Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.0 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹37.7 L+₹28,325 (0.76%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹38.3 L+₹86,112.02 (2.30%)Rejected-Finance | L3 | Rejected-Finance Other than the lowest bid | |
| 4 | L4₹39.0 L+₹1.6 L (4.21%)Rejected-Finance 15 GURU RAM DASS COLONY MITHAPUR JALANDHAR | L4 | Rejected-Finance Other than the lowest bid |
Tender Value
₹41.4 L
EMD Value
₹82,860
Closing Date
4 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (West)
Kabir Road Jalandhar Cantt
SPL REPAIR OF 06 X BATHROOM AT BLDG NO P-816 AND P-817, 1 SIKH LI AND OTHER SANCTIONED WORK UNDER GE (WEST) JRC
2024_MES_645328_1
GE/JAL(W)-84/2023-24
Open Tender
Civil Works
Item Rate
180 days
JALANDHAR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (West)
₹82,860
Yes
30 Apr 2024
6 Mar 2024
11 Apr 2024
6 Mar 2024
4 Apr 2024
23 Mar 2024
Amount
Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above ground level)
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
Material & labour for Non skid Coloured ceramic tiles 7 to 8 mm thick (square or rectangle) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with including screed bed in cement mortar 1:4, 15mm thick for laying floor tiles, over and including 25mm thick plain cement concrete (1:2:4) type B-1, complete all as specified and directed.
Material & labour for coloured glazed ceramic tiles in vertical surface of size 350mmx250mmx7mm / 450mmx350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 10mm thick cement plaster in cement mortar 1:4, complete all as specified and directed.
Supply and fixing squatting pan WC Orrisa pattern size 580mm x 440mm white with integral foot rest with P or S trap including provn. of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc and making good to floor complete all as specified and directed.
Supply & fixing wash hand basin vitreous china white, flat back, size 550 x 400 mm with a set of CI brackets, brass chromium plated waste coupling, waste fittings and PVC waste pipe 32 mm bore, including pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,connection to water tubing, PVC connection 15mm dia with brass check nuts complete all as specified and directed.
Supply and fixing vitreous china bowl urinal, half stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, etc all as specified and directed.
Supply and fixing 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified.
Taking up or down old steel tubing including fittings 15mm bore including cleaning for re-fixing or removal to store complete all as specified and directed.
All as per item No 9.00 above but 20mm dia .
Supply, laying, jointing and testing 15mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, complete all as specified and as directed.
All as per item No 11.00 above but 20mm dia.
Supply and fixing of 15mm bore bib tap cast copper, chromium plated, long body fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe in repairs complete all as specified and directed.
Supply and fixing of 15mm bore stop valve/Angle cock CP, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for union fixed in repairs complete all as specified and directed.
All as per item No 14.00 above but with long shank and cup (concealed type).
Supply and fixing 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density polythene ball screwed for iron pipe (Min for 20mm – 210 gm) complete all as specified and directed.
Supply & fixing in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete
Supply & fixing in repair push type pillar cock auto closing, screwed for iron pipe and fixed 15mm bore, complete all as specfied.
Supply & fixing in repairs Chromium plated grating 125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap.
Supply & fixing in repairs tubular towel rail, brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties)
Supply and fixing Rotational moulded polythene water storage tank 1000 litre capacity (Cylindrical vertical with closed top) hoisted in position including dismantling of existing tanks, complete all as specified and directed
Dismantling of cast iron drain up to100/75 mm dia from floor/walls etc and taking out of trenches/floors.
Material & labour for cast iron soil waste and vent pipe sand cast any length with or without ears with lead joints fixed to walls 75mm dia
All as per item No 24.00 above but bore of pipe 100mm dia.
Material & labour cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) diameter of outlet in 75mm.
Material & labour cement concrete type E-2, 1:5:10 using 40mm graded aggregate as in sunken floor complete.
Material & labour for sunken floor treatment as per following instructions and directed by Engr in Charge :- (A) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substratas must be mechanically prepared using abrasive blast cleaning or miling to remove cement laitance, existing coatings and achieve a gripping profile that is clean dry and free from laitance and any other form of surface contamination. The instructions contained in manufacturer's published literature should be strictly complied with, includingf but not limited to the following:- (a) Chipping out any visible cracks in "V-Groove" pattern as applicable. Cleaning of cracks and then filling those cracks with SIKA latex SBR 100 putty/Dr fixit 302 SBR latex/ Perma Latex SBR/ FOSROC Nitabond SBR latex/ Asian Paints latex as approved. Final cleaning of surface with power grinder, Wire brush, hair brush & vacuum pressure if required. (b) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO. (c) Whilist the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO of viscosity as per manufacturer's instructions. (d) Apply glass febric sheet of Sika Fab 1/FOSROC/ DR Fixit/ STP whilist the first coat is wet. (e) Once touch dry, apply second coat of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO of viscosity as per manufacturer's instructions on the entire area. (f) Second coat shall be applied 6-8 hours of application of previous coat and in the direction right angle to the previous coat. (g) The waterproofing coating should be taken to a height minimum 300 mm above the finished floor level on the vertical surface. (h) It is essential to cure Acrylic modified Cementitious coating immediately after application (minimum 6-8 hours drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.
Material & labour for protection plaster 15mm thick in cement mortar 1:3 admixed with & including appropriate Integral water proofing compound applied on the walls complete. Make of Admixture : SIKA Plastocrete Plus/FOSROC/ DR Fixit/ STP/CICO confirming to IS 2645.
Providing and applying a protection screed of 50 mm thick cement sand mortar (1:4) admixed with admixture over the applied water proofing coating on horizontal surface. Admixture : SIKA Plastocrete Plus/FOSROC/ DR Fixit/ STP/CICO confirming to IS 2645. All the corners and joints shall be pretreated with an elastic waterproofing sealing tape with a wooven bonding mesh on each surface over an elastic expansion zone in the centre of Make Sika Seal Tape S/FOSROC/ Dr Fixit/ STP. The membrane shall be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. Note for item No 30 to 32 :- Waterproofing/Sunken floor treatment shall be carried out through applicators authorised by the respective manufacturers and approved by GE.
Supply and applying of crack bridging water proofing sealing tape, Sika seal F tape or equivalent of FOSROC/ Dr Fixit/ STP complete.
Material & labour for 25mm thick cement concrete flooring type B-1, 1 :2 : 4, using 20 mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement.
Material & labour for GI spouts 40mm dia(medium grade) cut to size and shape and fixed in position complete all as specified and directed.
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame)exc 1.5 sqm and n exc 4.00 sqm incl removing from the premises complete all as spd and directed
Supply & fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixing in opening as per specification and drawing and as directed by Engineer-in-Charge.
Supply & fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per directed.
Material & labour for framed work as in door chowkats or frames, cooler stand, nosing of stair case steps of any size and in any position of grade FE 410 W Gde E-250 Quality - B and all as directed by the Engr in Charge.
Material & labour for 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated
Supply & fixing 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
Supply & fixing aluminium tower bolt anodised of extruded section 200mm size complete.
Supply & fixing aluminium cast type anodised handles 150 mm size complete.
Supply & fixing Butt hinges, medium weight cold rolled mild steel 100mm size complete.
Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar all as specified and as directed.
Material & labour for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.
Material & labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement
Material & labour for rendering 5mm thick in cement mortar 1:3 on ceilling finished even smooth without using extra cement.
Material & labour for preparation of newly plastered surface of walls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whiting primer complete all as specified and as directed.
Material & labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.
Material & labour for applying three coats of white wash wash on ceiling including preparation of newly plastered surface complete all as specified and as directed.
Material & labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
Material & labour for preparation of new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete.
Material & labour for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as directed all as specified.
Material & labour for preparation of old surface of walls and applying one coat of cement base paint complete all as specified and as directed.
Material & labour for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint in tint as directed.
Demolition of mud in roofs any thickness including leeping plaster (whether full thickness removed or only a part thereof) all as specified.
Dismantling of brick tiles single layer as in roof covering complete all as specified
Material & labour 40 mm thick brick tiles laid on bedding layer of cement mortar 1:6, 15mm thick and joints grouted flush in cement mortar 1:3, mixed with 5% of crude oil by weight of cement complete all as specified and directed.
All as per Ser item No 58.00 above but except tiles.
Material & labour for 50mm thick (average thickness) PCC padding in cement concrete type C-I (1:3:6) using 20mm graded crushed stone aggregate to bring top surface of slab in slope complete all as specified
Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.
