88/W/EDC II/SRE/2022-23

Amount

Detail of Work

Safely cartage of ST poles SP-55, 11 Mtr. & SP-72, 13 Mtr. long from ESC, SRE to the site of work including loading & unloading at both ends.(Distance upto 25 KM.)

Safely cartage of complete line material (Except ST poles) from ESC, SRE to the site of work/ Dumping Place/ Other Place to local dumping ground or 33 KV S/S/ other place of site including loading & unloading at both ends. (Dist. upto 25 KM.)

Safely cartage of 33 KV & 11 KV XLPE Cable from ESC, SRE to the site of work including loading & unloading at both ends.(Distance upto 25 KM.)

Erection of single ST poles SP-55, 11 Mtr. & SP-72, 13 Mtr. Long with completing fitting of all accessories of 33 KV line as per RESPO Specifications.

Fabrication and Erection of double pole SP-55, 11 Mtr. & SP-72, 13 Mtr. long ST Poles with complete fitting of bracings & other accessories as per RESPO Specifications.

Fabrication and Erection of Four pole structure SP-55, 11 Mtr. & SP-72, 13 Mtr. long ST Poles with complete fitting of bracings & other accessories as per RESPO Specifications.

Fixing of 33 KV stay rods by digging of pits in block of 600X600X300 mm. & with new brick and nozzling of stay wire 7/8 SWG and fitting the same on the pole

Concreting of ST poles SP-55, 11 Mtr. & SP-72, 13 Mtr. long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1''x1.5'' with plinth.

Laying, lifting, Stringing, sagging jumpering & binding of ACSR Dog conductor on ST Pole for 33 KV Line as per RESPO specifications.

Earthing of ST Poles by earthing rod 20x2500 mm as per RESPO specifications.

Providing and Fixing X-Arm clamp, E- clamp, Channel & Angle clamp, & Guarding clamp for ST Poles made of new MS flat size 65x8 mm.

Providing and Fixing F- clamp, for ST Poles made of new MS flat size 65x6 mm.

Providing and Fixing Bracing & Stay clamp, for ST Poles made of new MS flat size 65x6 mm.

Providing and Fixing 33 KV Danger board with clamp for ST Poles made of new MS flat size 40x5 mm with nuts & bolts.

Providing and Fixing PG clamp for dog to dog conductor.

Providing and Fixing of Stone Ped 300x300x75

Providing and Fixing Hexagonal nuts & bolts & washers size 3/4"x5"

Providing and fixing of GI barbed wire on the each pole.

Providing and fixing of G.I. pipe 150 mm 2.5 mtr. long at the both side of double pole with clamps.

Providing of Alluminium Paint (British/Asian/enamel paint)

Providing of Red oxide Paints (British/Asian/enamel paint)

Painting of ST poles 11 Mtr, SP-55 & SP-72, 13 Mtr. with 2 coats of synthetic enamel paint after one coat of ready mix primer as well as rubbing/cleaning of surface as required for proper completion of work. and remaining by Aluminium paint including all channels/clamps etc.

Digging of trench 1.5 mtr. Deep and laying of 2 No. Parreral HDPE pipe 150 mm dia on 1 meter distance With Providing of HDPE and Laying of 2 No. Parreral 33 KV XLPE cable 3X300sq mm in the HDPE pipe 150 mm dia on 1 meter distance The work includes digging laying of cable in underground trenches, back filling of earth, spare length of cable shall be left over and laid in the trenches in shape of 6m rings at both ends. Where the cable is to be laid across pucca/main road, 150mm dia G.I pipe will be weared over the cable in the trench for the protection of cable.

Fixing & Making of 33 KV Cable Heat shrinkable terminations kits of size 300sqmm of outdoor side.

Guarding of span of 33 KV line on road crossing/ River crossing and HT/LT line crossing with G.I. wire as per RESPO Specifications.

Making connection from 132 KV S/S gantry to 4 pole including all accessories (on the S/S 220 KV, Saharanpur)

Making jumpering on the four pole/ double pole of 33 KV line.

Off shooting of tree branches for Clearence of proposed 33 KV line. (Approx 7 Km line)

Safely carriage of 33 KV New 2 No. line isolator complete from ESC SRE to 33/11 KV S/S Shakumbari Vihar including loading & unloading at both end (App dis 0 to 20 km.).

Fabrication and erection of Isolator structure (Bus & Line) each by using 3.5 m long 4 Nos. of M.S. channel of size (125x65x6)mm bracing by M.S. Angle (50x50x6) mm size and providing 2 Nos. M.S. Angle (75x75x8) mm and 2.6 m long on the top of channel at both side of Isolator. The work also includes cutting, drilling, welding and alignment of the same for completion of work.

Fixing, Grouting & installation of 33 KV line isolator with structure in switch yard and fixing Bus Bar with proper alignment. with plinth good quality bricks, ballest, sand & cement with complete work in ratio 1:4:8 and plastering & grouting of complete in all respect & Providing and fixing of All Clamp for 33 KV Busbar made of Aluminum Alloy.

Maverick Power Solutions Pvt. Ltd

Saraswati Electricals & Contractors

Bidder Name

EKTA ENTERPRISES