SPECIAL REPAIRS TO BLDG NO T-45 (OFFICE COMPLEX) FOR REPAIR/REPLACEMENT OF ROOF SHEET AND FALSE CEILING AT HQ 31 ARTY BDE CAMP TAGORE LINE JHANSI CANTT UNDER GE JHANSI

Amount

Demolition of cement concrete in ground floor & paving n exc 15 cm thick below or above ground leveling including removal , complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cm 1:6 for laying of floor tiles complete all as directed at site complete all as specified and directed

M&L 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate bedding of tiles/Kota stone all as specified and ditedted at site complete all as specified and directed

M&L for coloured vitrified tiles size 600x600x10mm in floor etc set and jointed in neat cement slury over and pointed with coloured cement to match the shade of tiles complete all as specified and directed

M&L for coloured vitrified tiles size 600x600x10mm in dado/skirting etc set and jointed in neat cement slury over and pointed with coloured cement to match the shade of tiles and rendering 10mm thick in CM 1:4 on fair surfacess for laying tiles as in skirting and dado etc complete all as specified and directed.

Dismaintling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for joint free non skid coloured tiles 7 to 8mm thick area of each tile exceeding 0.18Sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F, Glazed ceramic tiles Coloured 450mmx300mmx7mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed.

S&F granite of any type tiles machine cut bedded and jointed with grey cement slurry mixed with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and as directed.

Demolition of brick masonary built in cement mortar complete all as specified and directed

Brickwork with sub class B bricks straight or curved on plan etc 6m mean radius buiilt in CM (1:4) complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal of bore 15 mm complete all as specified and directed.

All as per item 12 here in before but 20 mm bore pipe complete all as specified and directed.

S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified and directed

All as per item No 14 herein-before but 15mm dia gavanised steel tubes, medium grade - complete all as specified and directed

S&F in repairs 500 ltrs capacity rotational moulded polythylene water storage tank(cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia PVC float valve complete all as specified and directed

S&F in replacement of bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as specified and directed. Make: Hindware(cat No-F200003)/ Cera(Cat No - F2002150)/ Prayag cat No-6606)/ Parryware euivalent.

S&F in replacement of angular stop cock with flange 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all as specified and directed. Make : Hindware(Cat No- F320006)/ Cera(Cat No- F2008201)/ Prayag (Cat No PR 544 Droplets S)

S&F in replacement of bottle trap 32 mm sizewith 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed. Make : Hindware/ Cera/ Parryware / Prayag / Pearl.

S&F in repairs 15mm bore two way Angle cock brass CP fancy type complete all as specified and directed. (Make jaguar or equvilent)

S&F SS grating of round shape dome type 4" to 5", floor trap traps etc, complete all as specified and directed. Make : Camry / Cera / Parryware / Prayag (Cat No- FT 03 M)

S&F in replacement of Corner glass shelf 300 mm with ABS 300mm x 600mm bracket and fixing accessories, complete all as specified and directed. Make : Hindware/ Cera(Cat No- F5005503)/ Parryware / Prayag(Cat No- BEA-46 ) / Pearl.

S&F in replacement of towel rail 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as specified and directed. Make : Hindware(Cat No- F840013)/ Cera(Cat No- F5003103)/ Parryware / Prayag(Cat No- BA 30 cantabile S)

S&F in replacement of towel ring round shape of suitable size made of cast copper alloy, chromium plated, complete all as specified and directed. Make : Hindware(Cat No-F880009) / Cera(Cat No-F5002105)/ Prayag (Cat No - BA-41 cantabile S)/ parryware equivalent

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf min12cm wide with chromium plated bracket guard and railing min 50 cm long, complete all as specified and directed. Make : Prayag/ Hindware(Cat No- F840011)/ Parryware/Cera(Cat No- F5001114) / Prayag(cat No- BEA-45) / Pearl.

S&F for 700x500mm 5mm thick glass mirror with double coat for protection and longevity grounded edges for safty and silver plating on the back for better reflection complete all as specified and directed. Make cera cat no B3510112 .

S&F in replacement of health faucet with 8 mm dia, 1.0 mtr long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed. Make : Hindware(Cat No- F160068)/ Cera(Cat No- F8030202)/Prayag(Cat No BEA-81 Droplets series )

S&F in replacement of Cente hole wash basin mixer, including all connecting fitting Pop up system for fixing on wash basin ,cast copper alloy, chromium plated fancy type, suitable for 15 mm dia bore pipe, complete all as specified and directed. Make : Hindware (Cat No- F110009CP ) / Cera(cat No- F2002461 )/ Prayag(Cat No- 8350) /Parryware equivalent .

S&F in replacement of 3-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upperside, connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as specified and directed. Make : Hindware(Cat No-F390020)/ Cera(F1003401)/ Prayag(Cat no-8175Niagara) /Parryware equivalent

S&F in replacement of swan neck sink mixer wall mounted , 15 mm dia with flange made of cast copper alloy, chromium plated, complete all as specified and directed. Make: Hindware(Cat No-F280020)/ Cera(Cat No-F1014501)/ Prayag(cat No-9255) / Parryware equivalent .

S&F in replacement of overhead shower round shape single flow, ABS body chrome plated fancy type, with and incl shower arm round shape with 90° bend with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed. Make : Hindware(Cat No-F160004)/ Cera(Cat No-F7020306)/ / Prayag(Cat No- BS- 65 Vincent S )/Parryware equvalent .

M&L One piece closet with integrated cistern, seat cover and twin flush fittings with 'S' or 'P' Trap size 710x370x650mm in repair complete all as specified and directed. Make : prayag VIVA series OR equivalent

S&F in repair pedastal type vitreous china wash basin white flat back size 580 x 450mm excluding taps waste, chain and plug and porcelain stopper but including brackets incl cuts for and pinning ends of brackets as existing stand complete all as specified and directed

M&L for 32mm waste coupling of CP (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F 40 mm bore PVC rigid PVC of n.exc 1 M waste pipe for kitchen sink WHB c complete all as specified and directed.

S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as specified and directed. Make : Prayag(Cat No-152) / Polytuff / Pearl

S&F stainless steel kitchen sink 1mm thick with plug, waste pipe. Washers including cantilever cast iron brackets, connecting union etc over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete with fixing accessories and fixed in position complete all as specified and directed. Make - Prayag /Nirali

M& L for in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed

S&F powder coated aluminium window shutter Sliding type with frame of powder coated aluminium channel section suitable for sliding aluminium shutters weighing 0.55Kg/M of three channel including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire gauze including necessary locking arrangement and handle etc; complete all as specified and directed.

S&F in repair powder coated aluminium ventilator Luver type with frame , aluminium section weighting 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener, etc complete all as specified and directed.

S&F in repair Aluminium powder coated window guards framed with aluminium window section for window guards 4mm dia expanded shape fixed with wall fastner to opening complete all as specified and directed.

S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars railing and similar works conforming to Fe 290. Gde-E165 complete all as specified and directed.

M&L for powder coated aluminum window shutters, side hung type without sash bars, aluminium sections for frame weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminum snap beading, screws, powder coated aluminum fittings such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 No), suitable handle (01 No), complete all as specified and directed.

M&L for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed.

M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed.

M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws etc, complete all as specified and directed.

M&L for powder coated aluminium wall partition, window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc, complete all as specified and directed.

S&F mortice lock of size 100mm, 4 lever type, duly fixed in aluminium door, complete all as specified and directed.

M&L for double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F of MDF board, 5.0 mm thick, interior grade, both side prelaminated with wooden texture, suitable for aluminium window / Ventilators / door opening and similar work, complete all as specified.

S&F of glass, tinted type, 5.0 mm thick, each panes not exc 0.5 sqm, suitable for aluminium window / Ventilators / door opening and similar work, complete all as specified and directed.

S&F of 25 micron glass film sticked to glass panes as per manufacturer's instruction, complete all as specified and directed.

Demolition of RCC not exc 15cm thickness in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.

M&L for RCC Type B2 1:1.5:3 (20 mm stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, chajja, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for mild steel deformed TMT bars 5 mm to 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

Form work to sides and soffits of suspended slabs such as roof slabs, floor slabs and lintels/beam, chajja landing and similar work n exc 200mm thick, complete all as specified and directed.

Hacking out old broken glass (any thickness size & quality or description) from wooden frames or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick figured glass pin headed type and glazing with oil putty/wooden beads in .square n. exc. 0.5 sqm in each pane complete all as specified and directed.

All as per item No 59 but plain ordinary sheet glass complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

M&L for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed.

S&F in repair 300 mm rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 150mm length floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair toilet paper holder of brass CP fixed to walls with chromium plated box type complete all as specified and directed.

Taking down of wooden chowkhat or frames exc 1.5 Sqm but n.exc 4 Sqm without taking off shutters from the frame complete all as specified and directed.

All as per item No 66 but n.exc 1.50 sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm and n.exc 2 Sqm each complete all as specified and directed.

M&L for mild steel section as in door/windows chowkhats frame of steel gate of grade Fe-410-0 or Fe-310-0 including all necessary machine wks i.e. cutting, welding, grinding etc, complete all as specified and directed.

M&L 35mm thick factory made moulded glazed and skeleton shutters open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain champhered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters complete all as specified and directed. Make : Rajshree / Sintex

S&F of 35mm thick factory made moulded designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed. Make : Rajshree / Sintex / Greenlam

S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood coloured PVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8, on Page no - 175), complete all as directed. Make : Rajshree / Sintex

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick Wooden texture moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed. Make : Rajshree / Sintex

S&F 100mm long aluminium anodised barrel tower bolt of extended section complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extended section complete all as specified and directed.

S&F of 250mm long mild steel, sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple or embedded section and fixing bolt and sliding bolt of embedded sections or cast aluminium alloy complete all as specified and directed.

M&L for 100mm butt hinges medium weight cold rolled MS in repair complete all as specified and directed.

S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed

S&F of 150mm aluminium handle, cast type anodised complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key scrubbing down with water complete all as directed at site.(including skirting and dados)

M&L 15mm thick cement plaster on fair face of brick or concrete surfaces in cm 1:6 finished even & smooth without using extra cement complete all as specified and directed.

M&L 15mm thick cement plaster on fair face of brick or concrete surfaces in cm 1:4 finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered surface of wall and applying two coats of weather proof exterior grade emulsion paint over and including a coat of cement based primer, complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over coat of puuty to make the surface to be plain and smooth complete all as specified and directed.

M&L for complete removal of existing treatment by brusing,washing,rubbing down,scraping, watering and applying two coat of oil bound distemper over a coat of putty on old plastered surface of internal wall complete all as specified and as directed.

M&L preparing old treated wooden surfaces and applying one coat of synthetic enamel paint exc 10 cm width complete all as specified and as directed.

M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed

M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels complete all as specified and as directed.

S&F PVC (SWR Pipes of 110 mm bore single socketed in any length with rubber ring joints fixed in wall or cutting and concealed in wall complete all as specified and as directed.

All as per item 90 herein before but 75mm dia complete all as specified and as directed.

M&L for 110mm bore PVC (SWR)bends any radius complete all as specified and as directed.

M&L for 75mm bore PVC (SWR)bends any radius complete all as specified and as directed.

S&F PVC (SWR) 'P' trap 110/110mm bore complete all as specified and as directed.

S&F PVC connection 15mm size with brass nuts of length 450mm long complete all as specified and as directed.

All as per item No 95 herein before but 600mm long for geyser complete all as specified and as directed.

M & L Colour Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness pointed with grey cement and pigment complete all as specified and as directed.

M & L Sand filling under floors or in foundations including spreading & leveling complete all as specified and as directed.

Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed.

Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed.

S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated sheeing with two corrugations side lap fixed with coach screw and waher in roof ,wall etc complete all as specified and as directed..

M&L for structural steel Fe-410-W(Gde-E-250) quality A for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.

Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision new pressed flush metal boxes readily available covered with outer plates / inner plates etc as per requirement at site for mounting modular switches , sockets , fan regulators etc including testing on complete all as specified and directed for the following points:- Make For Conduit : -AKG/ Atul/ Kalinga/Precision/Modi ; Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

One light point controlled by one switch complete all as specified and directed

One ceiling fan controlled by one switch and one regulator complete all as specified and directed

One Exhaust fan controlled by one switch complete all as specified and directed

One 6A socket point controlled by one switch on independent board complete all as specified and directed

One 6A socket point controlled by one switch on same board complete all as specified and directed

One Bell point controlled by one switch complete all as specified and directed

All as per srl item no. 108 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.

