PROVISION FOR TIN SHED IN PARKING AT CISF BARRACK, KARVANA, TAJ GANJ, AGRA

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (Rate including GST.)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). (Rate including GST.)

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) in coping, including mixed colouring pigment matching to original. (Rate including GST.)

Brick work with cement mortar 1:6 (1 cement : 6 coarse sand) common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level.(Rate including GST.)

Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand). (Rate including GST.)

15 mm cement plaster on brick wall of mix: 1:4 ratio (1 cement: 4 coarse sand) and coloring pigment to match as per original including dismantling old & decayed cement plaster.(Rate including GST.)

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.(Rate including GST.)

Providing Red sand stone drain cover of required size with one face semi dressed over open darins. (Rate including GST.)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.(Rate including GST.)

Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Rate including GST.)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Rate including GST.)

Providing and fixing 4 mm thick ACP sheet over M.S. iron hollow pipe frame with SS Screws.(Rate including GST.)

Providing and laying vitrified floor tiles in different Size of Tile 600x600 mm sqm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.(Rate including GST.)

Providing, fixing and arrangement of 1.50 H.P. Submersible pump crompton greaves brand 100' deep boring 110 mm dia P.V.C. pipe 20 Kg / cm2 and 32 mm dia colomn pipe CPVC (ISI mark) heavy class complete with starter and connecting the same to the existing supply with 3" G.I Pipe, icluding all accessories i.e. Valve, Elbow, Socket, Bend etc upto 15 mtrs.(Rate including GST.)

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade 30mm thick Red sand stone. (Rate including GST.)

Supply of cement Flower Pot 3' dia.(Rate including GST.)

Replacement of 12 Wt. Solar LED Street Light with Inbuilt Battery. (Rate including GST.)

J.D.TRADERS

M/S HARISH SHARMA