NIT NO. 302/DURG(Kawardha)/2026

Wiring for light/fan/exhaust fan/ call bell point with 1.5 sq mm FR PVC insulated stranded copper conductor single core cable in concealed PVC conduit, with 5 amp piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with same size cable etc as required

Point

Medium point

Long point

Wiring for twin control light point with 1.5 sq mm FR PVC insulated stranded copper conductor single core cable in concealed PVC conduit, with 5 amp piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with same size cable etc as required

Wiring for power plug point with 2X4 s.q. mm FR PVC insulated stranded copper conductor single core cable in concealed PVC conduit, along with piano type 16 amps switch and 6 pin 16amps socket outlet with suitable size size M.S. box and earthing the point with same size cable etc. as required

Point

Medium point

Long point

Extra Long point I

Extra Long point II

Extra Long point III

Extra Long point I

Extra Long point II

6 X 2.5 sq mm in 25 mm conduit

3 X 4 sq mm in 25 mm conduit

3 X 6 sq mm in 25 mm conduit

3 X 10 sq. mm in 25 mm conduit

4 X 16 sq. mm in 25 mm conduit

4X25 sq. mm + 2X16 sq. mm in 50mm conduit

computer outlet jack

Providing and fixing composite board for computer points having piano type 1 No 6 pin 16 amp socket outlet, 1 No 16 amps switch and 3 Nos 3 pin 6 amp socket outlet, 3 Nos 6 amps switches suitable M.S box, 3 mm thick phenolic laminated sheet cover including painting etc. as required.

Supplying and fixing 3 pin, 5 amp celing rose on the existing junction box/ Wooden block including connection etc as required

Supplying and fixing polycarbonate batten holder/angle holder including connection etc. as required

Supplying and fixing call bell/uzzer suitable for single phse 230 volt A.C. Supply, complete as required

Providing and fixing round/hexagonal fan box (125 mm dia) depth 75 mm (max.) with 12 mm dia steel bar hook, 1.6 mm thick MS sheet cover, in RCC slab etc. as required

Providing and fixing phenolic laminated sheet cover of 180 mm dia 3 mm thick on the fan box etc. as required (if provided at the time of installtion of celing fan)

300 mm sweep

300 mm sweep

4'X40 W single Patti Type

4' X40 W single box type

Single box type with decorative end caps

Extra for installtion of all type of fluroescent fitting (luminaries) hanging with 2 no. ball and socket arrangment with 30 cm long 1.6 mm thick, 20 mm dia steel conduit down road, wiring the down road with 3 X 1.5 sqmm FR PVC insulated copper condutor cable (insted of surface) etc. as required.( these are to be paid over rate of installtion on direct on ceiling surface)

4' X 36/40 Watt

4' X 28 Watt (T-5)

6 amp to 32 amp

6 amp to 32 amp

6 amp to 32 amp

6 Way single door

Earthing with GI earth plate 600 mm X 600 mm X 3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangment and watering pipe with charcoal and salt as required

2.0 ton split type capacity 6000 Kcal/hr.

SOR Item No.

Prime coat Providing and applying primer coat with bitumen emulsion (SS-1, grade confirming to IS:8887) on prepared surface of granular base including clearing of road surface and spraying primer using mechanical means as per clause 502.

Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406.

Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503.

Providing and laying leveling course / profile corrective course with bituminous macadam With minimum 40-60 TPH capacity hot mix plant using crushed aggregates of Grading-1 premixed with bituminous binder @ 3.1% transported to site and laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause-501.6 and 501.7 to achieve the desired compaction complete in all respect and as per relevant clause section 500.

Close Graded Premix Surfacing/Mixed Seal Surfacing Mechanical means using minimum 40-60 TPH capacity of HMP. Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness using bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade, complete as per clause 508.