Balance work of Allopathic Dispensary Inderwal chatroo kishtwar

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Disposal of excavated earth for an average distance of 05 Km by mechanical transport

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Half Brick masonary with with common burnt clay bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 mix

Reinforced cement concrete work in all walls( any thickness), incl. attached pilasters, buttresses plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforecement in:

1.1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). Crushed

Centering and shuttering incl. strutting, propping etc. and removal of form work for :.

Suspended floor, roof landing

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

CEMENT PLASTER IN TWO COATS 20mm Cement plaster in cement plaster 1 : 4 mix (1 cement : 4 coarse sand)

Providing and laying 50 mm concrete flooring 1:2:4 ( 1 cement :2 caorse sand: 4 graded stone aggregate ) 20 mm

Labour charges for fixing 35 mm thick flush door shutters excluding cost of shutter and hinges

Providing and fixing plained eaves boarding. Ornamental kail wood 250x32 mm (nominal size )

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows. Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. 4mm thick glass panel (weighing not less than 10 kg / sqm)

Providing / fixing of stainless steel railing grade 304 made and hollow tubes channels including welding of joints, grinding, polishing and making curvature and fitting the same with necessary nuts and bolts, fixing, railing with necessary accessories and stainless steel, bolts.

Lum Sum Provision for repairment of main gate

Lum Sum Provision for cleaning of whole building

Plumbing , Sanitary Installations:-

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White

Providing and fixing wash basin with C.I/M.S. brackets, 15mm C.P. brass taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whenever required:

White vitreous china wash basin size 630 x 450 mm with a pair of 15mm C.P brass pillar taps.

Providing and fixing white vitreous cement china pedestal wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard.

Rectangular shape 453x357mm

Providing and fixing 600x120x5mm glass shelf with edge round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete.

Providing and fixing white viterous china laboratory sink including making all connection excluding cost of fitting:

Size 450 x 300 x 150 mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:

Semi rigid pipe 40mm dia

Flexible pipe 40mm dia

C.P. Fitting

Providing and fixing of 15 mm CP bib cock of approved make ( Jaquar make) having code no. CON CHR 037 confirming to IS 2980

Providing and fixing of CP Angle value of Jaquar make having code no. CON CHR053

Providing and fixing of CP mixer of approved make having code no. 167 B

Providing and fixing of 600 mm long tower rail of approved make having code no. 1111

Providing and fixing of CP soap dish of approved make having code no. 1131 N

Providing and fixing of CP paper holder of approved made with necessar screw and plastic gatti make having code no. 1151

Providing and fix of CP shower of approved make having code no. 1799 incl. shower arm

Providing and fixing 10mm sand CP grating for gully, floor or nahani trap.

Providing and fixing in position 40mm diameter mosquito proof couping of approved municipal design.

Providing and fixing of CP neeple of approved make

Providing installation and testing of Geyser of approved quality and manufacture jagwar make mounted on boltd, well anchored in wall and connected with hot and cold G.I. connection with superior angle values as required: (25 litres capacity)

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)

20 mm dia. nominal bore (Medium)

CPVC PIPES AND FITTINGS Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc.

150mm nominal outer dia pipes.

AMEENA BEGUM

MOHAMMAD SHAFI