SPL REPAIR TO BLDG NO P 173 (PHYSIOTHERAPY DEPT) OF MH SECUNDERABAD UNDER AGE B/R (S) NO I OF GE (SOUTH) SECUNDERABAD

Demolition of cement concrete (un reinforced ) of any description and in any position not otherwise specifically provided including removal of existing roof treatment of any type and any description complete all as specified and directed.

M&L for 40mm thick plain cement concrete type B1(1:2:4) ( using 20 mm graded crushed stone aggregate) as in padding (level course) on roof finishing cement concrete surface even and fair complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound will be measured and paid separately under relevent item

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

Material and labour for Water Proofing Treatment with APP based Standard Membrane over PCC padding in approachable roof with the following courses of treatment : (a) Apply bituminous primer ( IS 3384 ) @ 0.30 Kg per Sqm of the surface area including cleaning the surface complete all as specified and directed. (b) Apply APP plastomeric bitumen based water proofing membrane polyester reinforced (3.50kg /Sqm ) with 10 cm overlaps and torch bonded at joints including surface preperation before and after application of treatment as per manufacturers instruction complete all as specified . (c) Applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over Bitumen surface complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F Rolled sections of grade Fe 410W (Gde E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

Dismantling AC corrugated or semi corrugated etc sheets in roof coverings complete all as specified and as directed.

M&L for Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided including floor finishes complete all as specified and directed.

M&L for PCC (1:3:6) type C2 ( using 40 mm graded crushed stone aggregate) as in plinth protection of average 75mm thick including finishing cement concrete surface fair and even complete all as specified and directed .

M&L for 40 mm thick plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as below floor finish complete all as specified and directed.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed

M&L for 10mm thick vitrified light shade doubly charged polished ceramic tiles (square/ rectangular),area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L for 10mm thick vitrified light shade doubly charged polished ceramic tiles (square/ rectangular),area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm , in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed

M&L for Non - skid Ceramic jointfree tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

Dismantling of stone slab of tiles of any description laid bedded and pointed in any motar complete all as specified and as directed.

M & L for granite work of any type 18-20mm thick ( of any type) work table rubbed & polished in steps , jambs , pillar, widow cills, cooking platforms and laid over 15mm thick screed bed or bedding in layer of in CM 1:4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, complete all as directed and as specified.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement 20mm screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of brick work or stone/boulders masonry built in Cement Mortar or cement lime mortar complete all as specified and as directed.

M&L for Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) set in CM (1:6) complete all as specified and as directed.

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick in type C-1 1:3:6 (using 20mm graded crushed stone aggregate) (with plain or interlocking joints as directed) setting in mortar 1:4 in walls complete all as specified and as directed.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 5mm thick in cement mortar (1:4) with WPC over a layer of 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling,chajja,roof projection etc finished even and smooth without using extra cement.complete all as specified and as directed.

M&L for prepartion of new plastered surfaces on wall and applying two coats of oil bound distemper over a coat of cement primer including 3mm thick in (two coats) wall care putty complete all as specified and directed.

M&L for complete removal of existing wall treatment of old surfaces and applying two coats of oil bound distemper over a coat of cement primer including one coat of 3mm thick wall care putty complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of surfaces incl filling all cracks with approved crack filler and applying two coats of exterior emultion weather proof paint complete all as specified. Note : Weather proof paint should be applied by roller brush only.

M&L for preparation of new plastered surfaces on wall and applying two coats of exterior emultion weather proof paint over a coat of primer including one coat of 3mm wall care putty complete all as specified and as directed. Note : Weather proof paint should be applied by roller brush only.

M&L for Complete removal of existing treatment including preparation of surfaces incl filling all cracks with approved crack filler of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer including one coat of 3 mm thick wall care putty complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer including one coat of 3 mm thick wall care putty complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl steel window, ventilators etc complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and as directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and as directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type skeleton shutter of size 35mm thick divided into squares with plain, chamfered or rounded, mitred and rebated sash bars prepared to receive glass, gauge sizes of members of shutters and comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. (Note: stainless steel wire mesh, butt hinges and necessary S.S screws shall be paid separately)

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces exceeding 10 CM girth or width complete all as specified and directed.

S&F PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S & F powder coated anodised aluminium frame,three track sliding for windows, fixed/top hung frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F powder coated anodised aluminium sliding window shutter and top hung ventilator shutters with sash bars aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing ,locking arrengement complete all as specified and directed. (note: Glass panes and wire mesh shall be measured and paid seperatly )

S&F in repair 18 mm thick plywood BWR type fixed with screws with timber framework complete all as specified and directed.

Material and labour for 1 mm thick colour / white laminated sheet fixed to wooden surface with glue complete all as specified and directed .

S & F tinted glass ordinary quality 5.5 mm thick and glazing with oil putty/glazing clips/beadings if required of any description complete all as specified and as directed.

S&F 100 mm long stainless steel butt hinges complete all as specified and as directed.

S&F 150mm size stainless steel handles, fabricated type complete all as specified and as directed.

S&F 150mm long stainless steel barrel tower bolt of extruded section complete all as specified and as directed.

M&L for stainless steel sliding door bolt with hasp staple (bolt type) length 300mm fixed complete all as specified and as directed.

S&F floor door stopper of stainless steel body & tongue, with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.0 mm and fixed with stainless steel wire staples complete all as specified and directed .

S&F continuous (piano) hinges 30 mm width of flap, brass, bright finish or electrogalvanised complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and directed.

S&F in repair 20mm dia Stainless steel Decorative type draphery curtain rods with brackets and side globes of approved quality for each length of rod complete all as specified and as directed .

Supply and fix Stainless steel Telescopic type ball bearing drawer channel of any size complete all as specified and as directed.

Supply and fix 100 mm long stainless steel decorative handle fixed with screws complete all as specified and as directed.

Supply and fix 200 mm long stainless steel hinge for cabinets auto close , concealed type complete all as specified and as directed.

S&F for brass mortoice lock with 4 lever vertical type size 100mm complete all as specified and as directed.

Supply and fix in repair bathroom mirror cabinet PVC of size 400 X 500 mm fancy type complete all as specified and as directed .Make : Cat No-554 of Prayag or supreme / prince

S&F in repair CP Soap dish fixed with chromium plated brass screw complete all as specified and directed.

S&F in repairs toilet paper holder, vitreous china, box type coloured, fixed with chromium plated brass screw complete all as specified and as directed.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to e.290.Gde-E-165 complete all as specified and directed .

M&L for applying two coats of synthetic enamel paint over a coat of red oxide , zinc chrome primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and as directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity complete all as specified and as directed.

Supply & fixing in repair vitreous china wash basin oval type , white size 550x400mm embedded in grainite top and including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT , PVC waste pipe complete all as specified and directed.

S&F 600mm x 450mm seamless bevelled edge mirror mounted on stainless steel studs and fixed with ss screws on wall complete all as specified and s directed.

S & F in repair 15mm bore dia. pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make : Cat No:CON-021KN of Jaquar or Hinware/kohler/Grohe

S&F in repair angle valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) complete all as specified and as directed. Make : Cat No:CON-059KN of Jaquar or Hinware/kohler/grohe

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified and as directed .Make : Cat No:ALD-579 of Jaquar or Hinware/kohler/Grohe

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and as directed. (Make : Prayag Cart Part No PIS-12 H) or Jaguar/Hindware/Grohe

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated. complete all as specified and as directed.

S&F in repairs CP towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed. (Make : Jaquar cat No ACN-CHR-1121S or Hinware/kohler/Grohe)

S&F in repairs stainless steel grating of 125 mm dia chromium plate grating for nahani traps with or without hole for waste pipe complete all as specified and as directed.

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and as directed.

S& F for 20mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc including taking down of old tubing of any description complete all as specified and as directed.

S& F for 25mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc including taking down of old tubing of any description complete all as specified and as directed.

Cutting Chases , pinning in , making good to facing where required and pointing in CM 1:3 to ends or edges of landings , steps , cills , sunshades , shelves , lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good of cutting in brick wall n.exc 10 cm girth complete all as specified and as directed.

S&L in repairs CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified and directed.

Demolition and beaking up drain AC pipes/PVC pipes/CI Pipes set in cement mortar of any dia and size complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor bore of the pipe 110 mm complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 110 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor bore of the pipe 75 mm complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 75 mm complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction single ( single 'T') equal or unequal complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed .

Dismantling water tanks of exc 500 but n.exc1000 ltr capacity and removing to store complete all as specified and directed.

S&F of rotational moulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for slab,shelves etc complete all as specified and directed

M & L for of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and as directed.

M&L for RCC type B1 1:2:4 (using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed.

S&F in repairs sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Supply and fix in repair CP Quarter Turn Sink Cock with regular swinging spout ( wall mounted model ) with wall flange complete all as specified and as directed. Make : Cat No-FLR-5347N of Jaquar or Hinware/kohler/Grohe .

Dismantling of wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets complete all as specified and as directed.

Providing and fixing tiled false ceiling of size(600x600)mm in true horizontal level suspended on interlocking T-24 Grid of hot dipped galvanized corrosion free becase of the zinc coating 120GSM sections. It consists of main"T" runner of size 24x32x0.3x3000mm, cross"T" of size 24x32x0.3x1200mm, secondary cross"T" of size 24x32x0.3x600mm and PPGI wall angle of size 24x24x0.4x3000mm. The GI powder coated wall angle24x24x0.4x3000mm fixed along the perimeter of the ceiling to Walls, partitions or columns etc.,with wooden screws at 300mm centers placed at 600mmc/c. is fixed with Rawl Plug 08x45mm creating 1200mmx1200mm grid. Main-T runners 24x32x0.3x3000mm are then suspended at 1200mmc/c from ceiling using 2mm GIwire. The cross T sections of 24x32x0.3x1200 mm is interlocked between the main T at 600mm center to centert of or magrid of 1200x600mm and then secondary cross "T"24x32x0.3x600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally the PVC tiles of size 595x595x8mm having PVC lamination infront side & Aluminum foil back on rareside need to be layed on the above grid frame. The PVC tile has humidity resistance RH 90%, Break strength of>160N, Fire resitance of Class AG3, 8624-1997 and NRC-0.15. Note : Colour of false ceiling shall be complete all as specified and as directed. (Make Diamond or Armstong /Aerolite celing system / saint Gobain gyproc)

S&F PVC wall panelling including GI Frame work comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall ueing nylon sleeves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm fixed to wall at approx 900mm centre to centre with gleat and steel expansion fasteners with and including wall section of 0.55mm thickness having kurled web of 50mm and flange of 28mm each with PVC sheet of 1.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre fixed with joining for 'J' trim & 'T' Section complete all as specified and as directed.

M&L for Wooden flooring of grade AC4 made of 8mm thick High density fibre board of size 1380mm length x 193mm width of floating floor concept (interlocking type) over a layer of 3mm thk polyurethene foam over PE (Polyeteylene) film over a levelled sub base complete all as per manufacturers instructions complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in subbase of floor complete all as specified and as directed.

M&L for Heavy duty Vitrified tiles of size 300x300x8 to10mm thick or high dimension (except thickness) of any colour any design durastone weather proof impacr resistant abrasion resistant exterior tiles as in floors etc set and jointed in neat cement slurry over and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Taking down existing unserviceable point wiring of any type/ size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators etc and removal of unserviceable material out of site area complete all as specified and as directed.

Taking down existing unserviceable light fittings, security light fittings, bulk head fittings, fall ceiling light fittings etc. from any height of building complete all as specified and as directed..

Taking down existing unserviceable MCB's/MCCB's/Distribution boards any capacity complete all as specified and as directed.

Taking down existing unserviceable Sub Main wiring of any description complete all as specified and as directed

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal modular box of suitable sizes with 1.3mm thicknes for housing the modular switches, sockets, fan regulators etc complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. for one light point controlled by one switch complete all as specified and as directed. Note :- (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor. (3) Three runs wire & one run of PVC conduit, Sunken box, modualr frames & connected accessories shall be measured as one point.

All as per Sl item No 112 above but for One ceiling fan/exhaust fan point controlled by one switch through regulator complete all as specified and as directed.

All as per Sl item No 112 above, but for One 5 Amps socket outlet point on the independent board complete all as specified and as directed.

All as per Sl item No 112 above, but for One 5 Amps socket outlet point on the same board complete all as specified and as directed.

All as per Sl item No.112 here in before, but for wire 2.5 Sqmm for Power point complete all as specified and as directed.

Supply and fix Modular switch 1 way 6A , 1-module complete all as specified and as directed.

Supply and fix Modular switch 1 way 16A with indicator, 1-module complete all as specified and as directed.

Supply and fix Modular socket, shuttered type, 6A - 3 pin 2 -module complete all as specified and as directed

Supply and fix Modular socket, shuttered type, 6/16A - combined 2-module complete all as specified and as directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed.

S & F lamp holder suitable for B-22 base lamps insulated body surface bakelite with back plate including LED Bulb 15 Watts complete all as specified and as directed

S & F 20 W surface / wall mounted LED batten light fitting aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and as directed. Make: Crompton CCS-100-20-65-HSL2-DP-NWH/ PHILIPS BN308CLED20S-6500L120PSUWH / WIPRO LL31-251-XXX-65AL5/Havells ENDURALINEARPROBS20WLED865PCSSIND/Bajaj-BCLAB20WCWLEDXT

S & F 10 W surface / wall mounted 2 feet LED batten light fitting input voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and as directed. Make:Crompton CCS-103-10-65-SL-DP-NWH/ Havells LHEXAZP7PN1W010 / PHILIPS BN021LED12S 6500K PSU GR / WIPROLL20-111-XXX-65NE3 /Bajaj-BCLAB10WLEDCWLED

S & F recess mounting LED down light fitting 2' x 2' of capacity 36 Watts powder coated white CRCA full glow,efficacy 120 lumen/watts rated life 50000 burning hours suitable for false ceiling pop/grid ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed by E-In-Charge . Make:Crompton: LCTLRP-36-FO-CDL / HAVELLS VENUSEXL2X2 PLR36WLED865SWH / WIPRO-CRCO10R036HE57G4 / Bajaj-BZRSQL43LXEWHODSD

S & F in replacement LED wall mounted Spot light fitting of range 10-20 Watts, CCT- 4000K (warm white) of 450mm long mounted of circular base with flexible/adjustible focus angle complete with driver including connecting up with flexible copper conductor complete all as specified and directed. Make :- Surya Cat No. SZSTCMX020, Luker Cat No. LSPT24SN, FurtunaAart Cat No. TSR 2018

S & F In replacement of old unserviceable Building security light fitting versatile pressure die-cast aluminium with high power LED 45 W as light source complete with LED 55 W 5000K including brackets made out of GI pipe 25 mm dia light grade pipe bent to shape incl 02 Nos MS flate clamps incl nut bolts connection complete all as specified and as directed. Make :- Crompton - TRP-409-45-57-SL-GL-NSG / Havells - ENDURASUNDOWNSL45WLED 765PASYBOPC / Wipro - LR22-501-XXX-57-XX / Bajaj-VISTAP45LWHPOPCSD Make:Crompton TRP-409-45-57-SL-GL-NSG / PHILIPS BRP030LED35CWSLRGRPSUV1 / HAVELLS ENDURASUNDOWNSL45WLED765PASYBOPC /WIPRO LR22-501-XXX-57-XX/Bajaj-VISTAP45LWHPOPCSDe : Bajaj cat part No. ENXT P 24L WH CR PC SD, Crompto Cat No-LSTS-25-CDL-M, Havells Cat No-ENDURASUNDOWNSL25WLED 765PASYBOPCIHD.

S & F Vertical loadline type TPN DB 4 way double door with prov of MCCB as incoming 4P, made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 160 A complete all as specified and as directed . Note :- MCCB shall be measured and paid separatly.

S&F MCCBs 415V, 16KA, 100 amps 4 Pole suitable for DB including removing the existing unserviceable one complete all as specified and as directed.

S & F in replacement sheet metal enclosure MCB DB SPN 8 way, 240 volts double door with locking system complete all as specified and as directed .

S & F MCB SP 6 to 32 Amps 240 volts C- type complete all as specified and as directed

S & F MCB SPN 40 to 63 Amps 240 volts C- type complete all as specified and as directed

M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated FRLSH multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 6 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed.

All as per Item Sl No-133 above but using 3 runs of single core 4 sqmm. (AC Points) complete all as specified and as directed.

All as per Item Sl No-133 above but using 3 runs of single core 2.5 sqmm. (for Bldg Security Lights) complete all as specified and as directed.

Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded crushed stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on complete all as specified and as directed. (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate).

Supply and fixing ceiling fans complete with blades,copper winding, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery not less than 210 CFM with service value more than equal to (≥) 6.00, BEE Five star rated with brushless direct current motor (BLDC) white colour complete all as specified and directed. Make:Gold Medal cat part no.SCFS 500748/Bajaj Cat part No:ENERGOS 28/ Crompton Cat part No:ENERGION RIVIRA/Havells Cat part No:PRO 28BLDC/Luker Cat part No:ECO28NEOBLDC Regulator 222cmm

Supply and fix wall mounted fan, metal body AC single Phase 230V of size 450 mm sweep, Airdelivery capacity not less than100 CMM speed notless than 1200RPM with, copper winding,Aerodynamic designed metallic wing blades/grills with marking of MES number on ceiling fan by stamping with ink print of lettering frame size Length 20cm width 2.5 cm at least two sides on fan complete including complete all as specified and directed. Make: Havells cat part No:V3 Wall/Bajaj cat part no:250527-Supreme Plus AC 450 MM Wall/Crompton cat part No:SSTORM2

Supply and fix exhaust fan, metal body AC single Phase 230V of size 300 mm sweep,RPM 1200 with, copper winding,blades,rag-bolts, and frame and louvers complete including making suitable size hole in wall for fixing of fan complete all as specified and directed Make: Havells Cat part No:Ventil air DSB /Gold Medal EFS851012 HAVAC PLUS /Crompton drift air plus300mm/Bajaj-Supreme plus/Luker cat part No:TuuliLME12

M&L for cutting of wall in required shape using machine core cutting only and making opening,at any height, fixing of suitable premoulded block of required suitable for mounting of exhaust fan including wire mesh and making good the disturbed surfaces,plastering,matching with existing colour along with hole size matching with existing colour and clearing all debris and making the work area clean complete all as specified and as directed. .Note:The quoted rate includes for all/any number of openings required at any place for proper ventilation of the site.