COMPREHENSIVE REPAIR/ REPLACEMENT OF FLOORING, PLUMBING, JOINERY, DADO, INTERNAL ELECTRIC WORKS and MISC WORK IN BLDG NO.285 and CERTAIN BLDG. OF OTHER UNITS UNDER GE DRONACHAL

Amount

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs / blankets, any thickness, including cover fillets

Gl frame work for seamless ceiling of size 605 x 605mm comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of26 mm each with lips of 10.5 mm fixed to the intermediatechannel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Eng-in-charge..

S & F 8mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately)

S & F 10mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall complete all as specified and directed by Eng-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Eng-in-charge.

M & L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc incl. brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed by Eng-in-charge.

M & L for taking down and refixing in same opening size of shutter exc 1sqm and not exc 2 sqm complete all as specified and directed by Eng-in-charge.

M & L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar complete all as specified and directed by Eng-in-charge.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in 1:4 cement mortar complete all as specified and directed by Eng-in-charge.

M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Eng-in-charge.

M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Eng-in-charge.

M & L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Eng-in-charge.

M & L for glazed ceramic tiles in vertical surface 300X 200X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in vertical surface skirting / dedos etc complete all as specified and directed by Eng-in-charge.

M & L for glazed ceramic tiles in vertical surface 300X 600X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in vertical surface skirting / dedos etc complete all as specified and directed by Eng-in-charge.

Demolition of stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Eng-in-charge.

M & L for 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed by Eng-in-charge.

M & L for 18mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Eng-in-charge.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing to give high gloss finish complete all as specified and directed by Eng-in-charge.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing to give high gloss finish complete all as specified and directed by Eng-in-charge.

Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed by Eng-in-charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Eng-in-charge.

M & L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in 1:6 cement mortar and finished even and smooth without using extra cement complete all as specified and directed by Eng-in-charge.

M & L for rendering 5mm thick in cement mortar 1:4 in concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and directed by Eng-in-charge.

M & L of applying two coats of oil bound distamper over puttied surface as above complete all as specified and directed

Preparation of newly plastered surfaces of walls and applying three coats of white wash on ceiling complete.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and directed by Eng-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm and not exc. 4 sqm each and removing from site complete all as specified and directed by Eng-in-charge.

Taking down shutter exc 1 sqm and not exc 2 sqm complete all as specified and directed by Eng-in-charge.

Supply and fixing Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed by Eng-in-charge.

Material and labour for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed by Eng-in-charge.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and lengthcomplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall beacceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

Supply and fixing 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and provision and fixing with and including stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat grill for fixing etc. complete all as specified

S & F anodised aluminium powder coated any colour window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.)complete all as specified and directed by Eng-in-charge.

S & F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Eng-in-charge.

Supply and fixing aluminium handles extruded type of size 125mm, complete all as specified and directed by Eng-in-charge.

Supply and fixing 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete.

Supply and fixing 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cost or extruded sections or cost alumminium alloy complete all as specified and directed by Eng-in-charge.

Supply and fixing 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Eng-in-charge.

S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Eng-in-charge.

S & F stainless steel wire cloth. 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Eng-in-charge.

S & F in repair stainless steel wire cloth. 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Eng-in-charge.

M&L for painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed by Eng-in-charge.

S & F Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.

S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

Supply only fancy type heavy duty stainless steel brackets for fixing of toughned glass partitions etc.

Supply only heavy duty hydraulic floor door spring fixed to floor for heavy toughned glass door including top SS bracket with heavy duty pivot for for fixing of glass door with glass partition .

Supply & fix only fancy type lock for toughned glass door complete all as specified and directed by Eng-in-charge.

S & F long fancy stainless steel handle made out of stainless steel pipe fixed to toughned glass door complete all as specified and directed by Eng-in-charge.

S & F in repair aluminium die cast door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Eng-in-charge.

Supply and fixing light coloured vitreous china wash hand basin white available shape as approved of 550mmx400mm (minimun) on new pre-painted brackets excluding taps but including 32 mm bore waste fittings, brass, chromium plated etc complete all as specified .

Supply and fixing PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10ltrs capacity

Supply only flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed by Eng-in-charge.

Supply and fixing of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type.

Supply and fixing of fancy type chromium plated Bib tap, 15mm bore complete all as specified and directed by Eng-in-charge.

Supply and fixing of CP brass fancy type stop cock with long shank & as concealed type/ angular type .

Supply and fixing PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and directed by Eng-in-charge.

Supply and fixing Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

Supply and fixing Soap dish, vitreous China white, ap?proximate size 160x 160x90mmcomplete all as specified and directed by Eng-in-charge.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S & F 20mm dia tublar towel rail including a pair of bracket with matching specification and size

Supplying and laying of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old pipes complete all as specified

Supplying and laying of 20mm bore CPVC pipes SDR 11 & CPVC SDR 11 brass fittings on walls/ceiling or laying in floors including taking down old pipes complete all as specified

S & F 500 Ltrs capacity Rotational moulded polye?thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling and removing old unservicable tank all as specified

S & F 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Eng-in-charge.

