charge.

Supply and Fixing including repair/replacement of LED driver 230 volt single phase of 45/48 watt, driver life >= 25000 Hrs efficiency - 85%, with out put short circuit protection all as specified and directed by Engr-in-Charge.Make – Havells/Halonix/Polycab

S & F in replacement of hot pressed moulded SMC boxes with hinged door fixing of size 230 mm x 170mmx105 mm complete with suitable aluminium busbar 4 Nos fixed in side the box Make :- Sintex /Hensel or equivalent model complete all as specified and directed by Engineer-in Charge.

M & L for replacement of cable PVC insulated unarmored for connection 2.5 sqmm x 3 core Copper conductor duly drawn MS conduit 20 mm dia from cut out junction box to street light fittings on poles including PVC flexible pipes complete all as specified and directed by Engineer-in - Charge.

M&L for cross arms (MC 75), bracings, supports, clapms and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one prime coat, one under coat and one finishing coat paint complete all as specified and directed by Engr-in-Charge.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion as specified & directed by Engr-in-Charge.

All as above item No 29 but with earthing lead 25 x 4 mm GI strip complete all as specified and directed as required on site complete all as specified and directed by Engr in charge.

S & F Earthing lead 25 x 4 mm GI strip complete all as specified and directed by Engr in charge.

All as Item ser No 58 above but earting lead 32 x 6 mm GI strip complete all as specified and directed as required on site complete all as specified and directed by Engr in charge.

S&F Busbar boxes including aluminium busbar grout with proper nut, bolts fixing on wall proper connection with lugs including painting, making good surface complete all as specified and directed by Engr in charge.

M&L for dismantling and taking down mono block booster pumps/Non clogging sewage pump up to 5HP motor for repair/overhauling including disconnecting, transporting to local workshop for repair/reassembling the same after replacing following work out spares including alignment and replacement of foundation bolts and necy civil works like plastering brick work, PCC for foundation:(i) Replacement of pump bearing (as per sample)-02 nos (ii) repair /straighteing of Pump shaft. (iii) Replacement of glands/nuts/bolts -01nos. (iv) replacement of shaft key -01 nos.( v) repalcemnt of Pump Impeller complete all as specified and directed by Engineer -in-Charge.

M/S Anand Enterprises

PRASAD ELECTRICALS

Akhil Enterprises

Simran construction Company

Sumit Enterprises

Singh Associates

GAR CONSTRUCTIONS