Design, Detailed Engg, Supply,etc of 400/230-110kv AIS SS with ICTs (TANTRANSCO scope), Switchgears, ControlPanels, SAS, ControlRoom and Civil Works at Samugarengapuram on Total Turnkey under Package1 of GEC2 funded by MNRE and KFW

Schedule I (CIVIL)

Schedule II (SUPPLY)

Schedule III (ERECTION)

Total GST Amount (@ 18%)

Item Rate BoQ

BoQ_Ver4.0

Specification No: T-2372

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE - CIVIL (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Earth work excavation in hard stiff clay, stiff black cotton hard red earth,shales, muram, gravel, stoney earth and earth mixed with small size boulders in all soils with an initial lead, lift, etc., complete.

Earth work excavation in all classes of soil

Earthwork excavation in SDR not requiring blasting

Earthwork excavation in MR and DMR not requiring blasting

Earthwork excavation in hard rock requiring blasting.

Earth work excavation by Hard Rock by wedging cheselling

Providing PCC 1:3:6, using 40mm HBG metal for foundation including cost of all materials labour lead, lift etc complete.

Providing PCC 1:3:6, using 20mm HBG metal for foundation including cost of all materials labour lead, lift etc complete.

Supplying and filling M.sand for foundation and basement including watering and consolidation in15 cm layers including cost of sand all labour lead lift etc. complete

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement.

column upto basement

Column in Ground floor

column in First Floor

column in Second Floor

Grade beam/plinth beam

Tie beam @ GF level

Tie beam @ FF level

Tie beam @ SF level

Lintel @ ground floor

Lintel @ First Floor

Sunshade @ Ground Floor

Sunshade @ First Floor

cable duct/sump wall

RCC 1: 1.5 :3 mix using 12-20mm metal with formwork for 150mm thick roof slab, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement.

150 mm thick

Ground floor

First floor

Second Floor

100mm thick….GF

Deck slab 250mm thick

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) with formwork including all cost labour materials lead lift curing etc complet. But excluding cost of steel reinforcement (By using mixer machine and vibrator). For precast slab

PCC 1: 4 :8 mix using 40mm metal without formwork for flooring including cost of all materials, labour, lead, lift etc complete

RCC 1:2:4 mix using 12-20mmmetal without formwork for flooring including cost of all materials,labour,lead,lift etc complete

R.C.C 1:2:4,150 mm thick over M 10 grade concrete 100 mm thick using 12 to 20 mm metal including cost of materials leads and lifts etc.complete.

Providing steel reinforcement for RCC works including cost of steel rod, binding wire and placing in postion of the steel reinforcement all materials, lead and lift etc., complete.

Refilling the foundation pits of building,towers and equipments plinth etc with excavated earth other than sand in layers of 150mm thick, including charges for spreading watering, consolidation as per standard speclification and as directed by the Engineer at site including all labour charges lead and lifts etc., complete.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refiling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the building using termite 250ml for 5 lit of water etc complete.

Brick work in CM 1:3 using II class chamber burnt bricks for partition wall, including cost of all materials, all labour charges, lead, lift, etc. complete.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour lead lift etc., complete. super structure, including cost of all materials, all labour charges, lead, lift, etc. complete.

Ground floor

First Floor

Second Floor

Plastering with CM 1:3, 12mm thick for ceiling including cost of all materials labour lead lift etc., complete

Plastering with CM 1:5, 12mm thick for interior , exterior of walls including cost of all materials labour lead lift etc., complete

Plastering with CM 1:5, 12mm thick for exterior of walls with chicken mesh provisions including cost of all materials labour lead lift etc., complete

Providing wall putty including cost of materials,labour charges, scaffolding charges ,lead,lift etc complete

Painting 2 coats using white cement over one coat of priming coat for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc. complete.

Painting the inside walls with two coats of best quality interior emulsion of approved colour over a interior primer coat of all materials, etc., complete.

Painting the outside walls with two coats of ULTIMA paint over a white cement primer coat of approved colour and quality including cost of all matreials, lead and lift etc., complete.

Painting with 2 coats acid proof paint of approved colour over a priming coat of white cement for battery room including cost of all materials, labour, lead, lift etc complete for interior walls.

Painting with two coats of approved enamel paint over one coat of primer for all M.S door window ,gater etc. including cost of all materilas,labour, lead and lift etc. complete.

Flooring with approved acid proof tiles over cement mortor 1:3 20mm thick in floor including pointing with white cement finishing the joints flush pointing the surface etc complete.

Flooring with approved virtified of non slippery type tiles over cement mortor 1:3 20mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete( sample to be approved by Dept.Engineer)

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface, including cost of all materials, labour, lead, lift, etc. complete.

Providing Eurocon tiles for portico over C.M.1:3 20mm thick and pointed with shite cement including cvost of all materials labour lead lift etc complete

Flooring for staircase with granite slabs super fine polished with machine etc edges 18 to 20mm thick,including required edge to suitable for steps, inclluding cost of all materials ,labour etc complete. (Sample approved by Dept.Engineer)

Supplying and fixing in position of best quality teak wood hand rails using teak wood (75x50mm) scantling, 20mm square rod, flat of (40x6mm), varnishing, enamel painting, including cost of all materials, labour, lead, lift, T&P etc. complete as per the instructions of concerened Executive Engineer.

Supplying, fabricating and Fixing of Stainless Steel Handrails for staircase near wet riser using 50mm dia 304L GradeStainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor olishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Granolithic cement concrete M15 mix for floor finish 20 mm thick using stone chippings of 10 mm size and below.including cost of all materials, labour, lead, lift etc complete

Providing weathering course with 20mm size brick jelly concrete over roof slab with lime brick jelly 32:12.5, well beaten with wood beaters and giving rise to the required slab with 80mm average thickness and laying one course of pressed tiles of size 23x23x2cm embedded with cm 1:3, mixed with crude oil at 10% by weight of cement and pointed with the same oiled mortor including cost of lime, brick jelly, cement all materials, curing, labour, lead and lift etc., and including cost of material and labour for applying water proof component over the terrace as base coating etc., complete.

RR masonry in CM 1:5 mix using hard blue granite stone for foundation and wall in coursed pattern method including cost of all labour materials, lead lift curing etc complete.

Flush pointing with CM 1:3 mix for RR masonry including cost of materials, labour, lead, lift, curing, etc., complete

PCC 1:2:4 using 20mm HBG metal with form work including cost of materials ,labour, lead, lift,curing, etc., complete

Supply and fixing in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.20 x 2.10 m

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) doors fabricated of casement type (open) from the profile the size of outer frame 60mm x 55mm and shutter with aouter wall thickness of 2.40 mm .the door unit should be designed with all corner joint mitred and fusion welded profile are reinforcement with 25x24x25mm steel reniforced with thickness of 1 mm to have dimensionally stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74 mm. The profiles should have co-extruded seals. Hardware: All the hardwarenlikenfriction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter

M&F of steel door using 40x40x6 mm for outer frame 25x25x6mm for shutter frame with msflat 25x6mm 3 nos for panels with 12mm thick oneside laminated MDF duratuff exterior quality with bolts, bitumin washers, hinges locking etc., including cost of all materials.labour lead lifts etc complete. Steel door of size 1.0 x 2.20m (double leaf) as per drawing

Fabrication, supplying and fixing of MS angle framed window half glazed and half shutter using MS angle of size 35x35x5 mm for window frame and 25x25x5mm for shutter and MS flats 19x4 mm thick for window grill with locking arrangement including painting with two coats of enamal paint over one coat of red oxide paint including cost of all materilas, labour, lead, lift etc, complete.Steel window size 1.35 X 1.10 M with steel shutter

M & F in position of anodized aluminium glazed sliding window of size 1.20 x 1.50m as per ISS 1038-1958 (1245 ISS) using aluminium sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg / m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5.50mm thick sun cool glass panelling including cost of all materials, locking arrangements labour, lead, lift, etc., complete.(1.20 X 1.50m)

S & F of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete.

Supply and fixing in position of double leaf anodised aluminium glazed main door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with std.quality hydraulic floor spring, automatic door closure, rubber beedings, hinges, handle, etc., with 5.50mm thick sun cool glass, etc., complete. Double leaf main door 1.50 x 2.10 m

Supply and fixing in position of anodised aluminium glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 5.5mmtk. sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.20 x 2.10m

Providing 35mm thick factory made prelaminated ABS ( Acrolynitrile butadiene styrene) door shutter moulded indifferent design, consisting of all round frame made out of water proof solid foam PVC bar of sizr 20x32mm, reinforced by 32x32mm-2nos, for vertical made out of LVL laminated veneer lumber,core material of 32mm thick high density craft paper honey comb board, sand wiched on both sides with pre-laminated ABS sheet thickness of 1.5mm, PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges-3 nos., for each shutter and ISI make SS round lock complete for finished item of work,complete complying with standard specification. The door shutter and frame shouls be approved from the Execeutive Engineer before use on.

Supplying and fixing fire rated (two houres) door as approved make including cost of all materials lead, lift, etc.,complete as per standard specification.

Supplying and fixing of 20 mm thick granite slab for cup board,kitchen platform etc., including cost of all materials, labour, lead, lift, etc., complete

Supplying and fixing of Europian type water closet with flushing cistern of Neycer/Parry ware with P"" or "S" trap etc complete as directed by department Engineer at site

Supplying and fixing in position IWC ORISSA PAN of size 580X420mm colour glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc. complete.

Supplying and fixing in position white glazed Flat back urinal - Size 455 x 350mm of approved make and quality [Parryware -Aquaseal urinal or equivalent] and with PVC pipe connection [Kohinoor], 32mm PVC waste pipe [Kohinoor], 12/15mm GM wheel valve ISI, fixing the urinal to the valve with necessary TW plugs, brass screws etc, connecting to the water main including the cost of all materials abour, lead, lift, T&P etc. complete. as directed by department Engineer at site

Supplying and fixing of white glazed wash basin of approved size including mirror of size 24"x18" of approved quality Neycer/ Parry ware including cost of wash basin with pedestal, pillar cock fixing with rug bolt and nuts, 15mm dia PVC connecting hose and outlet using 40mm dia PVC waste pipe , CP valve, tap etc complete. as directed by department Engineer at site

Supplying and fixing in position 165 mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of all materials, labour, lead, lift, T&P, etc., complete

Supplying and filling with 40mm metal as per standard specification inlcuding all cost of materials lead lift etc complete for dispersion trench.

Supplying and fixing of 110mm dia PVC pipe of 3.65m height with cowl including all cost of materials lead lift etc complete.for septic tank

Supplying and fixing of 110 mm dia PVC down fall pipe pipe including all cost of materails lead lift etc complete.

Supplying and fixing 110mm dia PVC. Bend including cost of materials, lead lift, etc. Complete

Supplying and fixing 110mm dia Pvc TEE including cost of materials, labour lead lift, etc. Complete

Supplying and fixing 100x50mm PVC floor trap in bath room with one pvc door bend shoe of 50mm dia including cost of all materials, lead, lifts, labour, etc, complete.

Supply & fixing marble partition of 25 mm thick 600 mm wide and 1200 mm high including necessary cement mortar with white cement concrete for urinals as directed by department Engineer at site

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size (2 ft) and fixing the same over teak wood round block and soap tray (PVC) in bath room including cost of all materials lead lift labour etc complete as directed by department Engineer at site

Supplying and fixing in position of best quality mirror (22" x 16") with aluminium frame over wash basin including cost of all materials labour, lead, lift, etc. complete as directed by the engineer at site

Supplying and fixing of PVC shower and Nickle control valve complete

Supplying and fixing the paver block of 65 mm thick to the foot path of the operational switches inside the yard including the cost of all materials, leads, fixing charges, lifts etc., complete

Supplying and fixing in position of ready made PVC water tank 2000 litre capacity, Sintex or equivalent make including cost of cover, with opening for inlet, outlet & over flow pipe, Transporting and cost of all materials, labour, lead, lift, etc. complete.

Providing gypsum board false ceiling using 50mm thick including supplying and fixing of Gypsum board 12.5 mm thick using required size of Anodized Aluminium section, perforated gypsum board with all materials, labour, lift, T&Ps etc, including providing opening, out holes for fixing light and fan fittings wherever necsssary all including cost of all materials , leads, lift, etc., as directed by the Engineer in charge complete as per standard specification.

Providing inspection chamber with foundation concrete, BW 1:5,by using II class chamber burnt bricks and manhole cover including plastering with CM 1:3,12mm thick and all cost of materails lead lift etc complete.

0.45x0.45m size

0.60x0.60m size

Fabrication,Supplying and fixing in position of MS ladder using 50x50x6mm MS angle awidth 45cm including painting with two coat primer welding, cost of all materials, labour, lead and lift etc., complete.

Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [ Novanpan or Equivalent] and 5mm thick machine frosted float glass 9modi, saint gobine or Equivalent using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, liftT&P etc. complete as directed by department Engineer at site

Providing and fixing of SS heavy duty long body tap of 15mm size including cost of all materials, labour, etc., complete.

Supplying ,laying and fixing in position of PVC pipe of best quality from approved manufacturer confirming to IS 4985-1968, 4984-1970 including cutting threading joining with necessary PVC specials including cost of all materials lead lift labour etc complete. as directed by department Engineer at site

40mm dia pipe

32mm dia pipe

25mm dia pipe

20mm dia pipe

15mm dia pipe

Supplying and fixing approved make and quality gun metal wheel valve including cost of all materials labour lead and lift etc, complete in all respects.

40mm dia

32mm dia

25mm dia

20mm dia

Supply furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer

S Type chair (Local rate)

Three drawer steel table

Steel side rack open type 4 shelf

Steel half bench

Revolving Chair

Operator Table 6'x5'

PVC armed Chair of reputed make

Fabrication & erection of Name Board of vinyal sticker laminated in alco panel using 18 gauge M.S. sheet with outer in suitable angle and stiffener at the rear side of MS flat

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick (gareware or equivalent )including the cost of all materials, labour, lead, lift, T&P, etc. Complete.

Supplying and sticking the name / designation stickers in doors identifying the rooms including cost of material, labour etc. complete.

Providing locking arrangements with 6 lever Godrej lock with 3 keys including cost of all materials, labour, lead and lift etc., complete.

Providing shoring and shuttering using CW planks and scantlings including cost of all materials labour lead lift etc. complete

Dewatering during the earthwork excavation including cost of all material,labour, lead, lift etc.,

Removal of surplus earth wherever necessary including transport up to 2 km away from the site, loading and unloading etc., complete

Supplying, laying of 50mm dia10 kg/cm2 PVC pipe with required PVC bend L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc., complete as directed by the department engineer at site.

Providing opening for cable,AC duct / water pipe line etc in brick work/RCC in building and retaining wall& cable duct including cost of machinaries labour etc complete as directed by dept engineer at site.

Brick wall

RCC work

RR wall

Providing projected border of 7.50cm width on top of wall in CM 1:3, 12mm thick including cost of all material labour, lead, lift, curing etc., complete.

Providing projected border of 20cm width for plinth beam in CM 1:3 mix 20mm thick including cost all materials lead lift curing etc complete.

Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing musical quartz type Wall Clock of size 30 x30 cm of approved quality such as Ajantha / Seiko/ Citizen etc including transport, fixing charges etc complete.

Design, Engineering of control room building and Kisok room foundation including soil investigation,prepartion of contour layput, design calculation for analysis of entire control room, Kisok room building foundation etc as per technical specification and relevant latest IS ( 10 sets of Design and Drawings with soft copy) drawing complete

Design of 400/230-110 KV SS structure plinths, transformer plinth and all allied equipment plinths etc., including design calculations, detailed drawings etc., as per technical specification and relevant latest IS ( 10 sets of Design and Drawings with soft copy)

Supplying and laying 15 mm dia 10 kg PVC pipe of approved quality for AC unit water drain pipe including cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and fixing 5/8" copper tube for connecting AC panel to AC out door unit including cost of all materials, lead, lift, labour charge, etc., complete.

Laying fixing if Controflex (silicagel) compound in around ventilator for protection of rain water.

Forming vertical joint in RC columns with premoulded asphaltic pads 20mm thick to full width of columns and providing aluminium cover strips of required size on both sides of the joints for interior column including the cost of all materials, labour, lead, lift, T&P etc. complete

Forming expansion joints in roof slab with 18 gauge GI sheets as per 2B plan W.No 2/41 revised TNBP specification

Forming expansion joints in floor slab with 16 gauge GI sheets as per revised TNBP specification

Supplying and fixing rolling shutter electrically operated with gear box crank handle top cover of 18 gauge thick MS sheet anchoring rod, hasp & shackle to details including labour and materials for providing pockets to guides of rolling shutters making necessary holes in masonry or concrete 1:2:4 and making good, including one shop coat of anit-corrosive primer erectd in position (size 2500x2500mm) with high tension coils, type spring arrangements.

Supplying & fixing of chequred plate & MS Channel and MS angle for seating control panel, including cost of all materials, cutting the channel to the required length and welding grip rods for the rails,transport charges,labour for fixing and handling etc.,complete.

Supplying of 10 gauge best quality GI barbed wire 2 ply 4 barb conform to IS 278 of IOWA and labour charges for tensioning of barbed wire as per 2 x 4 rows horizontally including cost of GI barbed wire, GI binding wire with all labour lead lift etc complete.

Supplying and fixing in position of MS oranamantal grill gate with wicket gate with the provision of hook arrangements holdfast including cost of all materials, transporting, labour charges, welding charges, cutting charges, drilling holes with provision of MS bolt, nut and washers of required sizes for holding chain link fencing, 1 coat of primer of approved quality and colour, enamel painting with two coats, all leads and lifts etc., complete and placing in position as per the specification and drawings and as directed by Engineer.

Supplying and fixing of G.I.50x50x6mm angle @ 75cm c/c for supporting tray in cable duct including cost of materials fixing them in position, labour lead etc complete

MS flat 0.15mm width,8mm thick with anchorage and welded with duct wall reinforcement and epoxy paint coating for non corrosive protection which is embedded at cable duct side wall @ 75cm c/c including cost of materials ,labour ,lead ,lift ect complete

Providing weep holes including cost of 40mm pvc pipes fixing them in position etc complete

Drilling suitable holes using power drilling drilling machine to the required depth to fix the angle without disturbing the strength of the concrete icluding hire charges for drilling machine cable lead lift etc complete.

Providing and laying in position of pvc pipes from equipment to duct including earth work excavation laying pipe ,cost of pipe, coupling, elbow, bend transport charges lead lift etc complete

110mm dia PVC pipe

165mm dia PVC pipe

Supplying and fixing in position of GI 50x50x6mm angle in Y shape fixed in the boundary RCC column including cost of all materials, labour for painting , cost of paint,lead,lift etc, as per drawing with proper locking arrangements etc., complete.

Supply,fabrication and fixing in position of MS Grill using 20sqmm rod fixing over wall including painting with two coat primer welding, cost of all materials, labour, lead and lift etc., complete.

Filling the yard with hill earth including cost of all material, labour, lead, lift etc complete

Cutting and sectioning the existing surface and filling in the low laying area including cost of cutting the gravelly soil/soft disintegrated rock with JCB/other earth moving machineries, consolidation as per standard specifications and consolidation with power rollers including all labour, hire charges for machineries etc., complete.

Engraving the name of Substation over entance wing wall in both Tamil and English using cement plastering and providing borders, colouring with emulsion paints etc., including cost of all material, labour, lead, lift etc., complete

Clearing the site including removing the vegetation & levelling etc complete.

Supply and erection of 2HP Monoblock pump for sump to drainout water including cost of suitable GI Suction and delievery pipes ,cover for motor, wiring, all cost lead and lift etc complete.

Labour charges for transporting from casting yard to curing tank,curing tank to cable duct, aligning and laying of RCC pre cast slab in various sizes as directed by the site engineer including all labour lead lifts etc complete

Providing Precast curb stone with PCC 1:2:4,20mm metal and fixing along the road side including earthwork excavation, materials, labour etc complete

Labour charges for transporting aligning and fixing of Precast curb stone slab along the road side as directed by the site engineer including all labour for earth work excavation, lead, lift and refilling the trench etc complete

Supply and laying of 50mm dia GI Pipe B class including cost of materals labour, lead and lift etc. complete.

Supplying and fixing of 20mm dia GI B class pipe suitably bend with both ends with necessary angle iron upright and end supports for main.

Supplying and filling with stone dust for 400/230-110 yard portion as per site engineer including cost of material lead lift ,etc,complete.

Supplying and Spreading machine broken 25mm HBG metal including 400/230-110Kv yard portion as per site engineer including cost of material lead lift, etc,complete.

Providing PVC end cap for water line pipes for earthpits for dripping arrangemnets of water supplyincluding cost of materials and fixing them in position etc complete

15mm dia

20mm dia

Supplying and fixing readymade RCC earth collars of size 60 cm inner dia with 45 cm height and shell thickness of 50 mm with cover slab including cost of all materials, transport to site, labour, lead, lift, etc., complete as per standard specification.

Providing of Granular Sub base using Grade I materials of table 400 - 1 of Morth with minimum CBR spreading in uniform layers with motor grader on prepared surface, mix in by place method at OMC and compacting with Vibratory Roller to achieve the desired density including all Labour charges etc, complete as per technical specification and as directed by the departmentals.

Wet mix Macadam (Table 400-13) Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mchanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to ahcieve the desired density complete as per clause 406 of MORTH VTh Revision specification No 111, 112, 406 & 900

Providing and laying tack coat of 4 kg bitumen for 10 m2 and including cost of bitumen which will be arranged by the contractor at including heating the bitumen with bitumen boiler including labour charges for preparing the surfacce for laying quantity of bitumen and fuel cost including hire charges for bitumen boiler all T & P etc. completed,

Providing and laying Bitumen macadam of 50 mm thick clean course aggregate 26.50 mm to 11.20 IRC size metal at the rate of 0.42m3 for 10m2 fo each layer with application of bitumen at the rate of 38 kg per 10 m2 over each layer spreading the lay aggregate at size 11.20 - 2.80 mm @ .10 m3 and 2.80 mm @ .18 m3 per 10 m2the as per specifiaction and application of bitumen and consoildation of each layer by power roller including conveyence at all materials to departmental gauge for premeasurenet including conveyance cost of bitumen handing charges for the same at both labour far spreading the metal packing camber and grade including labour for heating bitumen to required temperature all hire charges fuel charges for power roller bitumen sprayer all T & P including lead lift etc completed.

Bituminous concrete (Table 500-17) providing and laying bituminous macadam with hot mix plant using crushed aggregate of specified grading permixed with bituminous binder (Viscosity grade 30), at precentage specified by Job mix formula of mix and filler transporting the hot mix to work site, laying over a previously prepared surface with paver finisher to the required grade level and alignment and rolled as per clause 501.6 and 501.7 to achieve the desired compaction complete as per clause 507 of MORTH Vth Revision specification - Grading II Specification No 111,112,501,507 & 900

Providing and laying pre mix carpet wirth seal coat for 20 mm ( consolidated ) using 0.18 cum of 13.20 mm and 0.09 cum of 11.20 IRC metal with 14.6 Kg of bitumen for pre -mixing 10 sq m of premix carpet and .09 cum of 6 mm IRC metal 9.80 Kg of bitumen for seal coat including charges for conveyance of metal to work site and stacking them to departemental metric gague for premeasurement including cost of bitumen conveyance to site including mixing the materials in mini hot mix plant for premix carpet spreading including hire chares for hot mix plant, all other tools and plants etc.

Supplying and spreading of good quality of gravel for forming of side berms on either side 60cm wide of road with spreading of garvel to 175mm thick and ramming including including cost of gravel,compaction ,labour,lead,and lift etc,complete.

Providing of RCC Heavy duty pipe (NP3) confirming to IS 458/2003 across road crossing including cost of collar pipe as directed by department engineer at site for cable crossing and storm water drainage including all materials leads and lift etc ,complete.

600 mm dia

800 mm dia

300mm dia

150mm dia

Supplying and fixing of RCC jolly of size 0.6x0.45 including the cost of all materials,lead,lift etc.,complete.

Drilling of 2nos, 150 mm dia each deep Bore well in all classes of soil including hard rock, charges for inserting casing pipe assembling in the drilled bore holes welding the casing pipe etc transporting to the site and supporting charge for the site and place to place etc. complete.

Supply and delivery of 165 mm dia PVC 6 Kg /cm2 Casing pipe as per ISI Standard Specifications and as directed by department Engineers at Site.

Labour charges for inserting 165 mm dia PVC casing pipe assembly in the drilled bore holes including jointing the PVC pipe with the PVC Coupler with cement paste etc., complete

Supplying & fixing of 40mm dia. U- PVC Heavy duty pipe with RED COLOUR MARK of equivalent ISI make for suction inside the borewell with supporting clamp including cost of all materials, labour, lead & lift etc., complete as driected by the department engineer at site.

Supplying & wiring with 2x4 Sq.mm.flat type submersible cable of make FINOLEX, V-GUARD or other approved ISI make for connecting the submersible motor and to the panel board and clamping with the PVC pipe with suitable clamps inside the borwell including cost of all materials, labour, lead & lift etc., complete as directed by the department engineer at site.

Supplying and laying 20mm dia pipe for air pipe connecting borewell to motor including earthwork excavation, refilling necessary fittings, all materials, labour, lead and lift etc., complete as directed by the department engineer at site.

Supplying and erection of three phase 5 HP Compressor multi-stage (30-40 stage) electrical motor and pump of approved ISI brand with non-return valve, adoptor, nylon rope and all related accessories as per IsI in all respect including necessary switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make panel board with Amp. & Volt meters with guard and providing earthing to main with no. 8 tinned copper rod and 6' long 40mm dia GI pipe for earting and earth pit filled with charcoal and salt as per standard spectification labour charge for erection of submersible pump and motor including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Fixing of bore well by well qualified geologist including T&P, labour, lead, lift, etc., complete

Supply,Fabrication and Assembling of MS template for fixing the foundaion bolts for all voltage level towers for 400KV,230KV and 110 KV and respective equipment in position aligning, levelling with arrangements of hold the bolts as per drawing in the concrete pedestals including cost of materials,labour, transport ,lead,lift etc complete.

For Towers and ligtning mast

For equipments

Supplying,Fabricating,galvanising of GI foundation bolts of various size with 2 Nos GI nuts with proper anchorage for all towers and equipments as per drawing including cost of materials,labour,lead lift etc.complete

For Towers and ligtning mast

For equipments

Providing Pocket holes of size 150x150 with deep deep for breakers including material, labour with proper alignment,lead,lift etc complete.

Erection of GI tower angles and structurs for various voltage level of 400 KV,230Kv and 110 KV as per approved drawing and as per the specificaion at site including labour,shorting out, transport,drilling holes wherever required,lead,lift ete.complete.

Supplying, transporting fabrication, fixing Labour charges for fixing of appd quality of MS Rails (90 LBS) for transformer plinth including in proper alignment and interconnections the Steel of rails with flat on both ends by welding including cost of rail, all materials labour charges, lead, lift etc. complete, as per standard specification

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (SD 58)

Wiring with 2x1.5 sq.mm PVC insulated single core copper multi strand fire retardent flexible cable 1100 v grade in suitable PVC rigd pipe on wall and ceiling with reputed make switch boxes earthwire connection in 14 SWG TC wire for light point / Fan point including cost of wire, labour lead etc. complete.of approved quality

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.

Supply and run of 2 x 1.5 sqmm (22/0.3) PVC insulated MC unsheathed SC copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

wiring with 2 x 4 sqmm (56x0.3) PVC insulated single core unsheathed copper cable 1100 v grade in suitable PVC rigd pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150x100x113 mm TW Swich box with 3mm thick hylem sheet for 15 A 3 PIN non interlocking CS plug with continuous earth wire 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work etc. complete.

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only. (SD 158)

Supply and fixing of 4'x40 W single type fitting (Philips /Crompton / Wipro) complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with LED tubes.

Supply and fixing of 4'x28 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with LED tubes.

Supply and fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for LED lamp with guard and 1No 36 W LED bulb.

Supply and fixing of 18 W LED for BH point.

Supplying and fixing of 1200mm sweep AC ceiling fan with electronic requlator with 300mm down rod on the existing clamps of approved quality of Crompton/Rally/ usha/bajaj including cost of all materials lead lift etc complete.

Supply and fixing of 450 mm (18") sweep (heavy duty) AC exhaust fan complete with louvered covering arrangements with necessary wall opening and making good of the wall.

Supply and fixing of 375 mm (15") sweep (heavy duty) AC exhaust fan complete with louvered covering arrangements with necessary wall opening and making good of the wall.

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make). (SD 173)

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make]. (SD 134-B)

Supplying, Fixing of buzzers with 5A bell push switch etc complete.

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work. (SD 228)

Supplying and fixing of split Air Conditioner (3 phase -2 Ton capacity) of approved make (Dikin or equivalent) and 5 star rated with all accessories including stabilizer( V guard) with reputed make including cost of all materials, leads, lift, fixing charges, etc., complete as per standared specification complete.

Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work,with earth connections.

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Supply and fixing of LED indoor fitting with 24W LED 4000K 2X2 Square type recessed fitting matched with false ceiling with PVC unsheathed copper leads from the terminals to the fitting with LED

Supplying and erecting in position of 50 liters capacity Industrial Model Reverse Osmosis water -cum-Purifier to deliver portable water with World Health Organisation (WHO) standards with following accessories. (a) MS Skid - 1 No. (b)Media 11054 No. Vessel with 20 nb multiport valve (with Media Pubble and Fine Sand and Activated Carbon Filling ) set (c)Feed Pump 0.50 HP - 1 No. (d)Vertical Pump 2-9, 2.00 HP/Single Phase - 1 No. (e)Membrane 40x40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessal 40x40 - 1 No. & Pressure Gauge - 2 Nos. (f)Flow Meter - 1 No. 20" Filter with housing -1No, Low Pressure Switch - 1 No, Level Switch - 1No & Necessary CPVC Pipes and fittings. The system shall be provide with Two Panel Control System with necessary stainless valves and fittings and float control etc. The rate should be inclusive of all civil works, wherever necessary to install the system in position and intact.

Supply of NIKON Prostaff 3S 10x42 Binocular with Ultaviolet radiation protection and anti reflection coated optics

Providing gardening arrangement, including cost of turf plants, fertail soil, manur and labour charges of turfing, planting, excavation, filling, watering for onemonth etc., complete as directed by the Engineer incharge.

Hire charges for JCB for levelling the site and uprooting and removing eucalyphtus / palmyrah stumps including cost of hire charges, fuel charges, all labour lead and lift etc., complete as per standard specification.

Providing groutong with M20 concrete mix for tower and equipment base plate with 3 to 6mm HBG chips and FOSRAX chemical compound at a depth of 20cm over concrete plinth including cost of all materials, labour, lead, lift etc complete

Supply of GI angles for towers and structurs for various voltage level of 400 KV,230Kv and 110 KV as per approved drawing and as per the specificaion at site including labour,shorting out, transport,drilling holes wherever required,lead,lift ete.complete.

Supply of GI Bolt and nuts with washers for erection of towers and structurs for various voltage level of 400 KV,230Kv and 110 KV as per approved drawing and as per the specificaion at site including labour,shorting out, transport,drilling holes wherever required,lead,lift ete.complete.

Providing and fixing of Aluminium Composite Panel (ACP) 4sided having 50x25x1.50mm framework vertical and horizontals out of specially designed extruded sections stand nd pressure of 180Kg/sq.m and fabricated fixed at all level elevation and heights.The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming Tis– 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant d backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the site Engineer

Item Rate BoQ

BoQ_Ver4.0

Specification No: T-2372

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE - SUPPLY (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

420 KV, 3150 A, 63 KA, SF 6 Circiut Breaker 220 V DC Control (without pre insertion resister) with Control switching device. (CSD) and all accessories, Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

420 KV, 3150 A, 63 KA, SF 6 Circiut Breaker 220 V DC Control without pre insertion resister and all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

245 KV, 2000 A, 50 KA, SF 6 Circiut Breaker 220 V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

145 KV, 2000 A, 40 KA, SF 6 Circiut Breaker 220 V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

420 KV, 3000 A, 63 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 3000-2000-1000-/1A) with Terminal Connectors and clamps, G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CT's)

245 KV, 2000 A, 50 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-800-/1A) with Terminal Connectors and clamps.G I Tubular Mounting Structure, Hot Dip Galvanising Steel Foundation Bolt (1 No.Junction Box for 3Nos CT's)

145 KV, 2000 A, 40 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-800/1A) with Terminal Connectors and clamps, G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CT's)

420 KV, 200 VA, 400KV/√3/110 V /√3, Capacitive Voltage Transformer with Terminal Connectors and clamps, G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CVT's)

245 KV, 200 VA, 230KV/√3/110 V /√3, 50KA Line Voltage Transformer with Terminal Connectors and clamps G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos LVT)

145 KV, 200 VA, 110KV/√3/110 V /√3, Line VoltageTransformer with Terminal Connectors and clamps, G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for each LVT)

245 KV, 200 VA, 50KA 230KV/√3/110 V /√3, Potential Transformer with Terminal Connectors and clamps,G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos PT)

145 KV, 200 VA, 110KV/√3/110 V /√3, Potential Transformer with Terminal Connectors and clamps, G I Tubular Mounting Structure ,Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos PT)

390 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories, G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt

216 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt

96 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal onnectors and clamps and all accessories G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt

420 KV, 3150 A, 63 KA, Horizontal Centre Rotating double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 3Nos MOMD for Main Blade and 3 Nos MOMD for earth switch with G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

420 KV, 3150 A, 63 KA, Horizontal Centre Rotating double Break with Double earth switch- 440 V AC Motor operated with 220 V DC Control, 3Nos MOMD for Main Blade and 6 Nos MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade and 1 No MOMD for earth switch with G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with out earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade with G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with out earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade for higher elevation.

145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade and 1 No MOMD for earth switch including G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

145 KV,2000 A, 40 KA, Horizontal Centre Rotating Double Break without earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade. including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

145 KV,2000 A, 40 KA, Horizontal Centre Rotating Double Break without earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade for higher elevation.

420 KV, 3150 A, 63 KA, Vertical operated single Break Bus earth switch- 440 V AC Motor operated with 220 V DC Control, 1Nos MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt.

245 KV, 2000 A, 50 KA, Vertical operated single Break Bus earth switch- 440 V AC Motor operated with 220 V DC Control, 1Nos MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt.

145 KV, 2000 A, 40 KA, Vertical operated single Break Bus earth switch- 440 V AC Motor operated with 220 V DC Control, 1Nos MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt.

420 KV, Solid core Insulator with Corona ring G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps.

245 KV, Solid core Insulator G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps.

145 KV, Solid core Insulator G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps

LT 433 V, AC Distribution Board with MCB's with LT Circuit Breaker Control and Change over switch for 400 KV SS

800A AC change over switch

220V DC Distribution board with MCBs, with one control Panel each for change over arrangement of Charger supply

200 A DC change over switch with panel (1 panel for 4 Switches)

Out door 433 V AC Distribution Cubic with 20 Nos, 32 A MCB's and 10 Nos, 16 A MCB's, with weather proof stainless steel cabinet for all equipmnets/ Isolators.

Outdoor 433 V AC Distribution Cubic with 1 No, 200 A MCB's and 10 Nos, 32 A MCB's, with weather proof stainless steel cabinet for ICT's

Outdoor 220 V DC Distribution Cubic with 30 Nos, 32 A MCB's with weather proof stainless steel cabinet for all equipmnets/ Isolators/ICT's .

Outdoor 433 V AC Distribution Cubic with 10 Nos, 32 A MCB's with weather proof stainless steel cabinet for LLM .

220 V DC, 400 AH, Station battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

220 V, 80 A Float, float cum Boost Battery Charger with Change over switch.(FC+FCBC)

220 V DC, 300 AH, Station battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

220 V, 60 A Float / Float cum Boost Battery Charger with Change over switch.(FC+FCBC)

48V DCDB with MCB's, DC Change over switch, neccessary cabling for 48 V DC Charger and 48 V DC Batteries

48 V DC, 600 AH, battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

48 V, 120 A Float , float cum Boost Battery Charger with Change over switch.(FC+FCBC)

400KV Bus bar protection Panel

Synchronising cum Islanding Panel for 400KV Bays

Control & protection Panel for 400kv Line

Control & protection Panel for 400kv Tie breaker bay

Control & protection Panel for 400/230 KV ICT (Both HV & LV Panel)

Control & protection Panel for 400/110 KV ICT (Both HV & LV Panel)

230KV Bus bar protection Panel

Synchronising cum Islanding Panel for 230KV Bays

Control & protection Panel for 230kv Line /Feeder

Control & protection Panel for 230kv Transfer bus coupler bay

Synchronising cum Islanding Panel for 110KV Bays

Control & protection Panel for 110kv Line /Feeder

Control & protection Panel for 110kv Transfer bus coupler bay

110KV Bus bar protection Panel

Sub station Automation system for 400KV/230kv-110KV SS for 28 bays ( 12nos 400KV Bays, 7nos 230KV Bays, 9nos 110KV Bays )

Outdoor armoured 24Core FO Cable for connectivity of all kiosks with the SAS LAN and with station Auxiliary systems including all FODPs.

Supply of Visual monitoring system as per specification

Spares for Control & protection panels and for SAS :

Bay control Unit for 400 KV (BCU shall be equipped with maxi-mum configuration stipulated among 400 kV Bays application.)

Numerical Main-1 Line distance protection relay suitable for 400 kV feeder

Numerical Main-2 Line distance protection relay suitable for 400 kV feeder

Numerical relay for 400/230 kV ICT for Group-A protection. (One set comprises all of the numerical relays for implementing Group-A protection. )

Numerical relay for 400 /230 kV ICT for Group-B protection. (One set comprises all of the numerical relays for implementing Group-B protection. )

Numerical protection relay for 400KV Tie breaker

Spares for Numerical relay for 400 kV bus bar protection (Each set comprises 1No bay unit, 1No central unit and accessories)

Numerical Main-1 Line protection relay suitable for 230 kV feeder

Numerical Main-2 Line protection relay suitable for 230 kV feeder

Spares for Numerical relay for 230 kV bus bar protection (Each set comprises 1No bay unit, 1No central unit and accessories)

Bay control Unit for 230 KV (BCU shall be equipped with maxi-mum configuration stipulated among 230 kV Bays application.)

Numerical Main Line protection relay suitable for 110 kV feeder

Numerical backup Line protection relay suitable for 110 kV feeder

Bay control Unit for 110 KV (BCU shall be equipped with maxi-mum configuration stipulated among 230 kV Bays application.)

Spares for Numerical relay for 230 kV bus bar protection (Each set comprises 1No bay unit, 1No central unit and accessories)

Ethernet switch for one 400 kV diameter with 50% spare ports

Ethernet switch for one 230 kV kiosk with 50% spare ports

Ethernet switch for one 110 kV kiosk with 50% spare ports

Ethernet switch for Control room plus 50% spare ports

Electronic Trivector meter (ABT) (As stipulated for relay panel)

Master tripping relay (86) (As stipulated for relay panel)

Master tripping relay for bus bar application (96) (As stipulated for relay panel)

TNC Switch (As stipulated for relay panel)

D.C. supply supervision relay (As stipulated for relay panel)

Trip circuit supervision relay (As stipulated for relay panel)

Single phase trip relay (with self-reset contacts) (As stipulated for relay panel)

Auxiliary relays (Electromechanical type) not covered elsewhere in spares list. (One set comprised all of the each type of auxiliary relay As stipulated for relay panel)

LEDs of each type (As stipulated for relay panel)

Passive devices for relay panel not covered elsewhere in spares list. (Isolation links etc)

Standard accessories for relay panel not covered elsewhere in spares list. (Each set Comprises MCBs, Contac-tors, Thermostat etc.)

Hard disk for HMI server (As stipulated for relay panel)

Spares for GPS equipment (One set comprised Each type of Hardware Modules for GPS device.)

Spares for Inverter for SAS (Includes all necessary spares for maintenance of Inverter for 5 years. Must include Electronic modules each type, cooling fan, Fuse, MCB, IGBT etc.)

Line interface unit for SAS FO LAN for one diameter (Complete with FO patch cable.)

Media converter (One set comprised Each type of media converter used in the SAS and Control & protection panels.)

Spare Diode/ Link for Islanding panel application

Latest version of KVM extender cable (for HMI server)

FO Patch cable of sufficient length for interface between Relay to Ethernet switch

Transducer ( One set comprises 1 no of each type of Transducer)

Spares for Auxiliary BCU/IED for monitoring of station auxiliaries (1 set comprises all of each module type.)

Push Button reset switches for Master and 96 Bus bar trip relay

Scientific Instruments True RMS Digital Multimeter Fluke 87V/Equivalent Advanced Model

Digital Mini Clamp Meter(for mA current measurement range 20mA - 200mA - 2 - 20A) Fluke 369 with all standard accessories, functions and features enabled

Handheld Digital Clamp Meter (True RMS AC/DC currents upto 2000 A) (Fluke 355 True RMS Clamp Meter 2000A AC/DC)

Hand held Insulation Tester (1KV with R Measurement) (Rechargeable battery operated) Megger MIT 320 with all standard accessories, features and functions enabled

10 kV Digital Insulation Tester (Rechargeable battery operated) Megger S1- 1068 with all features and functions enabled / Equivalent Advanced model

Fully Automatic Capacitance & Tan Delta Measurement Kit Advanced model of Omicron/Megger make with all functions and features enabled

Computerized Relay Testing Kit with advanced package and Latest laptop (Omicron make CMC-356 essential package + Advanced Distance +Differential + Advanced Transplay + GOOSE + OCC + OC IDMT & Dir Element module + Trasnducer testing option + 3 years warranty + Laptop + CMGPS588+ 400 PTL templates to test automatic testing + PTP Time synch option + Transport casing – Rugged hard carry case with trolley.

Digital Earth Resistance clamp on Meter (Megger DET14C or equivalent advanced model)

Thermo vision Camera (IR Cameras with the resolution of 640x480 pixels like FLIR Model T820 or equivalent Models with Laptop)

Circuit Breaker Analyzer Multi break kit with DCRM and laptop computer M/s.Scope make HISAC ULTIMA + 6 Channel DCRM with all features and functions enabled for testing 400kV SS Breakers

Optical Time Domain Reflecto Meter (OTDR) (YOKOGAWA AQ1215E with OPM & VLS Port enabled)

Optical splicing Kit Fujikura FSM 88S

Optical Source Meter VIAVI OLS 36V2 Equivalent Model in EXFO

Optical Power Meter VIAVI OLP 35SC/Equivalent Model in EXFO

Ferruling Machine letawin LM550A/PC with all spares and standard accessories

Communication equipments :

Hybrid type Optical Line Terminal Equipment/(FOTE) (SDH,PDH & MPLS-TP) (2 Nos. for Samugarengapuram 400kV SS and 1 no for S.R Pudur 230kV SS).

Digital Protection Coupler (4 Nos. for Samugarengapuram 400kV SS,2nos for S.R Pudur 230kV SS, 2 nos for Muppandal 230kV SS, 2 nos for Nanguneri 230kV SS)

Hybrid EPAX (16S/16T) (Analog, Digital & VOIP)

VOIP Telephones with CAT6 shielded Cable, necessary gateway , ethernet switches and other accessories(2 Nos. for Samugarengapuram 400kV SS[ 4 Nos for 400kV Kiosk, 3 Nos for 230kV Kiosk, 3Nos for 110kV Kiosk],2 nos for S.R Pudur 230kV SS with Gateway)

Mandatory Spares and tools for Hybrid FOTE equipment as per specification

Mandatory Spares and tools for Digital Protection Coupler as per specification

Supply of Standalone Rack Panel for accommodating 4 nosFibre optic 1" Rack with 4x19" rack provision 2000X800X800 mm with mm Thichkness and necessary fibre entry provision.

T&P Furniture

PC & Software

LED Bulb (20Watts of Higher) for emergency lighting of Control Room)

Armoured Copper Control Cable 8CX 4mm2

Armoured Copper Control Cable 4CX4mm2

Armoured Copper Cable 4CX16mm2

Armoured Copper Cable 2CX16mm2

Armoured Copper Control Cable 28 C X 2.5mm2

Armoured Copper Control Cable 14 C X 2.5mm2

Armoured Copper Control Cable 20C X 2.5mm2

Armoure Copper Control Cable 4C X 2.5mm2

Armoured Copper Control Cable 8CX 2.5mm2

Armoured Copper Control Cable 2CX2.5mm2

LT Power cable 4C x 120 sq.mm AL

LT Power cable 4C x 240 sq.mm AL

LT Power cable 4C x 25 sq.mm AL

LT Power cable 2C x 16 sq.mm AL

Armoured Fibre Optic Cable 48 Core (For communication equipment)

Armoured Copper Cable 2x35mm2

Gland and End connectors forOptic Fibre Cables

Cable Gland of Various size

Copper sockets of various sizes for wiring termination with necessary PVC sleeves, cable tie etc.,

11 KV , 160 KN Anti fog Strain Disc Insulator

11 KV ,120 KN Anti fog Strain Disc Insulator

100mm Dia Aluminium Bus Bar with welding sleeve

75mm Dia Aluminium Bus Bar with welding sleeve

ACSR Moose Conductor

Electrical Insulation Anti skid Rubber mat 2000X1000X13mm

Trolley Mounted adjustable Telescopic GI Ladder 45 feet Height

Aluminium Ladder 8 Mtrs Length

Aluminium Ladder 4 Mtrs Length

Discharge rod made of hard PVC,copper flat and 6sq.mm cable

Earth Rod made of hard PVC,copper flat and 6 sq.mm cable

First Aid Box and Artificial Respiration kit as required.

Digital clock for GPS Time calibration

Portable Emergency Lamp-Rechargable Type

Emergency lampwall mounted with Battery backup

GI Ladder type Cable Tray 2.5m L, 0.3m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.45m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.60m W and 2mm thickness with coupling plate and bolt nuts

Steel Bolt and Nut,Spring Washer and Flat washer of reputed make of various size for use to all power connectors

Red oxide Paint of reputed make for painting of all EarthRaisers and MS materials

Aluminium Paint wherever necessary

Anti Corrossive black paint of reputed make for painting of all joints in Earth Raiser connections and Earth mats

Enamel Paint of reputed make of various colours for colour coding painting of Bottom of all structures,equipments and name boards as per field requirement

Reflector sticker of reputed make for colour coding of all equipments and structures

T clamp to suit Twin MOOSE ACSR on all ways with 450mm sub-conductor spacing

T clamp to suit Twin MOOSE on main ways with 450mm sub-conductor spacing and single MOOSE on branch way

T clamp to suit Twin Moose on main way with 450mm sub-conductor spacing and Twin Moose ACSR on branch way with 450mm sub-conductor spacing

T clamp to suit 4" IPS Al. tube on Main way and Quad MOOSE on Branch way with 450mm sub-conductor spacing

T clamp to suit 4" IPS Al. tube on Main way and Twin MOOSE on Branch way with 450mm sub-conductor spacing

Corona Bell to suit 4" IPS Al. tube

420kV Bolted type Double Tension String assembly suitable for 25 no.Anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, with double anchoring, corona ring, and tension clamp set suitable for Twin MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no.Anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, with double anchoring, corona ring, and tension clamp set suitable for Twin MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Single Suspension String assembly suitable for 25 no. Anti fog type disc insulator of 120kN, with Drop Clamp and its associated hardware accessories suitable for Twin MOOSE ACSR with 450mm Sub Conductor spacing.

420kV Bolted type Single Suspension String assembly suitable for 25 no. Anti fog type disc insulator of 120kN, with Drop Clamp and its associated hardware accessories suitable for Quad MOOSE ACSR with 450mm Sub Conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no. Anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, with double anchoring, corona ring, arcing horn and tension clamp set suitable for 4 x MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no. Anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, with double anchoring, corona ring, arcing horn and tension clamp set suitable for 4 x MOOSE ACSR bundle with 450mm Sub conductor spacing.

Rigid Spacers to suit 2 x MOOSE ACSR Conductor with 450mm sub conductor spacing.

Rigid Spacers to suit 4 x MOOSE ACSR Conductor with 450mm sub conductor spacing.

T clamp to suit 2 x MOOSE ACSR on all ways with 225mm sub conductor spacing

T clamp to suit 2 x MOOSE ACSR on main way with 225 sub-conductor spacing and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

T clamp to suit 2 x MOOSE on main way with 225mm sub-conductor spacing and 1 x MOOSE ACSR on branch way.

T clamp to suit 3" IPS Al. tube on Main way and 2 x MOOSE ACSR on Branch way with 225mm sub-conductor spacing

T clamp to suit 4"IPS Al tube on main way and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

Terminal Connector on 230KV Underhung post insulator to suit 2 x MOOSE ACSR with 225mm sub-conductor spacing-Through type

Terminal Connector on 230KV Underhung post insulator to suit 4 x MOOSE ACSR with 225mm sub-conductor spacing-Through type

230kV Bolted type Double Tension String assembly with double anchoring suitable for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

230kV Bolted type Double Tension String assembly with double anchoring suitable for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

230KV Underhung Insulator (8KN) for suspension for connecting 2 x MOOSE ACSR with 225mm sub conductor spacing

230kV Bolted type Double Tension String assembly with double anchoring suitable for 8 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing on both side insulator hardware.

230kV Bolted type Double Tension String assembly suitable with double anchoring for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

230kV Bolted type Double Tension String assembly suitable with double anchoring for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

230KV Underhung Insulator (8KN) for suspension for connecting 4 x MOOSE ACSR with 225mm sub conductor spacing

Rigid Spacers to suit 4 x MOOSE ACSR Conductor with 225mm subconductor spacing.

Rigid Spacers to suit 2 x MOOSE ACSR Conductor with 225mm subconductor spacing.

Corona Bell to suit 3" IPS Al. tube

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 Nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 Nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

110KV Underhung Insulator (8KN) for suspension for connecting 2 x MOOSE ACSR with 225mm sub conductor spacing

110kV Bolted type Double Tension String assembly with single anchoring suitable for 10 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing on both side insulator hardware.

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

110KV Underhung Insulator (6KN) for suspension for connecting 4 x MOOSE ACSR with 225mm sub conductor spacing

Fired 'C' Type Boltless wedge connectors to suit moose conductor to moose conductor connections.

Fired 'C' Type Boltless wedge connectors to suit moose conductor to Equipment connections.

230KV Bolted type suspension fitting suitable for Quad moose

230 KV Bolted type suspension fitting suitable for Twin moose

110 KV Bolted type suspension fitting suitable for Quad moose

110 KV Bolted type suspension fitting suitable for Twin moose

420kV Single Suspension String assembly suitable for 25 no.Anti fog type disc insulator of 120kN, with Through Clamp and its associated hardware accessories suitable for Twin MOOSE ACSR with 450mm Sub Conductor spacing.

T clamp for single moose to single moose for 400KV

Free end clamp 4" Al. bus (expansion type)

Free end clamp 3" Al. bus (Rigid/sliding)

Free end clamp 3" Al. bus (expansion type)

Mechanical foam type fire extinguisher trolly mounted 60 Ltrs capacity with complete set with hose and air induction nozzle and all accessories strictly confirming to latest issue of IS 13386/1992 with ISI certification

Mechanical foam type portable 9ltrs capacity fire extinguisher with initial charge complete with chromium plated GI Cap, High pressure nylon braided discharge hose, nozzle and all accessories strictly confirming to latest issue of IS 10204/2001 with ISI certification

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type trolley mounted 25KG capacity with accessories

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type Portable 9KG capacity

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type Portable 6KG capacity

Manufacturing and supply of Fire bucket of 10 litre capacity made out of 26(0.46) SWG MS Sheet painted with white & red enamel paint inside & outside respectively : bottom of bucket shall be U shaped outside of the bucket shall be written as Fire in English & tamil in white enamel paint,including cost of all materials

Manufacturing and supply Supply of sand drum made out of oil drum of size 580mm dia and 420 mm height with conical cover madeout of tin sheet provided with handle including the cost of barrel,sand and consumables as directed by the field engineer

Fire shed suitable to storing outdoor fire equipments near Auto Transformer and 230Kv Breakers

Fire stand suitable to Battery Room

Fire protection alaram system for Main control room building, Cable gallery and for all the Kiosk buildings with smoke detectors

Fire fighting equipments Display Boards and first aid safety chart boards as required.

MS Rod 40mm for Earth Mat, Auxiliary earth mat and Earth Electode, MS Flat 75X12mm for earth raiser for earthing system, Earth Spike with standard GI Pipe/GI Round rod 40mm dia, Height 3000mm, Provision for sharp edge at top,Provision for earth connections to MS Flat 65X10mm/GI Earth wire 7/3.55, 3 run each and painting as required by the field engineer.(including materials for DSLP)

Supply of maintanance free earthing system consisting of one copper bonded Earthing Electrode 17.20mm dia 3050mm length (10 feet) length with 250micron copper bonding along with 2 bags of (11.3kg each) of Ground enhancement mwterial (GEM 25A) and 50x50x25mm size clmap, 65x10mm, 200mm length Flat for terminal connector

Special compound to improve earth electrode resistance

250KVA Diesel Generator Set with all accessories with provision of Automatic Main Failure(AMF) Panel for emergency AC supply

11KV/433V, 500KVA Station transformer (including structure) with 4 way FRP pillar box and with suitably rated SCADA ready RMU (RRLL configuration) with FRTU including suitably rated HT cable between RMU to station transformer and termination kit and LT supply cable, accessories and arrangements, FO communication cable with necessary media converters for integrating FRTU in RMU with SAS

Outdoor yard illumination for switch yard, LLM tower, street lighting with tubular pole as per specification and design, including all materials and consumables using LED technology for arriving LUX level of 30.

3KVA,UPS for emergency lighting of control room

AC FRP junction box

DC FRP interlock junction box

AC Distribution Panel for Kiosk

DC Distribution Panel for Kiosk

LC/Key Board/Earth Mat &Earth Electrode layout of size 3000 mm X 1500 mm out of 75X25 mm Alu. Frame embedded with 12mm pre laminated wood particle board using screw on rear two Nos plain class of 5 mm thick fixed with metal roller moving on Aluminium Channel with on front with locking arrangement LG class piece should be fastended on the glass shutters for opening and closingwall clamp made out of 6mm MS plate should be provided on as per drawing along with hook for key with token and as directed by the field engineer including cost of all materials.

Supplying and fixing of split Air Conditioner (1 phase -2 Ton capacity) of approved make (Daikin or equivalent) with all accessories including stabilizer( V guard) with reputed make including cost of all materials, leads, lift, fixing charges, etc., complete as per standared specification complete.

Environmental control unit which comprise of 2 Nos. two tonne capacity and type split A/C Air conditioners (1 Main + 1 standby) working inconjunction through a microprocessor based controller for desired operation.Each unit should have two compressors etc complete as per standard specification.

Flexible copper tape/rope, flexible braided copper for interlinking panel earthing and for providing connectivity wherever necessary/ other purpose as directed by field engineer

Supply of Solar Panels on top of Control room

Item Rate BoQ

BoQ_Ver4.0

Specification No: T-2372

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE - ERECTION (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

420 KV, 3150 A, 63 KA, SF 6 Circiut Breaker 220 V DC Control (without pre insertion resister) with Control switching device. (CSD) and all accessories, Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

420 KV, 3150 A, 63 KA, SF 6 Circiut Breaker 220 V DC Control with pre insertion resister and all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

245 KV, 2000 A, 50 KA, SF 6 Circiut Breaker 220 V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

145 KV, 2000 A, 40 KA, SF 6 Circiut Breaker 220 V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

420 KV, 3000 A, 63 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 3000-2000-1000-/1A) with Terminal Connectors and clamps, G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CT's)

245 KV, 2000 A, 50 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-800-/1A) with Terminal Connectors and clamps.G I Tubular Mounting Structure, Hot Dip Galvanising Steel Foundation Bolt (1 No.Junction Box for 3Nos CT's)

145 KV, 2000 A, 40 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-800/1A) with Terminal Connectors and clamps, G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CT's)

420 KV, 200 VA, 400KV/√3/110 V /√3, Capacitive Voltage Transformer with Terminal Connectors and clamps, G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CVT's)

245 KV, 200 VA, 230KV/√3/110 V /√3, 50KA Line Voltage Transformer with Terminal Connectors and clamps G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos LVT)

145 KV, 200 VA, 110KV/√3/110 V /√3, Line VoltageTransformer with Terminal Connectors and clamps, G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for each LVT)

245 KV, 200 VA, 50KA 230KV/√3/110 V /√3, Potential Transformer with Terminal Connectors and clamps,G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos PT)

145 KV, 200 VA, 110KV/√3/110 V /√3, Potential Transformer with Terminal Connectors and clamps, G I Tubular Mounting Structure ,Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos PT)

390 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories, G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt

216 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt

96 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal onnectors and clamps and all accessories G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt

420 KV, 3150 A, 63 KA, Horizontal double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 3Nos MOMD for Main Blade and 3 Nos MOMD for earth switch with G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

420 KV, 3150 A, 63 KA, Horizontal double Break with Double earth switch- 440 V AC Motor operated with 220 V DC Control, 3Nos MOMD for Main Blade and 6 Nos MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade and 1 No MOMD for earth switch with G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with out earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade with G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with out earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade for higher elevation.

145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade and 1 No MOMD for earth switch including G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

145 KV,2000 A, 40 KA, Horizontal Centre Rotating Double Break without earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade. including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

145 KV,2000 A, 40 KA, Horizontal Centre Rotating Double Break without earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade for higher elevation.

420 KV, 3150 A, 63 KA, Vertical operated single Break Bus earth switch- 440 V AC Motor operated with 220 V DC Control, 1Nos MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt.

245 KV, 2000 A, 50 KA, Vertical operated single Break Bus earth switch- 440 V AC Motor operated with 220 V DC Control, 1Nos MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt.

145 KV, 2000 A, 40 KA, Vertical operated single Break Bus earth switch- 440 V AC Motor operated with 220 V DC Control, 1Nos MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt.

420 KV, Solid core Insulator with Corona ring G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps.

245 KV, Solid core Insulator G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps.

145 KV, Solid core Insulator G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps

LT 433 V, AC Distribution Board with MCB's with LT Circuit Breaker Control and Change over switch for 400 KV SS

800A AC change over switch

220V DC Distribution board with MCBs, with one control Panel each for change over arrangement of Charger supply

200 A DC change over switch with panel (1 panel for 4 Switches)

Out door 433 V AC Distribution Cubic with 20 Nos, 32 A MCB's and 10 Nos, 16 A MCB's, with weather proof stainless steel cabinet for all equipmnets/ Isolators.

Outdoor 433 V AC Distribution Cubic with 1 No, 200 A MCB's and 10 Nos, 32 A MCB's, with weather proof stainless steel cabinet for ICT's .

Outdoor 220 V DC Distribution Cubic with 30 Nos, 32 A MCB's with weather proof stainless steel cabinet for all equipmnets/ Isolators/ICT's .

Outdoor 433 V AC Distribution Cubic with 10 Nos, 32 A MCB's with weather proof stainless steel cabinet for LLM .

220 V DC, 400 AH, battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

220 V, 80 A Float, float cum Boost Battery Charger with Change over switch.(FC+FCBC)

220 V DC, 300 AH, battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

220 V, 60 A Float / Float cum Boost Battery Charger with Change over switch.(FC+FCBC)

48V DCDB with MCB's, DC Change over switch, neccessary cabling for 48 V DC Charger and 48 V DC Batteries

48 V DC, 600 AH, battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

48 V, 120 A Float , float cum Boost Battery Charger with Change over switch.(FC+FCBC)

400KV Bus bar protection Panel

Synchronising cum Islanding Panel for 400KV Bays

Control & protection Panel for 400kv Line

Control & protection Panel for 400kv Tie breaker bay

Control & protection Panel for 400/230 KV ICT (Both HV & LV Panel)

Control & protection Panel for 400/110 KV ICT (Both HV & LV Panel)

230KV Bus bar protection Panel

Synchronising cum Islanding Panel for 230KV Bays

Control & protection Panel for 230kv Line /Feeder

Control & protection Panel for 230kv Transfer bus coupler bay

Synchronising cum Islanding Panel for 110KV Bays

Control & protection Panel for 110kv Line /Feeder

Control & protection Panel for 110kv Transfer bus coupler bay

110KV Bus bar protection Panel

Sub station Automation system for 400KV/230kv-110KV SS for 28 bays ( 12nos 400KV Bays, 7nos 230KV Bays, 9nos 110KV Bays )

Outdoor armoured 24Core FO Cable for connectivity of all kiosks with the SAS LAN and with station Auxiliary systems including all FODPs.

Erection, Testing and commissioning of complete SAS for 400KV/230kv-110KV SS for 28 bays. ( 12nos 400KV Bays, 7nos 230KV Bays, 9 nos 110KV Bays ) including Control & protection panels and all FO cables of SAS

Erection, testing and commissioning of Visual monitoring system

Communication equipments :

Analogue Telephone with 4pair Telephone Cable and necessary accessories (5 Nos. for Samugarengapuram 400kV SS, 4 nos for S.R Pudur 230kV SS)

VOIP Telephones with CAT6 shielded Cable, necessary gateway , ethernet switches and other accessories(2 Nos. for Samugarengapuram 400kV SS[ 4 Nos for 400kV Kiosk, 3 Nos for 230kV Kiosk, 3Nos for 110kV Kiosk],2 nos for S.R Pudur 230kV SS with Gateway)

Erection, testing & commissioning of Hybrid type Optical Line Terminal Equipment/(FOTE) (SDH,PDH & MPLS-TP) (2 Nos. for Samugarengapuram 400kV SS and 1 no for S.R Pudur 230kV SS).

Erection, testing & commissioning of Digital Protection(4 Nos. for Samugarengapuram 400kV SS, 2 nos for S.R Pudur 230kV SS, 2 nos for Muppandal 230kV SS, 2 nos for Nanguneri 230kV SS)

Erection, testing & commissioning of Hybrid EPAX along with VOIP/Analogue telephones and accessories

Erection of Standalone Rack Panel for accommodating 4 nos Fibre optic 1" Rack with 4x19" rack provision 2000X800X800 mm with mm Thichkness and necessary fibre entry provision.

Armoured Copper Control Cable 8CX 4mm2

Armoured Copper Control Cable 4CX4mm2

Armoured Copper Cable 4CX16mm2

Armoured Copper Cable 2CX16mm2

Armoured Copper Control Cable 28 C X 2.5mm2

Armoured Copper Control Cable 14 C X 2.5mm2

Armoured Copper Control Cable 20C X 2.5mm2

Armoure Copper Control Cable 4C X 2.5mm2

Armoured Copper Control Cable 8CX 2.5mm2

Armoured Copper Control Cable 2CX2.5mm2

LT Power cable 4C x 120 sq.mm AL

LT Power cable 4C x 240 sq.mm AL

LT Power cable 4C x 25 sq.mm AL

LT Power cable 2C x 16 sq.mm AL

Armoured Fibre Optic Cable 48 Core (For communication equipment)

Armoured Copper Cable 2x35mm2

11 KV , 160 KN Anti fog Strain Disc Insulator

11 KV ,120 KN Anti fog Strain Disc Insulator

100mm Dia Aluminium Bus Bar with welding sleeve

75mm Dia Aluminium Bus Bar with welding sleeve

ACSR Moose Conductor

GI Ladder type Cable Tray 2.5m L, 0.3m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.45m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.60m W and 2mm thickness with coupling plate and bolt nuts

Reflector sticker of reputed make for colour coding of all equipments and structures

T clamp to suit Twin MOOSE ACSR on all ways with 450mm sub-conductor spacing

T clamp to suit Twin MOOSE on main ways with 450mm sub-conductor spacing and single MOOSE on branch way

T clamp to suit Twin Moose on main way with 450mm sub-conductor spacing and Twin Moose ACSR on branch way with 450mm sub-conductor spacing

T clamp to suit 4" IPS Al. tube on Main way and Quad MOOSE on Branch way with 450mm sub-conductor spacing

T clamp to suit 4" IPS Al. tube on Main way and Twin MOOSE on Branch way with 450mm sub-conductor spacing

Corona Bell to suit 4" IPS Al. tube

420kV Bolted type Double Tension String assembly suitable for 25 no.Anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, with double anchoring, corona ring, and tension clamp set suitable for Twin MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no.Anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, with double anchoring, corona ring, and tension clamp set suitable for Twin MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Single Suspension String assembly suitable for 25 no. Anti fog type disc insulator of 120kN, with Drop Clamp and its associated hardware accessories suitable for Twin MOOSE ACSR with 450mm Sub Conductor spacing.

420kV Bolted type Single Suspension String assembly suitable for 25 no. Anti fog type disc insulator of 120kN, with Drop Clamp and its associated hardware accessories suitable for Quad MOOSE ACSR with 450mm Sub Conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no. Anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, with double anchoring, corona ring, arcing horn and tension clamp set suitable for 4 x MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no. Anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, with double anchoring, corona ring, arcing horn and tension clamp set suitable for 4 x MOOSE ACSR bundle with 450mm Sub conductor spacing.

Rigid Spacers to suit 2 x MOOSE ACSR Conductor with 450mm sub conductor spacing.

Rigid Spacers to suit 4 x MOOSE ACSR Conductor with 450mm sub conductor spacing.

T clamp to suit 2 x MOOSE ACSR on all ways with 225mm sub conductor spacing

T clamp to suit 2 x MOOSE ACSR on main way with 225 sub-conductor spacing and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

T clamp to suit 2 x MOOSE on main way with 225mm sub-conductor spacing and 1 x MOOSE ACSR on branch way.

T clamp to suit 3" IPS Al. tube on Main way and 2 x MOOSE ACSR on Branch way with 225mm sub-conductor spacing

T clamp to suit 4"IPS Al tube on main way and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

Terminal Connector on 230KV Underhung post insulator to suit 2 x MOOSE ACSR with 225mm sub-conductor spacing-Through type

Terminal Connector on 230KV Underhung post insulator to suit 4 x MOOSE ACSR with 225mm sub-conductor spacing-Through type

230kV Bolted type Double Tension String assembly with double anchoring suitable for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

230kV Bolted type Double Tension String assembly with double anchoring suitable for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

230KV Underhung Insulator (8KN) for suspension for connecting 2 x MOOSE ACSR with 225mm sub conductor spacing

230kV Bolted type Double Tension String assembly with double anchoring suitable for 8 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing on both side insulator hardware.

230kV Bolted type Double Tension String assembly suitable with double anchoring for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

230kV Bolted type Double Tension String assembly suitable with double anchoring for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

230KV Underhung Insulator (8KN) for suspension for connecting 4 x MOOSE ACSR with 225mm sub conductor spacing

Rigid Spacers to suit 4 x MOOSE ACSR Conductor with 225mm subconductor spacing.

Rigid Spacers to suit 2 x MOOSE ACSR Conductor with 225mm subconductor spacing.

Corona Bell to suit 3" IPS Al. tube

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 Nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 Nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

110KV Underhung Insulator (8KN) for suspension for connecting 2 x MOOSE ACSR with 225mm sub conductor spacing

110kV Bolted type Double Tension String assembly with single anchoring suitable for 10 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing on both side insulator hardware.

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

110KV Underhung Insulator (6KN) for suspension for connecting 4 x MOOSE ACSR with 225mm sub conductor spacing

Fired 'C' Type Boltless wedge connectors to suit moose conductor to moose conductor connections.

Fired 'C' Type Boltless wedge connectors to suit moose conductor to Equipment connections.

230KV Bolted type suspension fitting suitable for Quad moose

230 KV Bolted type suspension fitting suitable for Twin moose

110 KV Bolted type suspension fitting suitable for Quad moose

110 KV Bolted type suspension fitting suitable for Twin moose

420kV Single Suspension String assembly suitable for 25 no.Anti fog type disc insulator of 120kN, with Through Clamp and its associated hardware accessories suitable for Twin MOOSE ACSR with 450mm Sub Conductor spacing.

T clamp for single moose to single moose for 400KV

Free end clamp 4" Al. bus (expansion type)

Free end clamp 3" Al. bus (Rigid/sliding)

Free end clamp 3" Al. bus (expansion type)

Fire shed suitable to storing outdoor fire equipments near Auto Transformer and 230Kv Breakers

Fire stand suitable to Battery Room

Fire protection alaram system for Main control room building, Cable gallery and for all the Kiosk buildings with smoke detectors.Automatic fire dection and alarm system shall be intelligent and addressable type and shall be provided to facilitate detection of fire at the incipient stage and give warning to the staff.

Fire fighting equipments Display Boards and first aid safety chart boards as required.

MS Rod 40mm for Earth Mat, Auxiliary earth mat and Earth Electode, MS Flat 75X12mm for earth raiser for earthing system, Earth Spike with standard GI Pipe/GI Round rod 40mm dia, Height 3000mm, Provision for sharp edge at top,Provision for earth connections to MS Flat 65X10mm/GI Earth wire 7/3.55, 3 run each and painting as required by the field engineer.

Supply of maintanance free earthing system consisting of one copper bonded Earthing Electrode 17.20mm dia 3050mm length (10 feet) length with 250micron copper bonding along with 2 bags of (11.3kg each) of Ground enhancement meterial (GEM 25A) and 50x50x25mm size clmap, 65x10mm, 200mm length Flat for terminal connector

Special compound to improve earth electrode resistance

250KVA Diesel Generator Set with all accessories with provision of Automatic Main Failure(AMF) Panel for emergency AC supply

11KV/433V, 500KVA Station transformer (including structure) with 4 way FRP pillar box and with suitably rated SCADA ready RMU (RRLL configuration) with FRTU including suitably rated HT cable between RMU to station transformer and termination kit and LT supply cable, accessories and arrangements, FO communication cable with necessary media converters for integrating FRTU in RMU with SAS

Outdoor yard illumination for switch yard, LLM tower, street lighting with tubular pole as per specification and design, including all materials and consumables using LED technology for arriving LUX level of 30.

AC FRP junction box

DC FRP interlock junction box

AC Distribution Panel for Kiosk

DC Distribution Panel for Kiosk

LC/Key Board/Earth Mat &Earth Electrode layout of size 3000 mm X 1500 mm out of 75X25 mm Alu. Frame embedded with 12mm pre laminated wood particle board using screw on rear two Nos plain class of 5 mm thick fixed with metal roller moving on Aluminium Channel with on front with locking arrangement LG class piece should be fastended on the glass shutters for opening and closingwall clamp made out of 6mm MS plate should be provided on as per drawing along with hook for key with token and as directed by the field engineer including cost of all materials.

Environmental control unit which comprise of 2 Nos. two tonne capacity and type split A/C Air conditioners (1 Main + 1 standby) working inconjunction through a microprocessor based controller for desired operation.Each unit should have two compressors etc complete as per standard specification.

Erection, Testing and commissioning of Solar Panels on top of Control room

ESHSCost Schedule

Resources allocated to ESHS management

Drafting and updating the ESHS documentation, reporting, inspections

Implementation of the Health and Safety Plan: Meetings, health care centre, medical check ups, emergencies and evacuations, safety protective equipment, hygiene

Accommodation, drinking water, meals and transportation of staff(*) (*) : The Bidder shall detail the financial conditions of the supply of accommodation, meals and transport to its staff:  Accommodation  Meals  Transport

Training and local recruitment management costs

Protection of adjacent areas, biodiversity,prevention of erosion and wastewater management

Traffic, noise and atmospheric emissions management, land take

Waste and hazardous products management

Vegetation clearing and site rehabilitation