S & F 100mm Cast iron floor trap, with SS grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Eng-in-charge.

Supply & fixing in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes and bed concrete etc complete all as specified and directed by Eng-in-charge.

Supply & fixing in repair Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointingcomplete with fixing bolts complete all as specified and as directed.

Supply & fixing in repair Plastic water closet seat,any colour as available, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete all as specified and as directed.

Supply & fixing in repair Vitreous china half stall urinal flat back, with grating and union for discharge pipe fixed in repairs (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

Supply & fixing in repair Urinal spreader of chromium plated for fixing with 15mm dia pipe complete all as specified and as directed.

S & F in repair light colour vetrious china WHB table top of size 175 x 435 x 410mm (minimum excuding taps complete all as specified and as directed Make - Jaquar WHT0554

S & F in repair vetrious china extended wall hung WC of bowl size 350 x 360 x 575mm including soft close seat cover complete all as specified Make - ARS WHT- 0110

S & F in repair concealed cistern body including syphonic mechanism . Make :- CIB-WHT-31801011X

S & F control plate to concealed flushing cistern Make - Jaquar CIS-CHR-31171019

S & F in repair of brass Chromium plates angle Stop valves of 15 mm bore screwed for 15 mm bore iron pipe or union Make jaquar 29053

S & F in repair waste coupling 32 mm full thread make jaqusr ALD -CHR -705

S & F Bottle trap Make jaquar ALD 769L

S & F soap dispenser with metallic bottle Make jaquar ACN -1137 N

S & F soap dish Make jaquar AQN-7731

S & F corner glass self with bracket Make jaquar ACN -1137

S & F Thumbler Holder Make jaquar AQN-7741

S & F in repair SS Grating 125 mm dia with or without hole

S & F in repair single lever wash hand basin mixer Make jaquar ORM 10051B

S & F in repair PVC connection 15 mm size with nuts of length 600mm, complete all as specified .Make jaquar ALD801B

S & F in repair towel rack chromium plated brass of size not less 60 cm long. Make jaquar AQN 7781

S & F in repair towel ring brass chromium plated Make jaquar 7721

S & F in repair Shower arm Make jaquar SHA-477

S & F in repair wall mixture Make jaquar FUS-29281

S & F in repair Hand shower Make jaquar HSH1739

S & F Swivel mirror Make jaquar CAN-1195 N

S & F Glass shelf 600 mm long Make jaquar CAN-1171 N

Repairs existing aluminium door/ window shutter including frame with completely/partially taking down door shutter and tightening of all screws, replacing including provision of unservicable hinge, handle, lock, aluminium plate & floor door stopper directed by Engineer-in-Charge.

Petty repairs to servicable sensor & fancy plumbing fittings by authorised agent including providing & replacing genuin company manufactured spare parts if required at site complete all as specified and as directed.

S & F in repair urinal sensor fitting accessories including removal of old unservicable sensor fitting from urinal of branded manufacturer matching to existing urinal

M&L for Preparation of old decorated surfaces on ceiling. including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on ceilings complete all as specified and directed.

M & L for preparing old decorated surface of wall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of oil bound distamper over old decorated wall surface complete all as specified and as directed

M & L for preparation of old decorated surface of wall including brooming scrapping down, smoke spot, mass efflorescent, treding oil, greasy spots and stopping nail marks by applying white cement based putty in patches as required and applying two coats of exterior weather proof water base emulsion paint on wall all as specified and as directed.

M & L for complete removal of old existing treatment of wall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, Washing, rubbing down and stopping of distempered and painted surfaces

M & l for applying 1mm thick (average) putty for smooth finish on prepared surface complete all as specified and as directed

M & L of applying two coats of oil bound distamper over puttied surface as above complete all as specified and directed

M & L for preparation of new / old puttied surface of wall and applying two coats of exterior weather proof water base emulsion paint over a coat of primer (Make:- Shalimar - Saktiman, Asian- ACE, Burger - Walmasta or equivalent as approved by GE ) on wall all as specified and as directed.

Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Eng-in-charge.

All as per item No.109 above but on steel surfaces

Taking down carefully copper & aluminum point wiring for light, fan, socket or power complete and making good distrubuted surfaces of walls floors etc. Including switch & socket etc complete all as specified and directed by Engr-in-charge.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-

One light point controlled by one switch.

One ceiling Fan point controlled by one switch.

One exhaust Fan point controlled by one switch.

One 3 pin socket outlet 5 Amps on independent board.

One 3 pin socket outlet on same board.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 4 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/ pressed steel sunken boxes with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 4 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complee all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent.

Supply and fix in repair incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp.(A/C Box) complete all as specified and directed by Engr-in-charge.

Supply and Fix in repair of modular switch single pole one way 6 Amps, ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fix in repair of modular switch single pole one way 16 Amps, ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fix in repair of modular Socket single pole one way 6 Amps, 2 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fix in repair of modular socket single pole one way 16 Amps, 2 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fixing of modular frame plate 4 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fixing of modular frame plate 6 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fixing of modular frame plate 8 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fixing of modular metal flush box 4 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fix of modular metal flush box 6 module ISI marked complete all as specified and directed by Engr-in-charge.

