8358 REPAIRS TO FLOORING ROOFING FALSE CEILING WATER PROOFING TRAETMENT SANUTARY / BATH FITTINGS/ PLUMBING AT ZOZILA LINES (OFFOCERs / JCOs / ORs MD ACCN) AND ELLIOT LINES UNDER GE (CENTRAL) PUNE

Amount

Taking down shutters area exc 1.00 Sqm but not exc 2.00 Sqm each & removing from site all as directed.

Taking down Shutters of any description area not exc 1.00 Sqm each and refixing in the same opening after carrying out necessary resecuring or easing & adjusting / minor repairs etc all as specified and as directed.

All as per item No 2 above but area exc 1.00 Sqm and not exc 2.00 Sqm each all as specified and as directed.

Taking down Chowkhats or frames area not exc 1.50 Sqm each complete and making good disturbed portion of jambs with PCC 1:3:6 type C-1 using 20mm graded stone aggregates, plastering , finishes as required etc all as specified and as directed.

All as per item No 4 above but area exc 1.50 Sqm and not exc 4.00 Sqm each all as specified and as directed.

Taking down chowkats or frames with shutters (withou taking off shutter from the frame) area not exc 1.50 Sqm each complete and making good disturbed portion of jambs with PCC 1:3:6 type C-1 using 20mm graded stone aggregates, plastering, finished as required etc all as specified and as directed.

All as per item No 6 above but area exc 1.50 Sqm and not exc 4.00 Sqm each all as specified and as directed.

S & F pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified.

All as per item No 8 above but of size 105 x 60mm all as specified and as directed.

M & L for Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregates for filling of pressed steel frame and hold fast block cutting etc complete all as specified and as directed.

Supply and fixing 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 103 ( Part -I) kiln seasoned and chemically pressure treated. complete fixed to chowkats all as specified and as directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

Supply and fixing 35 mm thick 2nd class hard wood factory Made glazed and skelton shutters , open rebated and prepared to receive gauge (Without sash bars of any nos) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solvent cement complete all as shown in drg given on page 176 of SSR 2020 Part-II The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Each PVC door shutter leaf consist of 4 Nos 100mm long MS butt hinges complete all as specified and directed.

S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 180 of SSR 2020 Part-II complete all as specified and directed.

Dismantling aluminium section of any description complete all as specified and directed.

S & F aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S & F powder coated aluminium door shutters (single / double leaf) or partitions with aluminium section weighing 0.55 Kg/RM with incliding 5.00mm thick selcted quality frosted glass for glazing and stainless steel wire cloth 0.71mm dia with width of aperture 1.18mm and 12-18mm thick prelam particle board what ever is ordered including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder quoted aluminium snap beading, screws with necessary gasket / neoprene / rubber packing / beading etc complete all as specified and directed. Note :- Frosted glass to be used incuding engraving / writing letters / logos as directed. The cost frosted glass, stainless steel wire cloth 0.71mm dia and 12-18mm thick prelam particle board shall deemed to be included in quoted rates..

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S & F in repair Door closer (aluminium extuded body section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed Aluminium complete all as specified and directed

S & F 100mm brass 4 Lever mortice lock, vertical type all as specified and directed..

S & F powder coated aluminium window shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/RM etc complete and inclusive of necessary hardware i.e. locking mechanism, handle and including 5.00mm thick selcted quality glass for glazing and stainless steel wire cloth 0.71mm dia with width of aperture 1.18mm including necessary gasket / neoprene / rubber packing / beading etc all as specified and directed. Note :- The cost of glass & stainless steel wire cloth shall deemed to be included in quoted rates.

S & F louvers glass ventillators with partially guaged shutter using 5mm thick x 10cm wide frosted glass strips with following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352

Supply and fixing stainless steel wire 0.71mm nominal dia of wire average width of aperture1.18mm fixed with tinned tacks complete all as specified.

S & F 150mm extruded aluminium alloy powder coated handles fabricated type .

S & F 150mm long Aluminium powder coated barrel tower bolt of extruded section all as specified and directed.

S & F 100mm mild steel butt hinges , medium weight cold rolled complete all as specified and directed.

S & F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed complete all as specified and directed.

Supply and fix in repairs decorative type curtain rod , stainless steel , 25mm dia with not less than 1.00mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

Supply and fixing in repair 300mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed..

Supply and fixing in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm ixed with stainless steel wire staples all as specified.

Supply and fixing in repair 3mm thick fibre glass suitable quality and glazing with suitable epoxy adhesive and at least 06 Nos MS glazing clips per window panes fixed to steel window frames all as specified and hacking out old glass from the frame complete all as specified and as directed.

Supply & fixing 250mm long aluminium alloy powder coated sliding door bolts with hasp and stapple (bolt type and fxing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified.

S & F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Grade Fe-290 Grade E-165 including welding etc complete all as specified and as directed.

M & L preparation of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and as directed.

M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises / out side of defence land complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete and rubbish off the premises / outside of defence land complete all as directed.

M & L for 100mm thickin cement concrete type D-2 , 1:4:8 using 40mm graded aggregate as levelling course / sub base complete all as specified and as directed.

M & L for 50mm thick cement concrete type B-1 ,1:2:4 using 20mm graded stone aggregate as levelling course in complete all as specified and as directed.

M & L for 25mm thick cement concrete type B-1 , 1:2:4 using 20mm graded stone aggregate as levelling course complete all as specified and as directed.

Material and labour Virified Ceramic tiles Double charge light shade (square/ rectangular) polished, of size 600mm x 600mm x 10mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in CM (1:6) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

All as per item No 45 above but in skirting / vertical surfaces over and including 10mm thick baking coat of CM 1:4 in double charge complete all as specified.

Material and labour for Non skid coloured ceramic tiles of size 600mm x 600mm x 10mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

M & L for coloured glazed ceramic tiles of size 600 x 300 x 8 to 9mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.

Material and labour for Non skid coloured ceramic tiles of size 400mm x 400mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

M & L for coloured glazed ceramic tiles of size 450 x 300 x 7 to 8mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid with any mortar etc. complete and rubbish off the premises / out side of defence land complete all as directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L 20-25mm thick machine cut cudappah stone slab for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified

M & L for 50mm thick cement concrete type C-1 , (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

S & F 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete as specified and directed.

S & F 6mm thick asbestos cement two piece adjustable plain wing ridge fixed with L-type or J-type or cranked hook boltscomplete as specified and directed.

S & F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed.

S & F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, bent to shape as required, fixed with self tapping screws as specified and directed.

M & L for rendering 10mm thick in cement mortar 1:6 on brick / concrete surfaces finished the surfaces even & smooth with a thin layer of sagol finish in patches work including taking down old cement plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 in two layers, (5mm thick in CM 1:4 over a coat of 10mm thick in CM 1:4) on brick / concrete surfaces finished the surfaces with sponge finish in patches work including taking down old cement plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M & L preparation of newly plastered surfaces of walls of any description and applying two coats of oil bound distemper over one coat primer over a thin layer of wall care putty complete all specified and directed.

M & L Preparation of newly plastered or unplastered surfaces of wall and applying three coats of white wash all as directed and specified.

M & L Preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of primer all as directed and specified.

Dismantling of boarding, any description fixed in any position with nails i.e. in cupboard shutters, partitions, false ceiling and wall lining etc and similar position fixed with screws complete.

S & F aluminium powder coated snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long with including 8mm thick one side prelaminated Gypsum ceiling board of as approved including applying tree coats of white wash complete with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.

Supply and fixed in repair sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S & F in repair vitreous china squatting pan "ORISSA" pattern size 580mm x 440 mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding if required and including making good to floor, complete all as specified

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover and jet spray etc (excluding flushing cistern and flush pipe) complete connected to drain and including making good to floor, complete all as specified and directed.

Supply and Fix in repairs vitreous china coloured Wash hand basin flat back, size 550 x 400mm white excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete all as directed.

S & F in repairs 15mm bore dia bib taps , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as directed and specified.

S & F in repairs 15mm angle cock , fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15mm stop valve , Long shank concealed type, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints, fitted to steel pipe or union complete all as specified and directed.

S & F in repairs 15mm dia PVC connections with PTMT nuts , length 450mm all as specified and directed.

Supply and fix in repairs 15mm bore dia pillar taps of cast copper with capstan head chromium plated, fancy type, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed.

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Supply and fix in repairs Vitreous China urinal, half stall type, white of size of 465 x 355 x 265mm (minimum), with fixing accessories , fixing plugs, grating and union (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed to walls and connect complete all as directed and specified

S & F in repair Stainless steel plate rack of size not less than 900 x 900 mm made out of sheet grade SS-304 thickness not less than 0.63mm approved quality finish complete all as specified and directed complete

S & F in repair health faucet conforming to Parryware Cat Part No T9803A1 Coral or equivalent make as given in Appdx 'A' with Hose & Hook complete all as specified and directed.

S & F in repair regular white seat cover for EWC neutral, warm & Bright conforming to Parryware Cat Part No E8309 or equivalent make as given in Appdx 'A' complete all as specified and directed.

S & F in repair single lever wall Mixer with Telephonic shower outlet conforming to Parryware Cat Part No G3118A1 or equivalent make as given in Appdx 'A' complete all as specified and directed.

S & F in repair Two-way Bib Cock conforming to Parryware Cat Part No T3534A1 or equivalent make as given in Appdx 'A' complete all as specified and directed.

S & F in repair Two-way Angle Valve conformimg to Parryware Cat Part No T3543A1 or equivalent make as given in Appdx 'A' complete all as specified and directed.

M & L for GI tubing 15mm bore dia medium grade concealed including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors including cutting chases, pinning in brick / concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 including taking up or down old steel water tubing and connections complete all as specified.

M & L for GI tubing 20mm bore dia medium grade concealed including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors including cutting chases, pinning in brick / concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 including taking up or down old steel water tubing and connections complete all as specified.

M & L in repair PVC prelaminated factory made cupboard shutter of 18 mm thick approved colour / shed quality and made from PVC one side prelaminated sheet. The exposed edges shall be sealed with PVC edge beading of SME shed and colour. The shutter shall be fire retardant having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws and one magnetic catcher of aproved quality for each box / cupboard slot, all complete as per direction of Engineer-in-Charge Note : Measurements shall be taken for full body parts differently in Sqm

M & L for cleaning inside of overhead water tank capacity 500 Ltr with due care such that choking of plumbing line can be avoided and endorsing date of cleaning on it and all as specified and directed by engineer-in-charge complete

All as per ser item No 93 above but for capacity 1000 Ltrs complete all as specified and as directed

S & F fixing in repair PVC OH tank cover of same colour of tank made of best quality PVC and fixed in position at any height secured tightly with tank complete all as specified and as directed

S & F 500 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

S & F 1000 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

Suma Construction

R K CONSTRUCTION AND ENGINEERING

M/S NAVNEET S MORDE

KSP ENTERPRISES