M&L for Circuit/submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed:- Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

All as per srl item no. 110 here-in-before but 2runsX4 Sqmm +1runX4Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

Notes for item No. 108.00 to 111.00 (i) Quoted rate shall deemed to incude the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & caping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing caping may be used in that portion. Make For Conduit : -AKG/ Atul/ Kalinga/Precision/Modi Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

S & F Modular switch 1 way 6A , 1 module size ccomplete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S & F Modular switch 1 way 16A , 1 module size complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S & F Modular Socket , 6 A , 5 Pin , 2 module size complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S & F Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S & F Modular Step fan regulator 120 W, 2 module size complete all as specified and directed Make :Havells(Reo) /Goldmedal /SSK /GM

S & F Modular Bell push 1 way 6A , 1 module size complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S&F electric bell of Multi Music type, 240 volts, single pole and making all necessary connections, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S & F in replacement of Modular TV socket co axial type, 01 Module 250 volts complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S&F, in replacement of Modular Telephone socket (RJ 11 Socket Jack) 01 Module size complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S&F, in replacement of Modular blank plate 01 Module size complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM .

S&F, angle holder, metal cased, bakelite body, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S & F 7 W White/Red/Green in colour LED retrofit lamp suitable for B-22 holder base with polycarbonate diffuser and aluminium heat sink complete all as specified and directed. Make :- Havells/Bajaj/Wipro/Osram/Philips

S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

Supply and fix LED building security light fitting 25 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP 65degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed. Make: Havells / Bajaj / Wipro / Philips /Osram

Supply and fix LED batten box type with CRCA sheet steel body pre-wired suitable for and including provision of 1x20/22Watt (4 feet) retrofit LED tube with PC body and connecting up with twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed. Make: Havells / Bajaj / Wipro / Philips /Osram

Supply and fix recessed mounted LED panel light 2'x2' size, 36 watts full white with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for Amstrong / grid false ceiling complete with fixing accessories and all as specified and directed. Make: Philips / Havells / Wipro / Bajaj / Osram

S&F, in replacement of bulk head light fitting including 5W retrofit LED lamp and making all electric connections complete all as specified and directed. . Make: Havells / Bajaj / Wipro / Philips /Osram

Supply and fixed LED batten 9W/10W (2 Feet) complete with polycarbonate diffuser and built in with electronic driver including connecting up with twin core twisted flexible copper conductor form ceiling rose to connector of fitting complete all as specified and directed. Make: Havells / Bajaj / Wipro / Philips /Osram

Supply and fix MCB distribution board, TPN, 4 way 415 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: MCBs shall be measured and paid separetely. Make : Indo Asian / L&T / Havells

All as per srl item no. 131 here-in-before but SPN 08 way 230 Volt, complete all as specified and directed. Make : Indo Asian / L&T / Havells

S& F MCB TPN 63 Amp, 10 KA, 'C' curve, 430 V, 50 Hz complete all as specified and directed. Make : Standard / Indo Asian / L&T / Havells

All as per srl item no.133 here-in-before but SPN 40 Amp 230 Volt complete all as specified and directed. Make : Indo Asian / L&T / Havells

All as per srl item no. 133 here-in-before but 6 to 32 Amp, Single Pole 230 Volt complete all as specified and directed. Make : Indo Asian / L&T / Havells

Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 25A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Make : Indo Asian / L&T / Havells

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 16 sq mm 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down existing service cable of any description complete all as specified and directed. Make: Havells /Polycab /Univarsal/Gloster/Asian Cable/RPG

M&L for High density polyethylene pipes (HDPE) 50mm dia of pressure rating 6 kgf/cm2 laid in trenches/floors/duct or fixed on walls /pole for cable protection complete all as specified and directed. Make: Finolex / Kisan / Prince / Tirupati /Supreme / Jain Irrigation Sys

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of cable and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.

Taking down ceiling fan of any size carefully, sealing cable end, dismantling blades and removing fan and blades to store for servicing including supply, replacing bearings/bushings, capacitor and terminal connector including capacitor holder suitable for any model of existing fan, Painting of ceiling fans complete, with one coat of synthetic enamel paint by spraying including filling cavities with filler, after cleaning all dust etc and Hanging ceiling fan in its existing or new location and connecting up including provision of 3core flexible copper conductor cable 0.5 sqmm from ceiling rose or connector to fan and testing for satisfactory functioning complete all as specified and directed.

Supply and fix in replacement of ventilating fan with plastic body with louvers, 250mm sweep, single phase, 230 volts, 50 Hz. complete all as specified and directed. Make : Bajaj / Havells / USHA / Crompton

M/s SAS Constructions

Soni Traders

M/S MAISUR CONSTRUCTION COMPANY PRIVATE LIMITED