Material & labour for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured & paid for separately.
Supply only Liquid water proofing compound complete all as specified and as directed.
Material & labour for flush pointing in cement mortar 1:3 on brick tiles laid flat in roof or paving including raking out joints complete all as specified and directed.
Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed.
Material & labour for 75 mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement complete all as specified and as directed.
Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed.
Hacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty.
Material & labour for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane.
Material & labour for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed.
Supply & fixing steel ventilator with top hung shutter including hinges, steel peg stay complete.
Supply & fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified as directed.
Demolition and breaking up drain pipes AC/PVC pipe n.exc 150 mm dia including all fittings.
Supply & fixing 110 mm PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed
Supply & fixing PVC (SWR) bends 110 mm all as secified and directed
Supply & fixing gunmetal globe/gate valve 20 mm dia with iron wheel head, screwed both ends ISI marked, including all fixing accessories all as specified and directed.
Material & labour for 100mm cast iron bends or elbows, square, or obtuse with access (inspection door) all as specified and as directed
Material & labour for 100mm cast iron bends or elbows all as specified and as directed
Material & labour for 100mm cast iron branch, double with access (inspection door) all as specified and as directed
Material & labour for 75mm cast iron bends or elbows sqaure or obtuse all as specified and as directed
Material & labour for 100mm cast branch, single with access (inspection door) all as specified and as directed
Material & labour for 100mm cast iron sockets (double) collars
Material & labour for 75mm cast iron sockets (double) collars
Material & labour for 100 mm cast iron Traps ‘P’ or ‘S’
Material & labour for 100 mm cast iron cowls
Material & labour for 75 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.
Material & labour for applying evenly a tack coat in one layers on concrete surface for fixing of APP membrane of industrial bituminous 85/25 @ 1.20 Kg per sq mtr including cleaning surfaces.
Material & labour APP based polymeric membrance minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application( sealed by flame) with over lap of 10 cm finally it will be finished with a coat of aluminium paint @0.200 Kg/Sqm as per manufactures instruction complete all as specified.
Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth, for foundation etc n exc 10 sqm in plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified.
Material & labour Cement conncrete 1:4:8 type D2 using(40mm graded stone aggr ) as in foundation filling complete all as specified and directed.
Material and Labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and as directed.
Material & labour for 40mm thick damp proof course in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork
Material & labour for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work.
Material & labour for PCC type B-1 1:2:4 (20mm graded stone aggregate) in surface channels and drain complete.
Supply & fixing Rolled mild steel Joist, channel, angle (65x65x6) or tee sections fixed independently, with connecting plates, etc. confirming to Gde Fe 410 -W (Gde-E-250) quality "A" complete.
Supply & fixing for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Material & labour 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surface even and fair without using extra cement
Material & labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
All as per ser item No 98.00 above but 8 to 12mm dia TMT bar as in stirrups, spacers and binders
Form work with rough finished flat surfaces to sides of concrete foundation, footings, base of columns, raft beams, sides and soffits of foundation and plinth beams and similar work.
Form work to sides of pillars, struts, columns and stanchions and similar work square, rectangular rough finished surfaces of concrete all as spd and directed.
Material & labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc. 10cm wide
Material & labour for reinforced cement concrete (nominal mix) type A0 1:1.5:3 (12.5mm graded) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete
Material & labour for reinforced cement concrete (nominal mix) type A0 1:1.5:3 (12.5mm graded) in Columns, pillars, piers, posts and struts etc complete.
Material & labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick cement plaster in cement mortar 1:4 as in backing coat including fixing nut bolt complete.
Supply & fixing mild steel framed work as in doors or gates of angle or other section with gusset plate, rail,braces etc complete including drilling for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hook or hinges or steel hanging door fitting and hanging fastening and fixing complete conforming to Fe 410W (Gde E-250) quality A, all as specified and directed.
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil.
Material & labour for Broken stone or boulders as in hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered, rammed to a true surface etc complete all as specified and directed
Material & labour for 100mm thick cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub-base
Material & labour for 25mm thick Sand coushening under paver block complete all as specified and directed.
Material & labour machine pressed precast coloured concrete interlocking paver blocks any shape and size confirming of IS 15658: 2006 of 60mm thick , M-35 laid and jointed with grey cement and pigment.
Material & labour for pre-cast cement concrete curve blocks machine made (1:2:4) type B1 of size 450mmx100mmx200mm using 20mm graded stone aggr set in cement mortar 1:6 on side of road including necessary excavation and embedding in ground to the required depth as directed and temping around after filling earth and removing surplus soil to a distance n exc 50m complete all as specified.
Material & labour for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in kerbs or mud stops, rounded or chamfered on edges of paving blocks as directed including use and waste of form work.
Material & labour for Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow complete as specified.
Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm thick complete.
Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.
Material & labour for steel window/ ventilator 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mmx25mm single rebated comprises of glazed and skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf -01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note: Wire gauge/glass shall be measured and paid for separately.
All as per ser item No 117.00 above but glazed shutter
Supply & fixing framed work such as grills & gates, gratings with ends of bars shouldered on forged in spickes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde-165 complete.
Supply & fixing galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average with aperture 1.18mm fixed with tinned tacks, or galvanized wire staples complete.
Supply & fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified.
Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors
Taking down unserviceable Submain of any size as directed by Engineer-In-Charge.
Taking down main switch / DB as directed by Engineer-In-Charge.
Material & labour for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including sunken type pressed steel terminal boxes and plastic laminated white / coloured top sheet cover 3.0 mm thick for: One light / fan / call bell point controlled by one, one way switch.
One 3 pin socket out let 5 Amps on same board with other switches.
One 3 pin socket out let 5 Amps on the independent board.
All as per item No.125.00 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 1.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board
Supply & fixing switch Piano 5 Amps, flush button type, SP, one way, 230 Volts, AC
Supply & fixing switch Piano 1 5 Amps, flush button type, SP, one way, 230 Volts, AC
Supply & fixing socket out let multipurpose 5 pin 5 Amps, flush type, 230 / 250 Volts
Supply & fixing socket combination ,6 pin ,15 amps, flush type, multipurpose, 230 / 250 volts , AC with ISI marked
Material & labour for ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified.
Supply and fix DB,double door, SPN 8 way for MCB, 240 volt with 200 amps rated bus bar.
Supply & fixing MCB SPN 32 to 63 Amps 240 volts
Supply & fixing MCB SP 6-32 Amps 240 volts
Material & labour for Lamp holder, PVC/Polycarbonate type with back plate incl 01x LED bulb 09 Watt complete suitable for batten fittings.
Supply & fixing Exhaust fan Metalic body, Heavy duty, AC 230/240 V, of size 300 mm sweep , incl making opening in wall for fixing the exhaust fan with louvers complete all as specified and directed.
Supply & fixing in replacement LED tube light fitting 20W (Double side) including LED lamp 20W with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.
Supply & fixing in replacement LED street light fitting 35 W including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED 6500K and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed including bracket and fixing clamps etc.
Material & labour for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor, FRLS type cable drawn through and including PVC concealed conduit of 20mm in size complete with all accessories including provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire. Note :- Three runs of 6 Sqmm copper wire and one run conduit shall be considered as one unit.
Material & labour for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/revated to earth plate at one end and connected DB by means of nut, bolts etc complete with PCC pit (1:3:6) type GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part I
Material & labour for XLPE UG cable of size 4 Sqmm 2 core to be laid in trenches all as specified and directed
Material & labour river sand in trenches as cable cushioning 8cm below the cables and 15cm above the cable which is to be punned down all as specified and directed. Only punned thickness will be measured.
Supply and laying burnt bricks sub class 'B' using old size bricks laid across the cable in trenches as protection to the cable all as specified and directed.
Supply & fixing in replacement LED street light fitting 120 Watt including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrical to Junction box with 02 Nos of GI Clamps of size 25x6 mm of length 25mm with nuts, bolts and washers complete complete all as specified and directed.
Supply & fixing of new generation, post top, energy saving spun aluminium lanscape luminaries with high power 40W suitable for pole dia 76mm confirming to IP65 Ruby (Clear) of Havells Cat Part LHEVBGP7PN6K040 or equivalent.
Supply & fixing MCB single pole, 240 volts, 6 to 32 Amps in the existing DBs
Supply & fixing MCB DB SPN without Bus Bar suitable for MCBs 2 way all as specified and directed
NATIONAL BUILDERS
BHARAT ENTERPRISES
M/S Kuldip Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .