Repairs to cupboard flooring and certain other B and R works at Offrs Md Accn of Comd Hosp under GE P CH Chandimandir

Amount

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing unserviceable tiles from outside of CH (WC) Chm complete all as specified and as directed.

Coloured Vitrified tiles digital 8 to 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

All as per item No 02 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM (1:4) etc complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thick ness in floors aprons etc laid beded and pointed in any mortar complete all as specified and as directed.

Granite (of any type) work 16 to 18mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, windowcills, cooking platforms, vertical surface and like with and including 15mm thick bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and as directed.

Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed.

Taking down chowkhats or frames n. exc 1.5 sqm each (without taking off shutters from the frames) including cutting out holes for taking out holdfasts and filling the same with PCC 1:2:4 (12.5 mm graded aggregate) , forming jamb if required and plastering jamb cill soffits with CM 1:4 full thickness of wall and side of walls if broken upto 300mm each side during dismantling and making good surfaces with preparation and painting the surfaces with two coats of matching colour on outer and inner surface of wall complete all as specified and directed. Note : Rate also includes M&L cost of PCC and bricks if required to make good the surface jambs , plastering and painting with matching shade upto complete satisfaction of Engr-in-Charge

All as per item No 7 above but exc. 1.5 Sqm and n. exc 4 Sqm each

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each and refixing in same opening after resecuring or easing, cutting and adjusting etc complete all as specified and as directed.

Aluminium barrel tower bolt, 150 mm long, extruded section fixed in repairs complete all as specified and as directed.

Cold rolled mild steel butt hinges 100 mm long medium weight fixed in repairs complete all as specified and directed.

Magnetic catch of approved design and pattern and fixed as directed etc complete all as specified and as directed.

Brass locks, grade I for cupboard 4 levers 75mm size of approved design and pattern etc fixed in repair complete all as specified and as directed.

150mm long extruded aluminium alloy handle, fabricated type, anodised etc fixed in repairs complete all as specified and as directed.

Stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and directed.

Powder coated aluminium frames (Thickness of powder coating not less than 50 micron) for doors , windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified (Thickness of section not less than 3.00MM)

Powder coated aluminium window and ventilator shutter made out of hollow extruded aluminium sections as mentioned below with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws/U section to hold glass & wiremesh, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & directed comprising the following :- (a) All rails stiles shall be 83-84mm x 44-45mm, 2.00mm thick

Dismantling of wooden boarding of any description and fixed in any position with screws etc complete all as specified and as directed.

17/18mm thick pre laminated PVC Solid board, pre laminated both side colour as approved by Engr-in-Charge as in cupboard side box,cupboard shutters, shelves and drawers fixed with screws and adhesive (Each Individual part will be measured seprately) complete all as specified and directed.

3mm thick tinted glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm in each pane fixed in repairs complete all as specified and directed.

All as per item No 20 above but 4mm thick frosted glass

Preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of birla white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as specified and as directed.

Preparation of old plastered surfaces of wall and applying one coat of oil emulsion distemper etc complete all as specified and directed.

25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed.

GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking down GI tubing with all fittings etc fixed in repairs complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed.

15mm bore brass CP fancy Type sink mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs, complete all as specified and directed.

Angular stop valves 15 mm dia cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, fixed in repairs, for complete all as specified and directed.

Sinks with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete etc, fixed in repairs, complete all as specified and as directed.

Stainless steel plate rack 900mmx600mm x 200mm deep with plate racks, spoon holder, shelves fixed in repairs etc complete all as specified and as directed.

M/S Gupta and Sons

Gunjan and Gunjan Associates

m/s krishna engineers1

S.R.SHARMA & SONS

M.P. Builders