Installation of Highmast Near Tippu sultan circle and Muslim Khabarstan in ilkal city

Installation of Highmast Near Tippu sultan circle and Muslim Khabarstan in ilkal city

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/ trap/basalt crushed graded coarse aggregates a...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate as per table below ForRCC Column form works Consider 70% of ...

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding ...

Fabrication, Supplying, Erection, Testing and Commissioning of . ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thick...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior ...

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3, Rating and as per IS-13947. 65 to ...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. (PWD Ele SR 2023-24 It No:5.48, P NO:21 of 105)

Supplying and Fixing Moulded case Circuit Breaker (MCCB) PVR the Exisiting wood/panel/Board Using Necessary Screw Bolts Four Pole 100Amps 25KA (PWD Ele SR 2023-24 It No:5.15.1, P NO:17 of 105)

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63Amps (PWD Ele SR 2023-24 Page No. 14 Item No. 5.7.3)

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and (Virgin)PVC insulation sheathed suitable for workin...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/Bends/End-caps of same materials in existing trench as per IS 14930 part -II suitab...

Supplying andfixing of Modular MCB Devices(Tripper)With Breaking capacity of 6kA. 40 A SP (PWD SR 2023-24, Vol-6, It No-5.46.2, P.No-21)

Auto Manual Switch

Hescom Charges & Others