Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹37.8 L+₹42,758.91 (1.14%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹38.0 L+₹58,671.81 (1.57%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹39.9 L+₹2.5 L (6.73%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹40.6 L+₹3.2 L (8.61%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹44.7 L
EMD Value
₹89,500
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE (WEST) LUCKNOW PIN 226002 C/O 56 APO
PROVN OF TOILET WITH BATHROOM FOR WOMAN MILITARY POLICE AT CENTRAL COMMAND PRO UNIT ADJOINING TO BLDG NO T-39 AND SPL REPAIR TO BLDG NO P-27 P-28 P-28A P-29 AND P-30 GORKHA REST HOUSE COOK HOUSE SWEEPERS QTRS AND TOILET (CHARBAGH) UNDER GE(WEST) LKO
2023_MES_595629_1
GE/W/LKO/15 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Lucknow
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹89,500
Yes
4 Aug 2023
15 May 2023
14 Jun 2023
15 May 2023
12 Jun 2023
29 May 2023
15 May 2023 - 22 May 2023
Amount
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc in soft /loose soil. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.
M & L Cement concrete in foundations 1 : 4 : 8 type D2 ( using 40 mm graded stone aggregate) , filling and mass concrete complete all as specified and directed.
S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wallself tapping screws complete all as specified and directed.
S&F rolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections ) including distance pieces, cleats etc. conforming to Fe-410-W(Gde.E-250) quality-B complete all as specified and directed.
M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius,Old size bricks built in Cement Mortar 1 : 6 complete all as specified and directed.
M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains, soak well etc and similar articles etc, set in CM 1:4 with plain faces including chamfered weathering throating etc incl necessary form work complete all as specified and directed.
M & L Brickwork with fly ash bricks,Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in Cement Mortar 1 : 4 complete all as specified and directed.
M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L Mild Steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm completed all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M & L for 25mm thick PCC 1:2:4 type B1(using 12.5mm graded stone aggregate) as in leveling course etc. complete all as specified and directed
M & L for providing cement concrete type B-1, 1:2:4, (20 mm graded stone aggregate) including necessary formwork as in copings lintel complete all as specified and directed.
S&F 'E' board everest make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm abd soaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture insturction including demolition of wall and ceiling boards (fibre, pulp,insulation etc ), any thickness, including cover fillets complete all as specified .
M & L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long complete all as specified and directed
M & L for glazed ceramic colour tiles of size (300 x 450mm) x 7-8mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles as in skirting/dados over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed
M & L for Non -Skid Ceramic coloured tiles 7 to 8 mm thick area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry & pointed in coloured cement to match the surface over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
M & L for 10 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M & L for 15mm thick rendering in CM (1:4) on brick work including using integral water proofing compound finished even and fair complete all as specified and directed. NOTE- WPC shall be measured & paid separetly under respective item.
Supply only integral water proofing coumpound conforming to IS 2645 complete all as specified and directed.
M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed
S & F GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and directed
S & F tubing 20mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and directed.
M & L for cutting and chaseing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth complete all as specified and directed
S&F Solid PVC frame (Single Rebated) of size 60mm x 30 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100mm x 8 mm sheet metal CSK screws complete all as specified and as shown on drawing ( Note :- Door frame shall be water proof , termite proof elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.
S&F Solid PVC extruded profile door shutter of 28 mm thick rails and stiles of extruded 71 x 14 mm wide, made of solid PVC extruded profille with a fine homogeneous cellular structure having smooth surface. 5 mm thick PVC foam sheet is laminated on both side with 25 mm rigid PVC sheet) PVC sheet is used as panel. Primeredd MS frame of size 40mm x 20mm is provided for extra strength PVC panel, stiles rails are joined together using solvent cement adhesive. All corners of PVC profile are first mitre cut and then fusion welded complete all as specified and directed.
Material and Labour for 4 mm thick Figured glass pin head type including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F two way bib Tab 15mm bore, fancy type, cast copper alloy, matt chrome finish with wall flange, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make :- Jaquar CAT NO CON-041KN/ Parryware/Hindware
S & F vitreous china wash hand basin white flat back size 550x400mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling,and 32mm dia PVC waste pipe, complete all as specified and directed.
S & F 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve, float and handle including brackets and flushing pipe 32 mm di for low level flushing cistern complete all as specified and directed.
S & F 15mm bore PVC connection 450mm long with PTMT nuts and washer as complete all as specified and directed.
S & F for CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and directed.
S & F 15mm bore, fancy type shower rose, chromium plated complete all as specified and directed.
S&F angle valve 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S & F brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore Three - in - one size complete all as specified and directed.
S & F CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed
S & F C P Towel ring fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed.
S & F Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed.
S & F PVC bath cabinet with looking mirror overall size350X450mm complete all as specified and directed
S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed.
S & F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed by Engineer-in-charge.
S & F Soap dish CP any size complete all as specified and directed..
S & F 450mm long Stainless steel six peg hanger chromium plated as approved by Engr-in -charge complete all as specified and directed.
S & F 100 mm dia PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.
S & F 75 mm dia PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.
S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.
S & F PVC SWR Pipes 110 mm bore single socketed in any length in trenches or in floors walls complete all as specified and directed
S & F PVC Pipes 75 mm bore single socketed in any length in trenches or in floors walls complete all as specified and directed.
M & L for PCC 1 : 4 : 8 type D2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; internal dia of pipe 100mm complete all as specified and directed.
S and F Hard/Rigid PVC waste Pipe with socket, 32 mm bore for WHB complete all as specified and directed.
S & F 150mm long alumunium anodised barrel tower bolts of extruded section complete all as specified and directed
S&F vitreous china water closet pedastal pattern with seat cover white including plastic seat cover (excluding flushing cistern & flush pipe).incl connector etc complete all as specified and directed
Cutting out bricks, in cement built in mortar 1 : 6, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) complete all as specified and directed
M & L for Preparation of new surfaces of wall and applying Three coats of white wash on wall complete all as specified and directed.
M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:6 including demolation of old brick work or stone/ boulder masonry, built in cement mortar completed all as specified and directed.
M & L for brick work with fly ash bricks straight or curved on plan to any radius including demolition of old brick work in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed.
Taking down cement plaster for brick wall including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
M & L for 5mm thick rendering in CM (1:3) on brick wall or concrete surfaces ceiling finished even and fiar complete all as specified and directed.
M & L for provn of roof treatment with polymeric water proofing membrane after taking down existing treatment and removal of waste materils complete all as given below :- (a) Taking down entire existing water proofing treatment on roof and cleaning the roof slab top all as specified and directed. (b) M & L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (c) Applying a coat of oil base bituminous primer @ 0.25 Iitres/sqm and allow to dry. (d)Applying and laying polymeric water proofing membrane of weight not less than 3kg/sqm.. (e) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20kg/sqm. (f) M & L for two coats of aliuminium paint over bituminous surface all as specified and directed.
Complete removal of existing treatment of wall ( any number of layers ) complete all as specified and directed.
M&L 1 mm thick Birla white putty on wall (two or more coats) complete all as specified and directed
M & L for preparation of new plastered surface of wall and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified.and directed.
M&L for preparation of old surface of wall and applying two coats of oil bound distemper complete all as specified and directed.
M&L for preparation of old surface of walls and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of New surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M & L for Preparation of old treated surfaces of wall and applying two coats of white wash on wall complete all as specified and directed.
M & L for Preparation of old treated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M & L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.
M & L for glazed ceramic colour tiles of size (350 x 450mm) x 7mm/ (350 x 250mm) x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles as in skirting/dados over and including 10mm thick backing coat in CM 1:4 including dismantling of old tile complete all as specified and directed
M & L for Non skid ceramic floor tiles, shade as approved size (300 x 300mm) x 7-8mm thick over and including 15mm thick screed bed in CM 1:4 and pointed in white or colour cement to match including dismantling of old tile complete all as specified and directed NOTE : colour and design approved by engineer - in- charge
M & L for coloured vitrified tiles of size 600x600x8-10mm thick as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in CM 1:4 including dismantling of old tile complete all as specified and directed
M & L for coloured vitrified tiles of size 600x600x8-10mm thick in vertical surfaces such as dado/skirting with and incl 10 mm thick backing coat in CM 1:4 including dismantling of old tile complete all as specified and directed.
M & L for Machine cut kota stone slab flooring 20-25mm thick over and including screed bed or bedding layer 20 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of old slab complete all as specified and directed
M & L for Machine cut kota stone slab 20-25mm thick in treads and riser of steps, skirting, dado and pillar etc over and including 10 mm thick bedding layer or backing coat in CM 1:3 laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of old slab complete all as specified and directed
M & L for 18-20mm thick granite stone slab over and including 20 mm thick screed bed in CM 1:4 including cutting, polishing & rubbing and including rounding of exposed edges, fixed as in platforms/window cills etc including dismantling of old slab complete all as specified and directed.
M & L rubbing and Mirror polishing on Kota stone /granite where required to give high hole finish complete all as specified and directed
M&L 75mm thick cement concrete type D2, (1:4:8 ) using 40mm graded stone aggregate) in sub base of flooring/hardstanding including dismantling complete all as specified and directed
M&L for Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,ength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified as directed.
Providing and laying Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed bed bedding layer in CM 1:6 complete all as specified as directed.
Drilling through holes in granite stone for inserting pipes etc not exc. 25 mm dia complete all as specified and directed
S&F in repair Gypsum Board 12mm thick , white prelaminated sett embossed reinforced designer ceiling boards of approved texture at all height laid on hot dipped GI imposed grid with 24mm wide T sec exposed flanges which shall be pestered coated white. The frame work shall comprise of main runner made from 0.33 mm thick GI sheet of size 24x32x300mm and spaced at 1200 mm C/C securely fixed to the structural soffits by approved hangers at 1200mm c/c. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, screw etc. The last hanger at the end if each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runner at 600mm C/C to form 1200x 600 mm modules cross tee longer than 600mm to be supported independently 1200x600 dodules formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be made of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturers instructions and applying two coat of oil bound distemper over a coat of wall care putty complete all as specified and directed.
S&F in repair suspended false ceiling with "E" Board / V-Board grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2 x 2mm (cross ) dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface complete all as specified and directed.
S & F in plaster of paris cornice size not exc 100 x 100 mm design and pattern approved by enginerr in charge including necessary required design form work etc complete all as specified and directed
Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed.
Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed.
S & F in Anodised aluminium powder coating (minimum thickness of powder coating 50 micron) frame for doors, window , ventilator etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S & F Anodised aluminium powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 200 MM 2 Nos in each door, tower bolt 150MM 02 Nos, hinges 100mm SS 3 Nos each leaf,sliding door bolt 300mm 01 Nos,anodised aluminum snap beading( partly fixed with ACP sheet 6 to 8 mm thick and partly with Glass 5mm thick) complete all as specified and directed
S & F Anodised aluminium powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 200 MM 2 Nos in each door, tower bolt 150MM 02 Nos, hinges 100mm SS 3 Nos each leaf, ss wire mesh with aluminium grill powder coated match with door complete all as specified and directed
S&F powder coating anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 02 no. 150mm long handles 02 Nis complete all as specified
S&F Solid PVC frame (Single Rebated) of size 60mm x 30 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100mm x 8 mm sheet metal CSK screws complete all as specified and as shown on drawing ( Note :- Door frame shall be water proof , termite proof elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.
Solid PVC extruded profile door shutter of 28 mm thick rails and stiles of extruded 71 x 14 mm wide, made of solid PVC extruded profille with a fine homogeneous cellular structure having smooth surface. 5 mm thick PVC foam sheet is laminated on both side with 25 mm rigid PVC sheet) PVC sheet is used as panel. Primeredd MS frame of size 40mm x 20mm is provided for extra strength PVC panel, stiles rails are joined together using solvent cement adhesive. All corners of PVC profile are first mitre cut and then fusion welded complete as per direction of Engineer-in-Charge.
S&F Framed work such as Anodised aluminium grills,(anodised transprant or dyed to required shade according to IS 1868 with minimum anodic coating off grade AC 15 ) of approced design/pattern with approved standard sanction and fixed to the existing window frame with c.p brass /stainless steel screw @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete all as per direction of engr in charge
S & F in repair kitchen cabinet &CB shutter with frane and shelves made of solid upvc foam profile withhomogenoud fine cellular structure having smooth outer integral skin having 45mm width and 18 mm thickness as vertical & horizontal stiles , joints are made and shall be fixed to walls using required size sheet metel screw and solvent adhesive vertical and horizontal profile made of UPVC profile frame of size 35mm x 17mm. the panel shall be filled with accucel polank profile of size 250mm width and 6mm thick complete all as specified by manufacturer instruction and complete all as specified and directed
S & F auto concealed hinges of size 103mm x 64mm x 28mm suitable for cabinet and wardrobe complete all as specified and directed by Engineer-in-Charge.
S & F 100mm size Stainless steel fancy type handle complete all as specified and directed.
S & F 100mm size Stainless stee hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F Stainless steel ( GD 304) wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.
S & F tinted glass 4.8 mm thick, ordinary quality and glazing with oil putty in squares n exe 0.5 sqm in each pane.complete all as specified and directed
S upply only ACP sheet fixed in aluminium frame complete all as specified and directed
S & F Sheet glass 4.8 mm thick ordinary quality and glazing with rubber bedding etc in suqares exc 0.5 Sqm in each pane complete all as specified.and directed.
S & F 200mm long alumunium anodised barrel tower bolts of extruded section complete all as specified and directed
S & F stainless steel Butt hinges "medium weight" steel 100mm size complete all as specified and directed
S & F alumunium handle fabricated type anodised 200mm long complete all as specified and directed
S & F Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate for cupboard /cabinet shutter complete all as specificed and directed
S & F aluminium body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed
S & F in repair fancy type Stainless steel pipe 25mm dia of approved shade including SS bracket/wall to wall including latto on each end complete all as specified and directed.
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for shelves, lintels etc complete all as specified and directed
M & L for RCC 1:2:4, type B1 using 20mm graded stone aggregate in RCC lintel, shelves, hold fast blocks etc. with necessary form work complete all as specified and directed
M & L for Mild steel TMT bars 6 to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipss complete all as specified and directed.
M & L for 100 mm thick PCC type B-2, 1:2:4 (40mm graded stone aggregate) as in platform including finishing top even and smooth without using extra cement including demolition of PCC complete all as specified and directed.
M & L for PCC 1:2:4, type B0 as in padding or levelling coarse for filling undulations or depression on roof and for platform for mounting service tanks complete all as specified and directed
M & L for providing cement concrete type B-1, 1:2:4, (20 mm graded stone aggregate) including necessary formwork as in copings complete all as specified and directed..
M & L for 75 mm thick PCC 1:3:6 type C (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long, including demolition of cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and directed
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling asbestos cement/PVC sheet (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
M&L pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including dismantling asbestos cement/PVC sheet ridge complete all as specified and directed. complete all as specified and directed.
M&L structural Steel work in tubular trusses trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections ) including distance pieces, cleats etc. conforming to Fe-410-W(Gde.E-250) quality-B including special shaped washer etc complete using one or more tubes or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 including dismantling of old mild steel complete all as specified and directed.
M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M & L for prepration of old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S & F in repair stainless steel kitchen plate rack made out of 1.00 mm thick stainless steel of size 900 x750x250mm including screws and weight not less than 5.00 Kg complete all as specified and directed.
S & F in repair for GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and directed
S & F in repair for GI tubing 20mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and directed.
S & F in repair PVC (SWR) Pipes 75 mm bore single socketed in any length in trenches or in floors complete all as specified and directed.
S & F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F PVC(SWR) 110mm dia bends any radius complete all as specified and directed.
M &L for PCC 1:4:8 type D2 Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested internal dia of pipe 150mm complete all as specified as directed.
S & F in repair PVC (SWR) bends any radius 75 mm size complete all as specified and directed.
S & F in repair 100 mm dia floor trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.
M & Lfor oval type wash hand basin over fixing granite slab including cutting grinding and polishing of edges in required shape and design complete all as specified and directed.
S & F in repair light coloured vitreous china WHB oval shape of 550mm x 400mm (minimum) on new bracket excluding taps wast china and plug including brackets coupling, waste pipe etc complete all as specified and directed.
S & F in repairs vitreous china wash hand basin white flat back size 550x400mm incl new bracket suitable for fixing of WHB CP waste coupling waste pipe complete all as specified and directed.
S&F in repair of vitreous china water closet pedastal pattern 'p" or 'S ' trap with seat cover white and wc connector to fit out going pipe (excluding flushing cistern & flush pipe).complete all as specified and directed
S&Fixed in repair of vitreous china squatting pan Orissa pattern long pan size 580 x 440mm white withintegral foot rest including "P or S trap including connector (excluding flushing cistern & flush pipe).complete all as specified and directed
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,bore 32 mm overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed
S & F in repair CP Brass centre hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed.
S & F in repair CP Brass kitchen sink mixer for mixing hot and cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore pipe size complete all as specified and directed.
S & F in repair PVC double syphonic action type flushing cistern, low level white with inlet ball valve, float and handle , flush bend pipe including brackets complete all as specified and directed.
S & F in repair 15mm bore PVC connection 450mm long with PTMT nuts and washer complete all as specified and directed
S & F in repair for CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and directed
S & F in repairs 15mm bore, fancy type shower rose, chromium plated complete all as specified and directed.
S & F in repair for 15 mm bore CP pillar taps fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all as specified and directed
S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed
S & F in repairs stop cock (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed of 15mm bore complete all as specified and directed.
S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed
S & F in repairs C P Towel ring fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed.
S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats.complete all as specified and directed
S & F in repair PVC bath cabinet with looking mirror overall size350X450mm complete all as specified and directed
S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed
S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed
S & F in repair Soap dish CP any size complete all as specified and directed..
S & F in repair 450mm long Stainless steel six peg hanger chromium plated complete all as specified and directed
S & F in repair stainless steel kitchen plate rack made out of 1.00 mm thick stainless steel of size 900 x750x250mm including screws and weight not less than 5.00 Kg complete all as specified and directed
M & L Health faucet (ABC Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flaxible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.
S&F in repair two way angle valves/Bib tap 15mm bore, fancy type, cast copper alloy, matt chrome finish with wall flange, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make :- Jaquar CAT NO CON-041KN/ Parryware/Hindware
S & F for rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position all as specified capacity 1000 ltrs including dismantling of old tank complete all as specified and directed.
S & F for rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position all as specified capacity 500 ltrs including dismantling of old tank complete all as specified and directed.
S & F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.
S F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) l (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. spreader complete all as specified and directed.
M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for One light/fan point controlled by one switch. (NOTE: Switch and socket to be measured and paid for separately)
All as per item No 158 above but on the same board with other switches complete all as specified and directed
All as item No 158 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board.
