Provision of Internal and External Electrification to the Newly Proposed Centenary memorial Hall and full Statue for Periyavar Ilayaperumal at Chidambaram in Cuddalore District

Amount

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connectione and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (4 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Supply and fixing of fancy glass shade and 7W / 9W LED bulb. (Make: Philips/Havells /Equivalent)

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamp with side plates and cross arm of size 450mm (18"). (Make: Havells/Crompton /Usha / Equivalent).

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18"). (Make: Havells/Crompton /Usha / Equivalent).

Supply and fixing of single box type 4'20W LED fitting with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting .(Make: Philips/Havells /Equivalent)

Supply and fixing of 4'22W Twin box type LED fitting with 2Nos. of 20w crystal glass LED tube with TW round block on wall or ceiling with tubes and PVC unsheathed copper leads from terminal to the fitting. (Make: Philips/Havells /Equivalent)

Supply and fixing of 4'22W Twin box type LED fitting with conduit pipe suspension from the ceiling with 2Nos. of 20w crystal glass LED tube with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting. (Make: Philips/Havells /Equivalent).

Supply and fixing of single box type 4'20W LED fitting with conduit pipe suspension from the ceiling with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting .(Make: Philips/Havells /Equivalent)

supply and fixing of 10 W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. (Make: Philips/Havells /Equivalent)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.(Make: Philips/Havells /Equivalent) (SD-535 )

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supply and fixing 10W post top of lantern Gate light fitting with necessary connections. Make: Havells / equivallent (Make: Havells/equ.)

Supply and fixing of Garden foot path lights with construcion of masonary pedestal with necessary connections. Make: Havells / equivallent (Model:MINIMOUNTBL10WLED857PSYMTOPMMAS)

supply and fixing of 5 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of Imperial Mini 50W Led Post top with LED (Higher end) with suitable MS clamps for LED light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour . (Make: K-LIGHT/ Havells / equivallent )

Supply and fixing 30W Navi Bollard focus light fitting around statue with necessary connections. Make:Klite/ Havells / equivallent (Model Name:K-Lite ID: 4286 Navi Bollard 30w Led/IP 65 Holder)

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End.

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 450mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 450mm (18") sweep (light duty) AC exhaust fan.

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Renewal by Supply and fixing of 1000 watts automatic Electric Water Heater (Venus/Racold make) of 25 litres capacity suitable for 230V 50 c/s AC supply on suitable MS Clamps with 3 core flex wire but without plumping connection .(Make: Magma Plus/Venus /Equ.)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End. .

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal door) with 1 no. 100 A 4 P Isolator as incoming and 2nos. 63A TP MCB ,3nos. 32A TP MCB,9Nos 6A to 32A SP MCB as outgoing with suitable cable end box on wall with earth connection only. Higher End

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal door) with 1 no. 63 A 4 P Isolator switch as incoming and 5nos. 32A 3P MCB ,9nos. 6A to32A SP MCB, as outgoing with suitable cable end box on wall with earth connection only. Higher End (kitchen)

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P Isolator switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End (power)

Supply and fixing of Fabricated street light control panel of size not less than 4.5' x 3' x 1.5' made out of 16SWG CRCA sheet steel to be mounted on a suitable concrete pedestal with necessary angle iron framework with following provisions 1) Supply and fixing of 63A Four pole MCB in suitable sheet steel enclosure (for Street Light Control) 2) Supply and fixing of digital weekly programmable timer switch with shortest switching time of 1 minute to turn on/off the lights. 3) Contactor of 63A rating 1No. Supply and fixing of Vertical type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door type (Metal) with IP42 protection with 1No. 63A Four Pole MCB as incoming, 6Nos. 32A 2 Pole MCB, as outgoing on suitable angle framework with earth connection complete. The MCB DB, MCB's and contactor should be Legrand/ Hager make only. All the doors should be earthed with suitable flexible copper leads and provided with suitable locking arrangement and sloping canopy on top with rubber beedings to ensure water tight arrangements (DATA-14).

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade insuitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of of 2.5 sq.mm copper wire and making good of the con cealed portion with suitable colour. (To Computer Set Plug & 15A Plug)

Supply and run of 2 of 4 Sq. mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of of 4 sq.mm copper wire and making good of the concealed portion with suitable colour . (AC+LDB+16A)

Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection ofof 6 sq.mm copper wire and making good of the concealed portion with suitable colour .(32AFP)

Supply and run of 4 of 10 sq. mm (140/0.3) PVC insulated S.C unsheathed Cu. Conductor of 1100V grade in suitable 40mm (1½”) PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion with suitable colour. (63A -kitchen)

Supply and laying of 2x10 sq.mm PVC armoured LTUG cable through 32mm (1¼”) dia GI pipe in a trench to be excavated at a depth of 0.75 meter putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good by road crossing.

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good

Supply and laying of 2 x10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clarnping of 3 1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and clamping of 2x10sq.mm PVC LTUG armoured cable through 32mm (1¼”)dia G.I pipe on post or on wall with MS Clamps.(gate light)

Supply and fixing of brass cable gland for 3 1/2 x 50 sq.mm. PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 x 25 sq.mm. PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection.(

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply erection, Testing and commissioning of 1.5 TR split type 3 star rated AC units fitted with hermetically sealed Air compressor with R22 refrigerant air cooled condenser, fan etc. and 1 No indoor Hi wall mounted 1.5 TR capacity evaporator unit complete with cooling coil, blower motor and connected accessories, control etc chord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V + 10% 50Hz sinle phase AC supply. (Make - Carrier/ OGeneral/ Daikin/ Toshiba) (SR)

Supply and Installation of 4 KVA Electronic Voltage stabilizer Suitable for 1.5 tons capacity split type air conditioner with 3 minutes time delay and low/high voltage cut off switch (Wall mounting) with neccesary wire connection.(SR). (Make:V-guard /Eq)

Supply erection, Testing and commissioning of 2.0 TR split type 3 star rated AC units fitted with hermetically sealed Air compressor with R22 refrigerant air cooled condenser, fan etc. and 1 No indoor Hi wall mounted 2.0 TR capacity evaporator unit complete with cooling coil, blower motor and connected accessories, control etc chord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V + 10% 50Hz sinle phase AC supply. (Make - Carrier/ OGeneral/ Daikin/ Toshiba) (SR)

Supply and Installation of 5 KVA Electronic Voltage stabilizer Suitable for 2.0 tons capacity split type air conditioner with 3 minutes time delay and low/high voltage cut off switch (Wall mounting) with neccesary wire connection.(SR). (Make:V-guard /Eq)

Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit) (SR)

Supply and fixing of MS stand for fixing outdoor unit(SR)

Supply and fixing of 1" PVC water drain pipe line on wall with suitable clamp and insullation as required (SR).

g].BASE FRAME: The base frame should be fabricated with MS channel of rigidly welded constructed for mounting the generator set. The engine and alternator should be coupled by suitably designed diaphragm type flexible coupling with guard and mounted on the base frame with proper alignment. The supply of generator set includes loading, unloading and transportation charges. h]. Supply of maintenance and operating manual with list of engine parts and alternator parts. j]. Erection Testing and Commissioning BATTERY: 25 plate 180 AH 12V battery with one set of connecting leads of necessary Copper cable with sockets etc MANUALS & DOCUMENTATION : Operation and maintenance manual for engine, maintenance manual for alternator, engine test certificate, alternator test certificate, circuit diagram for control panel, DG set test certificate, CPCB compliance label fixed on canopy. Supply of ACOUSTIC ENCLOSURE suitable for 62.5KVA Diesel Generator set. The acoustic enclosure should be free standing floor mounting type with modular construction with the provision to assemble and dismantle easily and designed to suit all weather conditions The construction details / specification: Acoustic Modules: Outer body: 2mm thick CRCA sheet Door: 2mm thick CRCA sheet Inner surface:0.8mm thick GI perforated sheet / Perforation area should be > 2 / 3 of total area Insulation:100mmthickRockWool (Density: 65kg / cub.m or as approved by competent authority) to suit CPCB norms Skeleton structure Channels: should not be less than ISMC75 and ISMC 100. Cleats: should not be less angle 40x6mm and 50x 6mm. The sheet metal competent shall be pre-treated by seven tank process. The joints should be designed in such a way the airborne noises are prevented. For larger panels, special care should be taken to prevent deformation. Adequate ventilators should be provided so that the generator performance is not affected and also the temperature inside is limited.The maximum permissible sound pressure level should be as per the norms prescribed by the central Pollution Control Board/ State Pollution Control Board / Competent Authority concerned or should be 75db(A) at 1meter from the enclosure surface, whichever is advantageous to the department The emergency stop and suitable meter with digital display to indicate inside ambient temperature of the enclosure should be available on the enclosure panel. The enclosure should be only poly polished based coated inside and outside The enclosure provided shall be duly approved by the Engine Manufacture of the Engine provide for Diesel Generator sets mounted inside and should be to the satisfaction of Inspection / Testing Authority concerned.

Erection testing Commissioning and handing over of Gen set:- Providing suitable concrete foundation with cement concrete 1:2:4 with sand cushion all around the foundation erection of 62.5KVA Generator set over the existing foundation and erection of Generator set with proper alignment of Suitable size L5150XW3200XH1200mm.

Supply and Installation of exhaust piping of sufficient length with suitable MS pipe so as to extend outside the Generator room with necessary thermal insulation (SR)

Providing fuel oil to run the set for 8 hours on load testing and commissioning using water rheostat or suitable loading elements [Local Market Rate]

Supply of tools such as 1no. 15” cutting pliers, 1no. 6” screw driver, 2no.9” screw drives, 1set of 6nos, double ended spanners, 1no. Adjustable spanner, 1no. ½ Ib hammer, 1no. Spanner for removing engine oil plug, 1no. Line tester required for the for the maintenance and operation of the generator set -1set

Supply and demonstrating the safety accessories a.1mtr x 1mtr x ½” 11KV rubber mat – 2Nos. b. One set of 4 Nos 9 liter fire buckets with c. First aid box with medicines – 1No. d. 11KV rubber hand gloves – 2 pair e. 2 kg capacity dry powder type fire extinguisher - 4Nos. f. hand operated pump to transfer fuel from standard barrel to fuel tank – 1No. g. First aid chart in Tamil and English - 1No. h. Battery water acidity tester -1No. (Ashok LeylandKirloskar/Cummins Make) (SR).

Preparation of site plan, physical layout, electrical line schematic diagram in 10 sets. Getting drawing approval from CEIG, preparation of completion report, rectification report and arranging CEIG’s inspection and obtaining safety certificate. Preparation of one set of approved drawing and a copy of safety certificate in a neat frame work to be fixed in the generator room – 1set.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Supply and fixing of 32 A FP MCB in 4way sheet steel enclosure in flush with wall and earth connection. (Make: Legrand (MDS)/Hager (L&T)/ Equivalent).

Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete

Supply and fixing of 100A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with MS cable entry boxes and with PWD earthing

Supply and fixing of 3 phase 100 A aerial fuse unit for 3Nos. 100A fuse units (500V) on suitable MS sheet covered with 6mm thick hylum sheet on suitable angle iron frame work the tapping pole with necessary clamps.

Supply and fixing of 100 Amps Four Pole RCCB/ELCB 30mA sensitivity in sheet steel enclosure in flush with wall with earth connection. The ELCB & Enclosure should be of Legrand/Hager make.

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

supply and installation of high fidelity2 way speaker system with rms ,impedence of 8 ohms 100v line matching with power tappiong of 60 w-30w-15w frequency response 80 -20000hz make &model:ahuja/equilant

supply and installation of 400 w amplifier which operates on ac&dc power with 7mic &2 aux inputs outputs taps of 4&8 ohm ,70v&100v and frequency response of 50-15000hz in built digital player make &model:ahuja/bosch/equilant.

supply and microphone which consists of long length goosenneck microphone with on/off switch, indicator ,built in speaker with phantom supply unit . make &model studio master flex 3 with base /equivalent

supply of microphone which consists of wireless microphone with on/off switch ,indicator ,make&model ;studio master /ahuja/equivalent

supply and installation of microphone with stand shaft make &model:ahuja 3200 with dgn stand /equivalent.

suipply and fixing of 12 u steel audio/video equipment moveable rack with consists of all equipment and other accessories with front back glass door lock/key facility.

supply and run of 2core of 1.5 sq.mm speaker cable in 19mm existing pipe on wall and ceiling and making good of concealed portion with suitable colour.

supply and run of 3core of 1.5 sq.mm pvc copper microphone cable in existing pipe on wall and ceiling and making good of concealed portion with suitable colour.

supply and installation of 8channel NVR-(Network video recorder).8channel ip cameras can be connected . 8 channel ip cameras can connected.make:Hikvision/Equivalent

Supply and fixing of 4MP Fixed mini bullet Network camera.High quality imaging with 4 mp Resolution.Excellent low light performance via powered-by-dark fighter technology .efficient H.265+compression technology clear imaging;Hikvision/equivalent

Supply and installation of switch 8 port POE Switch for cctv ip camera with accessories.Make:Hikvision/equivalent

Supply and installation of 2TB HDD (Hard Disk drive).Make :Western digital /equivalent

Supply and installation of 32''LED TV Make:Sony/Samsung/equilent

Supply and installation of 9U Metal Rack with front class door ,lock and key ,also with power Manager

Supply and run of UTP Cat 6 cable through suitable pipe in the wall/ceiling with necssary connection.Make;D Link

Supply and laying of ISI approved 20 MM PVC/Casing rigid pipe on wall and ceiling with painting of suitable colour

Add GST 18%

RR & CO (BID ID -1140555)