Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 CrAccepted-AOC | ₹1.5 Cr | L1 | Accepted-AOC Bidder is L1 and has quoted lowest item rates overall |
| 2 | L2₹1.7 Cr+₹18.6 L (12.4%)Rejected-Finance | ₹1.7 Cr+₹18.6 L (12.4%) | L2 | Rejected-Finance Bidder is Quoted Higher Rate |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not As Per NIT |
Tender Value
₹1.9 Cr
EMD Value
₹2.4 L
Closing Date
13 Mar 2024, 3:00 pmClosed
Staff Officer (Civil), Pench Area
Staff Officer (Civil), AGM Office, Pench Area, P.O. Parasia, Dist. Chhindwara (M.P.) 480441
Repairing of road connecting Shivpuri Sub-Area and Dhigawani (Total 3.8 Km) under Pench Area.
2024_WCL_302306_1
pe3350-civ-s-e051-2023-24
Open Tender
Civil Works - Roads
Item Rate
90 days
SHIVPURI SUB AREA
As Per NIT
5 documents required · 5 mandatory
₹2.4 L
Yes
4 Feb 2025
22 Feb 2024
15 Mar 2024
22 Feb 2024
13 Mar 2024
22 Feb 2024
22 Feb 2024 - 29 Feb 2024
Amount
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres.
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in accordance to Table No. 400-12, 400-13 and as per clause of section 406 of specifications.
Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. @0.30 kg per sqm (dry & hungry bituminous surfaces /granular surfaces treated with primer)
Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction and as per clause 504 of specifications. Using Batch Mix Plnt of appropriate capacity and Paver finisher Hydraustatic with Sensor. for GradingII(19 mm nominal size) bitumen content 3.5%
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats all complete as per clause 511 of specification. Case - II : Type B (Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 75 tonnes/ hours using crushed stone chipping (aggregate shall pass 2.36mm seal and retained to 180 micron sieve) and penetration bitumen of suitable grade all complete as per clause 511 of specification.
Total impact of GST for the purpose of CTC
TULSIRAM CHOUKSEY
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .