Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 LAccepted-AOC H NO 283 PHASE 3 KRISHNAPURAM MISROD HOSHANGABAD ROAD BHOPAL MP PIN 462046 | BHOPAL | BHOPAL | MADHYA PRADESH | 462046 | ₹14.6 L Quoted ₹14.9 L | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹16.8 L+₹1.8 L (12.4%)Rejected-Finance LIG 10 VIVEK NAGAR NAVIBAGH BHOPAL MADHYA PRADESH 462038 | BHOPAL | MADHYA PRADESH | 462038 | ₹16.8 L+₹1.8 L (12.4%) | L2 | Rejected-Finance Not Being lowest bidder |
| 3 | L3₹23.0 L+₹8.1 L (54.0%)Rejected-Finance | ₹23.0 L+₹8.1 L (54.0%) | L3 | Rejected-Finance Not Being lowest bidder |
| Sl No | Description | Qty | Unit | M/s logitech solution L1 | PRAGATI ELECTRICALS AND ELECTRONICS L2 | MODI CORPORATION L3 |
|---|---|---|---|---|---|---|
| 1.00 | Modification of the existing Android application, including testing, commissioning, programming, and integration of the existing SCADA system with an SSL-licensed Android-based Smartphone Application, configured and made operational as per the newly allotted static IP address, consisting of a minimum of twenty (20) user interface screens, with user-defined data display, complete in all respects and executed strictly in accordance with the technical specifications, scope of work, approved pipe line drawings, and directions of the Engineer-in-Charge. | 1 | Job | 18,000 ₹18,000 Lowest | 20,000 ₹20,000 | 18,000 ₹18,000 Lowest |
| 2.00 | Repair of the existing PLC panel including: (1) PLC logic programming and configuration — reprogramming or modification of PLC logic, I/O address configuration, and communication setup between PLC, HMI, and GPRS modem (2) Component repair and replacement — SMPS, PLC CPU, input/output cards, pressure and flow switches, actuator I/O connections, GPRS modem, HMI, push buttons, LED and RYB indicators, single phase preventer, selector switches, relays, with proper termination and labeling; (3) Panel rewiring and burnt wire replacement — removal of burnt/corroded wires, installation of new control and power wiring with standard color coding, crimping, ferruling, and continuity/insulation testing; (4) Panel inspection and diagnosis — detailed examination of wiring and components, identification of damaged parts, and preparation of replacement list (5) Testing and simulation — dry run testing of all I/O points, verification of actuator operations, pressure/flow switch feedbacks, interlocks, and full simulation of process sequences for final commissioning. Note: Replacement of any defective components, materials, or items shall be charged and paid separately as per actual requirement. | 2 | Job | 40,000 ₹80,000 Lowest | 50,000 ₹1,00,000 | 70,000 ₹1,40,000 |
| 3.00 | Supply, Installation, Testing of new PLC CPU , Serial Communication RS232/RS485 x 1, Ethernet Port x 1 and re-wiring of the exisiting panel with respect to the required Inputs & Outputs Make: Mitsubishi, Delta | 2 | Each | 45,000 ₹90,000 Lowest | 45,000 ₹90,000 Lowest | 61,000 ₹1,22,000 |
| 4.00 | Configuration and implementation of a new Static IP address for the complete SCADA system, including firewall configuration and port forwarding as required for secure and reliable communication; modification and re-configuration of the existing SCADA Server (01 No.) to operate on the new Static IP; modification of the existing SCADA software in line with the new IP configuration, including updating of all communication settings and parameters; verification, correction, and integration of all SCADA tags to ensure accurate data acquisition, control, and monitoring; reprogramming, modification, testing, and commissioning of 14 (Fourteen) Nos. PLC panels to ensure seamless communication with the SCADA server under the revised Static IP and network configuration; and end-to-end system testing to confirm stable, secure, and reliable communication between the SCADA server, PLC panels, and the SSL-licensed Android-based smartphone application. The entire work shall be completed in all respects, fully functional, tested, commissioned, and operational, strictly in accordance with the technical specifications, scope of work, and instructions issued by the Engineer-in-Charge. | 1 | Job | 1,90,000 ₹1,90,000 Lowest | 2,00,000 ₹2,00,000 | 2,80,000 ₹2,80,000 |
| 5.00 | Supply, Installing,Testing and Commissioning of Ultrasonic Level Transmitter at Pure Water Sump ( for measurement of level in Pure Water ) - including all accessories complete all as specified and directed.