All as per item No 158 above but for call ball /buzzer point controllled by one bell push complete all as specified and directed
S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed
S & F switch piano flush button single pole one way 15 Amps ccomplete all as specified and directed
S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed
S & F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and directed
S & F ceiling rose surface bakelight two to three terminal complete all as specified and directed
S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed
Supply and fixing in repairs LED lamp 7/9 watt, complete all as specified and as directed. Make:-Havellswith Cat Part No LHLDEUEEML8R007,/ Surya cat no 9W NEO MAXLED LAMP /Make C&S Chandra seeies with Cat Part No LLTHPLEEDLAMP7WB22BULB
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/ Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/Bajaj LED batten BCLAB 20W WH LED P
S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Make philips Green line smart cat no BRP042 LED 25 CW SLE S1 PSU GR P4210/ Bajaj Edge nxt LED cat no ENXT P 24L WH CR PC SD/ Eveready Mini might cat no LED SL025157-02
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW
M&L for two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate) complete all as specified and directed by Engr-in-charge.
S&F in sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’) complete all as specified and directed by Engr-in-charge.
S&F in sheet metal enclosure for DB’s when MCB, to be used, SPN, 8 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’) complete all as specified and directed.
S&F MCB SPN 32 to 63 Amp 240 volts 10 KA breaking capacity complete all as specified and directed.
S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and directed
Supply and fixing of heavy duty metal body exhaust fan single phase 230/240 volt of size 300 mm sweep including holes of suitable size grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connetion with twisted copper flexible wire 23/0.076mm, complete all as specified and directed.
S & F water heater storage type electric BEE 5 star rated of capacity 25 ltrs to operate on 230 volt AC, vertical type, mild steel inner tank including 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15 mm, 450 mm lenght & suitable plug top of 16 Amp complete all as specified and directed.
Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.
Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum condector served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 10 Sq mm 2.0 core stranded condector nominal cross section all as directed by Engr - in - Charge.
M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed
Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and directed
M & L for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 5 of MES SSR Pt-I 2009 print and as directed.
Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, and making good the disturbed surface of walls and floors etc complete all as specified and directed
Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls complete all as specified and directed
Taking down carefully copper/aluminium sub main wiring/ service connection including teak wood batten/ conduit and making good the disturbed surface of walls as directed.
One socket outlet point 5 Amp on an independent board complete all as specified and directed
S&F bell push single pole one way 5 Amp socket outlet point on an independent board complete all as specified and directed
S&F Call bell AC single pole 230 Volts Ding dong complete all as specified and directed.
S&F fan regulator electronic, socket type, 230 volt ceiling fan fixed in exiting board and conection complete all as specified and directed
S & F MCB DB TPN 4 Way (Vertical Type) double door, for mounting, MCBs, isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar , DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way complete all as specified and directed. The DBs shall be of IP 42 protection class.
S&F in repairs MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA, complete all as specified and directed
S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)
S&F in replacement sheet metal enclosure forwith socket plug top and MCBs with two pin and earth plug and socket complete with one single pole 20 Amp MCBs complete all as specified and directed.
M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25 mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directed. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)
S&F in repair super bright LED (2X2),36 W, 6000 K recess mounting with high efficent LED source all as per specified and directed.Make ECOLINK cat part no.: RC340B LED36S -6500 L60W60 PSU OD ELP/Havells Cat No VENUS NEO 2X 2 36WLED 857/ Bajaj SKYLUX GZI SERIES-RECESSED cat No BZRSQL 36W GZi WH
S& F in repair Decorative wall light fixture wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or / Havells decorative model Floretine WL 1LS B22 SS PPCP cat no LHFOAJE1TN1I060 ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)/Jaquar lighting
Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Make: Philips Vista glow ordering code : WT140W LED7S NW PSU S1 PC./ Bajaj wee plus cat no BIBWP 6W LED
Taking down PVC fresh air /exhaust fan or metal body exhaust fan of any size and refixing it on site or new Loction complete all as specified and directed
Taking down care fuly ceiling fan of any size and refixing it on site or new Loction after repair ,oiling,greeing painting and writing MES No complete all as specified and directed
Taking down electric meter and refixing on new board after rewiring in replacement of unservicable wire complete all as specified and directed.
M/S RAJ INTERIORS
M/S Reliance Construction
abhinish traders
ANIL CONSTRUCTION
QUALITY CONSTRUCTIONS CO
M/s Sudhir Enterprises
M/S S S A ASSOCIATES
EVEREST CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .