REPAIR, MAINT, PAINTING AND POLISHING OF CERTAIN FURNITURE AT SIGAR MIL STN UNDER GE 872 EWS

Amount

M & L for Removing Denting and Making Good Bends (if any), Re-fixing of Loose Shelves with Mild Steel Stay Hook (as required), Preparing Old Painted/ Treated both Internal & External Surfaces of Almirah Large Steel by Removing Loose Paints and Providing Putty and Primer where required to obtain a Smooth Surface and applying a Coat of Synthetic Enamel Paint (Ist quality Smoke Grey or Olive Green Colour as ordered) with Spray Painting Machine complete all as specified and as directed. (Drawing No. FD-1031)

M & L for Removing Denting and Making Good Bends (if any), Re-fixing of Loose Shelves with Mild Steel Stay Hook (as required), Preparing Old Painted/ Treated both Internal & External Surfaces of Almirah Medium Steel by Removing Loose Paints and Providing Putty and Primer where required to obtain a Smooth Surface and applying a Coat of Synthetic Enamel Paint (1st quality Smoke Grey or Olive Green Colour as ordered) with Spray Painting Machine, complete all as specified and as directed. (Drawing No. FD-1032)

S & F Mild Steel Lock with Duplicate Key of size 40mm, 6 Lever (as approved) for Almirah Large Steel / Almirah Medium Steel including Taking out/down unserviceable Lock, complete all as shown in Drawing/specified and as directed. (Drawing No. FD-1031 & FD-1032)

S & F Mild Steel Handle, Chromium plated (as approved) for Almirah Large Steel / Almirah Medium Steel of size as shape as per the existing one including Taking out/down unserviceable Handle, complete all as shown in Drawing/specified and as directed. (Drawing No. FD-1031 & FD-1032)

M & L for Corner Cleat made out from Mild Steel Sheet of 3.0mm thick for Shelves of Almirah Large Steel and applying one Coat of Synthetic Enamel Paint (1st quality) over a Coat of Red Oxide Zinc Chrome Primer to match the Existing Surface including Taking out/down unserviceable Cleat, complete all as shown in Drawing/ specified and as directed. (Drawing No. FD-1031 & FD-1032)

M & L for Long Rail 1.98 Metre long for Charpoy GI Pipe made out from GI Pipe 32mm bore, medium grade, threading Both Ends upto 25mm and free for Elbow including Taking out/down unserviceable Long Rail complete all as shown in Drawing/specified and as directed. (Drawing No. FD-220)

M & L for Short Rail 820mm long for Charpoy GI Pipe, obtained from Serviceable Portion of Long Rail, made out from GI Pipe 32mm bore, threading Both Ends upto 25mm and free for Elbow including Taking out/down unserviceable Short Rail complete all as shown in Drawing/ specified and as directed. (Drawing No. FD-220)

M & L for Leg 380mm long for Charpoy GI Pipe, obtained from Serviceable Portion of Long Rail, Short Rail, made out from GI Pipe 32mm bore, threading Both Ends upto 25mm and free for Elbow including Taking out/down unserviceable Leg, complete all as shown in Drawing/specified and as directed. (Drawing No. FD-220)

S & F GI Check Nut suitable for GI Pipe 32mm bore of size as per the existing one fixing to Charpoy GI Pipe including Taking out/down unserviceable Check Nut complete all as shown in Drawing/specified and as directed. (Drawing No. FD-220)

S & F Elbow 3-Way, Class AA or conforming to IS, suitable for GI Pipe 32mm bore fixing to Charpoy GI Pipe including Taking out/down unserviceable Elbow, complete all as shown in Drawing/ specified and as directed. (Drawing No. FD-220)

M & L for Mild Steel Square Pipe 25x25x2.0mm thick, 900mm in length, Welded to GI Pipe to support Plywood of Charpoy GI Pipe complete all as shown in Drawing/ specified and as directed. (Drawing No. FD-220)

M & L for Plywood Top for Charpoy GI Pipe of 12mm thick, BWR Grade, 7 Ply of size 1980x910mm and fixing with 6 No. Mild Steel Bolt, Nuts and Washer for Charpoy GI Pipe including Removing worn out Nylone Newar from Charpoy GI Pipe complete all as shown in Drawing/ specified and as directed. (Drawing No. FD-220)

M & L for First Class Hardwood (well seasoned) Front Leg for Chair Dining, made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Leg from Chair Dining, complete all as shown in Drawing/specified and as directed. (Drawing No. FD-279)

M & L for First Class Hardwood (well seasoned) Rear Leg for Chair Dining, made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Leg from Chair Dining, complete all as shown in Drawing/specified and as directed. (Drawing No. FD-279)

M & L for First Class Hardwood (well seasoned) Front Rail for Chair Dining , made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Rail from Chair Dining, complete all as shown in Drawing/specified and as directed. (Drawing No. FD-279)