Range : 0-5 meters , Accuracy : 0.5 % minimum ,Supply Voltage : 24V dc,Output : 4-20 mA Make: BANNER// NIVELCO / SIEMENS | 1 | Each Job | 25,000 ₹25,000 Lowest | 25,000 ₹25,000 Lowest | 32,000 ₹32,000 |
| 6.00 | Supply, Installation, Testing and Commissioning of Pressure Switch along with all necessary installation accessories like GI barrel piece, double nipple etc. having range 0-6 sq cm. With Weather proof enclosure complete all as specified and directed.
Make: DANFOSS / SWITZER / SIEMENS | 1 | Each | 5,000 ₹5,000 | 5,000 ₹5,000 | 4,800 ₹4,800 Lowest |
| 7.00 | Supply, Installation, Testing and Commissioning of Flow Switch along with all necessary installation accessories like GI barrel piece, double nipple etc.complete all as specified and directed.
Make: DANFOSS / SWITZER / SIEMENS / RAPID CONTROL / JOHNSON CONTROL | 1 | Each | 2,500 ₹2,500 Lowest | 5,000 ₹5,000 | 4,500 ₹4,500 |
| 8.00 | Supply, installation, testing and commissioning of 10 mm dia Brass / SS, direct Acting / Diaphragm tpye pilot operated Solenoid Valve for air release with manual bypass arrangement along with all necessary installation accessories like gate valve, barrel piece, double nipple, elbows/bends etc suitable for line pressure of 4 kg/sqcm complete all as specified and directed.
Make: AVCON/ ROTEX/ DANFOSS/ SIEMENS/ SWITZER | 1 | Each | 2,300 ₹2,300 Lowest | 4,500 ₹4,500 | 4,200 ₹4,200 |
| 9.00 | Supply, installation, testing and commissioning of 25 mm single phase motorised ball Valve for priming and with manual bypass arrangement along with all necessary installation accessories like gate valve, barrel piece, double nipple, elbows/bends etc suitable for line pressure of 4 kg/sqcm complete all as specified and directed..
Make: JOHNSON CONTROLS/ RITE TORK / EMTORK | 1 | Each | 3,200 ₹3,200 Lowest | 5,000 ₹5,000 | 4,650 ₹4,650 |
| 10.00Supply, installation, testing, repair, caliberation, and commissioning of the existing actuator control system, including PLC programming for actuator calibration, uploading, editing, and testing of PLC logic related to actuator operation; replacement of capacitor (4.5 µF), limit switch (NO/NC, 5 Amp), rewiring, soldering, rewinding of burnt motor, repair of worn circular gears and bearings, oil/grease refilling, replacement of expansion and compression springs, mechanical shaft adjustment for correct cam engagement, reassembly, and alignment of actuator with valve to ensure smooth mechanical motion. The scope further includes configuration of PLC input/output modules, safety interlocks, limit switch logic, verification of open/close position feedback and torque settings, mechanical and electrical calibration of actuator stroke and travel limits, functional testing with actuator feedback signals, testing under no-load and full-load conditions, final calibration for auto/manual control operation, and complete testing, commissioning, and handing over of the system in fully functional condition, in compliance with operational standards and as directed by the Engineer-in-Charge. | ||||||
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
22 Jan 2026, 6:00 pmClosed
Shri Ankit Goyal, IDSE
GE Dronachal, Dronachal Top, Neori Hills, Bhopal 462038
REPAIR/ MAINT OF SCADA SYS AND ALLIED WORKS UNDER GE DRONACHAL
2026_MES_746950_1
8956/E8
Open Tender
Civil Works - Others
Item Rate
180 days
BHOPAL
Class-E, Category a (ii) and as per NIT documents
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER DRONACHAL
₹50,000
Yes
25 Apr 2026
2 Jan 2026
24 Jan 2026
2 Jan 2026
22 Jan 2026
15 Jan 2026
2 Jan 2026 - 9 Jan 2026
Modification of the existing Android application, including testing, commissioning, programming, and integration of the existing SCADA system with an SSL-licensed Android-based Smartphone Application, configured and made operational as per the newly allotted static IP address, consisting of a minimum of twenty (20) user interface screens, with user-defined data display, complete in all respects and executed strictly in accordance with the technical specifications, scope of work, approved pipe line drawings, and directions of the Engineer-in-Charge.