S & F in repair Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed by Eng-in-charge.

S & F in replacement Recess/ceiling mounting as suitable in existing fitting ultra slim 36 W LED 2x2 edge-lit tile in Aluminium Extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as specified and directed.

S & F in repair of 1 x 18 watt LED tube light fitting basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver, LED Decorative luminaire with suitable for lamps LED Light high efficiency LED driver,Optimized heat dissipation for ensuring high LED life span.

S & F 1 x 20 watt Axeon LED tube light fitting surface mounted linear LED batten with polycarbonate housing & integrated electronic driver, LED Decorative luminaire with suitable for lamps LED Light high efficiency LED driver,Optimized heat dissipation for ensuring high LED life span.

S and F in repair incl taking down Ultra Bright LED Pl-L white/warm white, 4 pin with very high efficiency suited for installation in existing 2G11 lamp holders, complete all as specified and directed by Engr-in-charge.

S&F in repair of LED Building security light fitting 1x 25 W new generation energy saving and environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seprate driver compartment with IP 66 protection and impact resistance of IK07 for mounting existing bracket complete including all accessories pre-wired with 3 X 1.5 sqmm single core mutistrand copper conductor cable up to celing rose/ terminal box and proper earthing connection must be provided, all as specified and directed by Engr-in-Charge.

S&F in replacement of LED aviation light luminaires comprising of aluminium housing with polycartboinate enclsoure with 302 nos LED complete all as specified and directed by Engr-in-charge .

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm all as specified and directed by engr-in-charge.

Supply and fixing modular ceiling Fan step regulator, 120W - 2 module electronic step type 240 Volts, ISI marked with valid CML No. and connecting up complete all as specified and directed.

Taking down existing U/S fittings any type any size and Supply & Fix in repair LED 10 watt tube light fitting integrated type, (Length min 2 feet), 240 V, PF >0.90, colour temp 6500K, suitable for surface mounting on wall, multi stranded copper flexible cable 0.5 sqmm Two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as as specified and directed by Engr-in-charge.

Supply and fix in repair of lamp holder , PVC/Poly carbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-charge.

S & F in repair incl taking down LED bulb 9 Watt with very high efficiency suited for installation in existing lamp holders, complete all as as specified and directed by Engr-in-charge.

S & F in repair incl taking down LED bulb 5 Watt with very high efficiency suited for installation in existing lamp holders as indication lamp of colour red,green, complete all as as specified and directed by Engr-in-charge.

Taking down carefully aluminium sub main wiring from the existing casing/caping/PVC conduit all as diretced.

Material & Labour for sub main wiring with two run of 10 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 10 sqmm size PVC insulated unsheathed stranded copper conductor cable drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge..

Material & Labour for sub main wiring with two run of 6 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 6 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge..

Material & Labour for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge.

S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, with 200 A rated bus bar, double door with 100 Amp,25 KA,TP MCCB as incomer (Vertical type double door,100 Amps MCCB rate inclusive) and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCCB* as incomer and SP/TP MCBsas outgoingscomplete all as specified and directed by Engr-in-charge: Make- Legrand/ Seimens/ Schinder/L&T.

Supply and fixing in repair of MCB TPN 40 to 63 Amps, 415 V with thimble suitable for existing wires complete all as specified and directed by Engr-in-charge.

S & F in repair incl taking down sheet metal enclosure for MCB DB, SPN 230 Volts 200 amps rated busbar 8 way double door complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair of MCB single pole with neutral 240 volts 25 to 40 Amps with thimble suitable for existing wires complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair of MCB single pole 6 to 32 Amps 240 V with thimble suitable for existing wires complete all as specified and directed by Engr-in-charge.

Supply and Fix in repair of 100 A MCCB 4 pole, 16 kA breaking capacity, 415 V with suitable thimbles all as specified and directed by Engr-in-charge

Supply and Fix in repair of 125 A MCCB 4 pole, 16 kA breaking capacity, 415 V with suitable thimbles all as specified and directed by Engr-in-charge

Supply and Fix in repair of 160 A MCCB 4 pole, 16 kA breaking capacity, 415 V with suitable thimbles all as specified and directed by Engr-in-charge

Earthing complete with galvanised iron earth plate electrode 60cmx60cmx6mm thick , burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised steel wire 4 mm dia by means of galvanised nuts, bolts, check nuts and washers including excavation and earth work, PCC 1:3:6 type C-2 pit, PCC pit cover 1:2:4 type B-1 with handle, GI protection pipe 15 mm bore light grade and 20mm medium grade GI watering pipe, Funnel , wire mesh etc complete as shown in electrical Plate No.3 of SSR Part-I connected to earthing test point and metal part all as specified including testing on completion complete all as specified and directed by Engr-in-charge.

Note :- Ser item No 01 to 149 to be executed in restricted area. Working hours may be effected due to entry permission by the user. Nothing shall be paid extra to contractor in this regard.

PRADEEP TIWARI CONTRACTOR

City buildcom builders & devlopers

MODI CORPORATION