M & L for First Class Hardwood (well seasoned) Rear Rail for Chair Dining, made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Rail from Chair Dining, complete all as shown in Drawing/specified and as directed. (Drawing No. FD-279)

M & L for First Class Hardwood (well seasoned) Side Rail for Chair Dining, made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail from Chair Dining, complete all as shown in Drawing/specified and as directed. (Drawing No. FD-279)

M & L for First Class Hardwood (well seasoned) Stiffner for Chair Dining, made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Stiffner from Chair Dining, complete all as shown in Drawing/specified and as directed. (Drawing No. FD-279)

CHAIR CB STEEL WITH ARMS (Drg No. 6/29/2019- FD-75 (M)) Supply & fix seat frame of chair CB steel with arm made up with well seasoned 2nd class hard wood free from crack, knot and canning with best quality half round white plastic cane, 2mm wide and 4mm wide at border (canning shall be of Godraj Pattern) and applying french polish including prepration of surfaces and obtaining optimum finsihed surface after taking out old unserviceable seat complete all as specified show on drawing. (Note:- Each seat frame of chair shall be measured as one unit. Make of cane:- Super, Arihant /Premier.)

CHAIR CB STEEL WITH ARMS (Drg No. 6/29/2019- FD-75 (M)) Supply & fix back frame of chair CB steel with arm made up with well seasoned 2nd class hard wood free from crack, knot and canning with best quality half round white plastic cane 2mm wide and 4mm wide at border (canning shall be of Godraj Pattern) and applying french polish including prepration of surfaces and obtaining optimum finsihed surface after taking out old unserviceable seat complete all as specified show on drawing. (Note:- Each back frame of chair shall be measured as one unit. Make of cane:- BR Super, Arihant /Premier.)

Taking out old unserviceable arm rest of chair CB steel with arm and supply & Fix new arm rest made of well seasonned first class hard wood, teak wood, and appying french polish, glossy finish including prepration of surfaces and obtaining optimum finsihed surface complete all as specified show on drawing. (Note:- Each arm shall be measured as one unit.) (Drg No. 6/29/2019- FD-75 (M))

CHAIR CB STEEL WITH ARMS (Drg No. 6/29/2019- FD-75 (M)) M & L for one coat of spray painting with synthetic enarmel paint (1st quality) and obtaining optimum finished surface incluing preparation of old sarfaces complete all as spfecified and directed by Engr-in-charge. (Make:- Asian / Berge / Jenson & Nicholson / Shalimar.)

CHAIR CB STEEL WITH ARMS (Drg No. 6/29/2019- FD-75 (M)) Supply & fix flat iron stiffeners of 20X3 mm thick, two numbers in each seat and back shall be welded to frame of chair and applying one caotas directed by GE of required size complete. (Note:- Each stiffeners shall be measured as one unit. Make:- RINL/ SAIL / TISCO / Syam Steel / SPS Balaji.)

M & L for Plywood Top for Double Bunk of 12mm thick, BWR Grade, 7 Ply of size 1980x910mm and fixing with 6 No. Mild Steel Bolt, Nuts and Washer for Double Bunk including Removing worn out old unserviceable ply from Double Bunk, complete all as shown in Drawing / specified and as directed. (Drawing No. TP)

M & L for Removing Denting and Making Good Bends (if any), Re-fixing of Loose Shelves with Mild Steel Stay Hook (as required), preparing Old Painted/ Treated both Internal & External Surfaces of Locker Bed Side Steel by Removing Loose Paints and Providing Putty and Primer where required to obtain a Smooth Surface, applying a Coat of Synthetic Enamel Paint (Smoke Grey or Olive Green Colour as ordered) with Spray Painting Machine, complete all as specified and as directed. (Drawing No. FD-1029)

Taking out unserviceable Leg of locker steel and supply & fix leg with 16 gauge CRCA sheet made to shape and size as per the existing one including necessary welding complete all as specified and shown on drawing. (Note:- each leg shall be measured as one unit.) (Drawing No. FD-1029)

Supply & fix 75mm size MS hinges for locker steel made of 1.6mm thick MS sheet duly welded rivetting including taking out old unserviceable hinges complete all as specified and shown on drawing. (Make:- Crow / Everlite/ Godrej /Harrison/Mowjee/ Hardwin/ Doorset)

Material & labour for spray painting to steel surfaces of Rack steel with synthetic enarmel paint (1st quality) and obtaining optimum finished surface incluing preparation of old sarfaces complete all as spfecified and show on drawing. (Make:- Asian / Berge / Jenson & Nicholson / Shalimar.) (FD-106, FD-1038)

Taking out old unserviceable shelves of Rack steel and supply & fix new shelves made out of 1mm thic MS sheet and applying one coat of synthetic enameled paint (1st quality over a coat of red oxide zinc chrome primer after preparation of new surfaces complete all as specified and shown on drawing. (Note:- each shelves shall be measured as one unit.) (FD-106, FD-1038)

M/S BORAH BROTHERS

M/S A K BROTHERS

M H KHAN