Supply, Installation, Testing of new PLC CPU , Serial Communication RS232/RS485 x 1, Ethernet Port x 1 and re-wiring of the exisiting panel with respect to the required Inputs & Outputs Make: Mitsubishi, Delta
Configuration and implementation of a new Static IP address for the complete SCADA system, including firewall configuration and port forwarding as required for secure and reliable communication; modification and re-configuration of the existing SCADA Server (01 No.) to operate on the new Static IP; modification of the existing SCADA software in line with the new IP configuration, including updating of all communication settings and parameters; verification, correction, and integration of all SCADA tags to ensure accurate data acquisition, control, and monitoring; reprogramming, modification, testing, and commissioning of 14 (Fourteen) Nos. PLC panels to ensure seamless communication with the SCADA server under the revised Static IP and network configuration; and end-to-end system testing to confirm stable, secure, and reliable communication between the SCADA server, PLC panels, and the SSL-licensed Android-based smartphone application. The entire work shall be completed in all respects, fully functional, tested, commissioned, and operational, strictly in accordance with the technical specifications, scope of work, and instructions issued by the Engineer-in-Charge.
Supply, Installing,Testing and Commissioning of Ultrasonic Level Transmitter at Pure Water Sump ( for measurement of level in Pure Water ) - including all accessories complete all as specified and directed. Range : 0-5 meters , Accuracy : 0.5 % minimum ,Supply Voltage : 24V dc,Output : 4-20 mA Make: BANNER// NIVELCO / SIEMENS
Supply, Installation, Testing and Commissioning of Pressure Switch along with all necessary installation accessories like GI barrel piece, double nipple etc. having range 0-6 sq cm. With Weather proof enclosure complete all as specified and directed. Make: DANFOSS / SWITZER / SIEMENS
Supply, Installation, Testing and Commissioning of Flow Switch along with all necessary installation accessories like GI barrel piece, double nipple etc.complete all as specified and directed. Make: DANFOSS / SWITZER / SIEMENS / RAPID CONTROL / JOHNSON CONTROL
Supply, installation, testing and commissioning of 10 mm dia Brass / SS, direct Acting / Diaphragm tpye pilot operated Solenoid Valve for air release with manual bypass arrangement along with all necessary installation accessories like gate valve, barrel piece, double nipple, elbows/bends etc suitable for line pressure of 4 kg/sqcm complete all as specified and directed. Make: AVCON/ ROTEX/ DANFOSS/ SIEMENS/ SWITZER
Supply, installation, testing and commissioning of 25 mm single phase motorised ball Valve for priming and with manual bypass arrangement along with all necessary installation accessories like gate valve, barrel piece, double nipple, elbows/bends etc suitable for line pressure of 4 kg/sqcm complete all as specified and directed.. Make: JOHNSON CONTROLS/ RITE TORK / EMTORK
Supply, installation, testing, repair, caliberation, and commissioning of the existing actuator control system, including PLC programming for actuator calibration, uploading, editing, and testing of PLC logic related to actuator operation; replacement of capacitor (4.5 µF), limit switch (NO/NC, 5 Amp), rewiring, soldering, rewinding of burnt motor, repair of worn circular gears and bearings, oil/grease refilling, replacement of expansion and compression springs, mechanical shaft adjustment for correct cam engagement, reassembly, and alignment of actuator with valve to ensure smooth mechanical motion. The scope further includes configuration of PLC input/output modules, safety interlocks, limit switch logic, verification of open/close position feedback and torque settings, mechanical and electrical calibration of actuator stroke and travel limits, functional testing with actuator feedback signals, testing under no-load and full-load conditions, final calibration for auto/manual control operation, and complete testing, commissioning, and handing over of the system in fully functional condition, in compliance with operational standards and as directed by the Engineer-in-Charge.
50mm dia
80mm dia
100mm dia
150mm dia
200mm dia
250mm dia
Supply, Installation, Testing and Commissioning of 50/80 mm dia, single phase, Motor Actuated Butterfly valve with disc material of CI with nylon coating, hand wheel for manual operation and having 02 Nos. limit switches for Open / Close condition and valve position indicator. In built Serial / USB communication Port, In built data logger with memory, In built SD Card, In built bluetooth transceiver with capability of pairing with any android based smart phone to operation open close & download logged data.The mounting shall be direct on valve type. Make: RITE TORK / HASEL HOFENER / EMTORK
Supply, Installation, Testing and Commissioning of 100 /150mm dia, single phase, Motor Actuated Butterfly valve with disc material of CI with nylon coating, hand wheel for manual operation and having 02 Nos. limit switches for Open / Close condition and valve position indicator. In built Serial / USB communication Port, In built data logger with memory, In built SD Card, In built bluetooth transceiver with capability of pairing with any android based smart phone to operation open close & download logged data.The mounting shall be direct on valve type complete all as specified and directed. Make: RITE TORK / HASEL HOFENER / EMTORK
Supply, Installation, Testing and Commissioning of 150/200 mm dia, single phase, Motor Actuated Butterfly valve with disc material of CI with nylon coating, hand wheel for manual operation and having 02 Nos. limit switches for Open / Close condition and valve position indicator. In built Serial / USB communication Port, In built data logger with memory, In built SD Card, In built bluetooth transceiver with capability of pairing with any android based smart phone to operation open close & download logged data.The mounting shall be direct on valve type complete all as specified and directed. Make: RITE TORK / HASEL HOFENER / EMTORK
Supply, Installation, Testing and Commissioning of 250mm dia, single phase, Motor Actuated Butterfly valve with disc material of CI with nylon coating, hand wheel for manual operation and having 02 Nos. limit switches for Open / Close condition, valve position indicator. In built Serial / USB communication Port, In built data logger with memory, In built SD Card, In built bluetooth transceiver with capability of pairing with any android based smart phone to operation open close & download logged data.The mounting shall be indirect type using specialized extended type arrangement of GI pipe / plate of suitable size/thickness, angle irons and indirect mounting adaptors including raising of existing chamber if required so that actuator mounting is at least 12 inches above ground level complete all as specified and directed. Make: RITE TORK / HASEL HOFENER / EMTORK
Supplying , laying / fixing on wall/ panel/ in trench 1100 Volt grade 2 x 1.5 sq.mm. PVC insulated and PVC sheathedarmoured copper conductor cable etc as reqd for following size complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid seperately Make: Finolex/Polycab/Havells
Supplying , laying / fixing on wall/ panel/ in trench 1100 Volt grade 4 x 1.5 sq.mm. PVC insulated and PVC sheathedarmoured copper conductor cable etc as reqd for following size complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid seperately Make: Finolex/Polycab/Havells
Supplying , laying / fixing on wall/ panel/ in trench 1100 Volt grade 6 x 1.5 sq.mm. PVC insulated and PVC sheathedarmoured copper conductor cable etc as reqd for following size complete all as specified and directed:- Note:- Excavation and earth work shall be measured and paid seperately Make: Finolex/Polycab/Havells
Comprehensive maintenance services including any required programming, integration of the existing SCADA system with an SSL-licensed Android-based Smartphone Application, rectification of software bugs, license renewal, and complete servicing of SCADA software, OPC server, and MIMIC panels, along with troubleshooting and repair of existing computer systems and peripherals (PC, CPU, keyboard, mouse, printer, etc.) without any replacement, including necessary software updates, security patches, antivirus installation/updation, and general system upkeep, all as directed by the Engineer-in-Charge, to ensure continuous, stable, and secure operation of the system for the specified maintenance period; the payment for this item shall be released after satisfactory completion of the work.
M&L for replacement and complete testing of single phase Preventor Model 1 :VSP D2 Make - Minilec including taking down old unsv complete all as specified and directed by Engr in charge
M&L for replacement and complete testing of Relay with base 4 C/O /24 V DC . Make LEONE/IDEC including taking down old unsv complete all as specified and directed by Engr in charge
Supply & Fix in repair with complete testing of Relay with base 4 C/O 240V AC . Make LEONE/IDEC including taking down old unsv complete all as specified and directed by Engr in charge
Supply & Fix in repair push button with LED Indicator - 240 V A.C. Colour Red /Green. Make : ESBEE / TEKNIC/TELEMEACHNIQUE including taking down old unsv complete all as specified and directed by Engr-in-charge.
Supply, Installation, Configuration, and Commissioning of Brother DCP‑L2640DW Monochrome Wi‑Fi Laser Multifunction Printer: Supply, installation, configuration, and commissioning of one no. Brother DCP‑L2640DW or equivalent approved, monochrome (black & white) laser multifunction printer with print, scan, and copy functions, automatic duplex printing, 250‑sheet input tray, 50‑sheet automatic document feeder, Wi‑Fi and Ethernet connectivity, mobile printing support (AirPrint, Mopria, Brother Mobile Connect), secure network operation (WEP/WPA/WPA2/WPA3), memory 256 MB, 2‑line LCD display, compatible with Windows/macOS/Linux/Android/iOS, including full functional testing, driver and network setup, demonstration, user training, and commissioning, with minimum 1‑year on‑site manufacturer warranty, all as per the directions of the Engineer‑in‑Charge.
Supply & Fix complete testing of I/O module for Programmable Logic Controller Make :Mitsubishi including taking down old unsv complete all as specified and directed by Engr in charge
Supply & Fix with testing of HMI for Programmable Logic Controller Make :Mitsubishi /Renu including taking down old unsv complete all as specified and directed by Engr-in-charge.
Supply & Fix in repair with complete testing Buzzer - 240 V A.C. Make : C&S / MIMIC including taking down old unsv complete all as specified and directed by Engr-in-charge.
Supply & Fix with complete testing of Electric motor suitable for actuator following size. Make: Ritetork including taking down old unsv complete all as specified and directed by Engr-in- charge.
50/80 mm dia
100 mm dia
150 mm dia
200 mm dia
250 mm dia
Supply & Fix in repair with complete testing of Butterfly valve for the following size. Make AUDCO/VIRGO/L&T/INTERVALVE complete all as specified and directed by Engr-in-charge.
50 mm dia
80 mm dia
100 mm dia
150 mm dia
200 mm dia
250 mm dia
Supply & Fix in repair Capacitor for Actuator suitable for 50/80/100/150 mm dia Motorized Butterfly Valve including taking down old unsv complete all as specified and directed by Engr-in-charge.
Supply & Fix in repair Resistor for Actuator suitable for 50/80/100/150 mm dia motorized Butterfly Valve including taking down old unsv complete all as specified and directed by Engr-in-charge.
Supply & Fix in repair Limit switch for Actuator suitable for 50/80/100/150 mm dia motorized Butterfly Valve including taking down old unsv complete all as specified and directed by Engr-in- charge.
Supply & Fix SMPS input 230 V/AC, Output 24V DC. Make: NHP/TELEMEHANIQUE including taking down old unsv complete all as specified and directed by Engr-in-charge.
Supply & Fix in repair GPRS Modem complete all as required at site. including taking down old unsv complete all as specified and directed by Engr-in-charge.
Supply & Fix in repair 9DB Antenna GPRS Modem including taking down old unsv complete all as specified and directed by Engr-in-charge.
Supply & Fix UPS Battary make Exide including taking down old unsv complete all as specified and directed by Engr-in-charge.
Supply & Fix in repair 1000VA UPS ,with silicon coated maint free battery ,for a minimum period of 6 Hrs electric bakup .Make -Numeric including taking down old unsv complete all as specified and directed by Engr-in-charge.
Supply & Fix in repair MCB 3P 6A including taking down old unsv complete all as specified and directed by Engr-in-charge.
M&L for removing old paint from surface of PLC pannel by scraping,rubbing and making good surface for painting with appling two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. Make: ASIAN/Shalimar/Berger
SCADA Reporting Software for Water Supply Automation: Supply, installation, configuration, and commissioning of SCADA reporting software capable of real-time monitoring, logging, and visualization of water levels, MOV (Motor Operated Valve) open/close status, pump ON/OFF status, and pressure switch signals, with user-defined dashboards, alarm management, trend analysis, historical data logging, and exportable reports. The software shall provide secure desktop access, integration with existing SCADA servers and PLCs, support at least 20 user-defined screens, automatic tag mapping, data acquisition, and control validation, and shall include full installation, configuration, testing, commissioning, and training as per the directions of the Engineer-in-Charge, ensuring seamless operation and real-time reporting for all water supply assets.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.26 MB
GPSC_8956.pdf
Tender Documents • 0.60 MB
PS_8956.pdf
Tender Documents • 0.27 MB
SOC_8956.pdf
Tender Documents • 0.27 MB
BOQ_836436.xls
BOQ • 1.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .