REPAIR AND MAINTENANCE OF GLASS PANES, WIRE MESH, DOOR, WINDOW INCL JOINERY FITTINGS AND BATHROOM SANITARY FITTINGS, PLUMBING WORK AND MISC REPAIR AT NAYA RAIPUR MIL STN UNDER AGE (I) NAYA RAIPUR

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Refixing of shutter in the same of opening after minor repair as directed by Engr -in-Charge

S&F aluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer (g) Making good of wall surface to match with existing surface complete all as specified and directed.

S&F aluminium anodised sliding windows ,shutter glazing with and including 4.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips , frame, with duco pattern grill of size 75 mm X 75 mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slides . Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F aluminium anodised windows, ventilators frame with side hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading ,clips, frame made with aluminium section as appended below :- (i) Frame :65X40X1.98 mm thick (ii) Top/bottom rail and style /rail of shutter : 44X47X1.98 mm thick (iii) Aluminium beading - 0.7 mm thick (iv) Aluminium fitting such as peg stay,aluminium hinges,aluminium handle 100 mm long,aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hang shutter including hinges steel peg stay complete all as specified and directed.

M&L framed work such as grills grating etc with end of bars shoulders and/or riveted .welded or forged into spikes.framed guard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and similar work conforming to Fe-410 complete all as specified and directed.

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified for directed.

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel , sheeting or other covering , running rails and guides) and hanging also fastening and fixing complete

S&F 0.63 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks , water troughs, ducts,urinal trough and funnels etc , cut to size,edge beaded if directed, holes punched , including round headed screws, bolts nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded /riveted seams including bending, turning up, mitred angles, stopped ends, outlets etc as required all as specified and directed.

S&F of 30 mm of second class hard wood Glazed and and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 250 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 12mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 200 mm long mild Barrel tower bolt, oval type stove enamelled black with bright bolt and fixed complete all as specified and directed.

M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and directed.

Supply and fix in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Hacking out old broken glass of (any thickness,size,quality or description) from old wooden frame ,or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing all as specified and directed.

S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F, 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , type C-21 complete all specified and directed.

S&F, 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 300 mm x 200 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.

M & L Glazed ceramic coloured tiles in vertical surface 350 mm x 250 mm x 7 mm/450 x 350x 7mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and jointed with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etc including 15 mm thick screed bed in CM mortar 1:6 set and joited with neat cement slurry and pointed in coloured cement incl to match coloured tiles complete all as specified and as directed.

M&L providing non- skid glazed joint free ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in dado/skirting etc including 10 mm thick screed bed in CM mortar 1:4 set and jointed with neat cement slurry and pointed in coloured cement incl to match coloured tiles complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick screed bed in CM 1:4 complete complete all as specified and as directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe incl provision of lime concrete complete all as specified and directed.

S & F in Repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed.

All as above item No 42 here in before but 20 mm dia all as specified and directed.

S&F, GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing only GI tube 15mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and directed

S&F, GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and directed

S&F in repair Kitchen sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mmx420mm bowl size 410mm x330mm x160mm complete all as specified and directed.

S&F in repair kitchen sink coupling of any size and any pattern including waste pipe complete all as specified and directed.

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).complete all as specified and directed.

S&F (in repairs) Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F (in repairs)two way angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F in repair for CP Health Faucet with 1 meter Flexible tube & Hook complete all as specified and directed.

S&F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified and directed.

Dismantling of existing water tanks capacity n exc 500 ltr and removing to store complete all as specified and directed.

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specific SSR Part- I complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specific SSR Part- I complete all as specified and directed.

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt. 210gms).complete all as specified and directed.

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed.

S&F 20 mm dia gun metal ,globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified and directed.

S&F 15mm bore pillar tap cast copper alloy with capstan head Chromium plated screwed down with or without letter Hot or Cold with long shank and fly nuts screwed for iron pipe and fixed as specified and directed.

S&F in repair only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.complete all as specified and directed.

S&F PVC connection 15mm bore length not less than 600 mm long with both ends PTMT nuts complete all as specified and directed.

S&F in repair CP towel rail(tubular type) 20mm dia, 600 mm long between flanges all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab flooring 20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners rubbing and polishing complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including 10mm thick rendering in CM 1:4 including rubbing and polishing .complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed.

M&L brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 complete all as specified and as directed by EIC.

S&F in repair fancy type curtain rails Harrison rails,mild steel , chromium plated with fixing bracket,stops,rollers etc for hanging curtain rod complete all as specified and directed.

S&F in repair 600mmx450mm beveled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed.

S&F in repair Aluminium Mortise lock 4 lever , size 75mm complete as all specified and directed

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 3, universal type, suitable foor door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed

Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 28944.00

FIRST SOLAR

M/S INDIA ENTERPRISES

ASHOKA ASSOCIATES