REPAIR TO WALL PLASTER, FLOORING, CHAJJA, AND PARAPETS FALSE CEILING AT CHHEOKI.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding ( bur not backing) , and removing rubbish off the premises complete all as specified & directed.

Demolition of cement concrete in roofs, floors, beams, staircase, landing,chhajjas,and similar suspended works complete all as specified & directed.

Demolition of brick wok built in cement mortar including all quoins,arches,pillars,etc, but excluding ashlar facing, dressed stone work, precast concrete article complete all as specified & directed.

M&L for brick work with sub class B; bricks, straight or curve on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No. 4 here-in before but except bricks complete all as specified and directed. Note:- Old brick obtained from demolition shall be used.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for glazed ceramic cloured tiles in vertical surface 350x250x7mm / 450mm x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc. complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding in CM 1:6 complete all as specified and directed

M&L for non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding in CM 1:6 complete all as specified and directed

M&L for glazed ceramic cloured wall tiles300 mmx200 mm x6 to 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in cement mortar 1:4 finished rough to receive wall tiles etc.

M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for factory made coloured chequered cement concrete tiles 300cm x 300cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving etc n.exc 15cm thick above or below ground level incl removing the rubbish from the work site complete all as specified

M& L for 100 mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in floor complete all as specified and directed.

S&F in repair for bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repair bib tap 15mm dia, fancy type chromium plated with long shank & cup (concealed type) screwed end for iron pipes or for union and fixed all as specified and directed.

S&F in repair 15mm dia bib tap standard of PTMT fancy type any colour, high pressure screwed for iron pipe with minimum weight 105 gms complete all as specified and directed

S&F in repair stop valve angular type 15mm dia, fancy type chromium plated with long shank & cup (concealed type) screwed end for iron pipes or for union and fixed all as specified and directed.

S&F in repair two way angle valve with wall flange 15mm bore fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair two way bib tap with wall flange 15mm bore, fancy type, quarter turn, brass chromium plated, long body with capstan head and cup screwed down for iron pipe or for brass ferrule including accessories complete all as specified and directed.

S&F in repair stop valve copper alloy down, high pressure with crutch or butterfly handles screwed down both ends for iron pipe or for unions for 15mm dia of pipe complete all as specified and directed.

S&F in repair stop valve 15mm dia cast copper alloy, CP fancy type with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipe or for unions, and fixed in pipe complete all as specified and directed

S&F in repair for rubber door seal 32mm wide and 5mm thick with aluminium strip of size 19mm wide and 2mm thick fixed with machine steel screw with washer, complete all as specified and directed

Removing air lock from GI pipe of any size by opening of joints/ fittings and refixing the same after the job is completed all as specified ans directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15 mm dia bore(min weight 142gms) complete all as specified and directed

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod& high density plastic ball screwed for iron pipe of 20 mm dia bore(min weight 210 gms) complete all as specified and directed

S&F of center hole basin mixer 15 mm dia bore chromium plated brass with casted swinging spout including plugging and securing to wall, fixed in repair complete all as specified and directed

S&F of 15 mm bore CP wall mixer with telephonic shower with tube and hook, fixed in repairs complete all as specified and directed

S&F for chromium plated brass shower rose 75mm dia with swivel joints fixed in repairs complete all as specified and directed.

S&F in repair for hand shower 120 mm dia (multi function with cascade effect) as per sample approved kept in GE office complete all as specified and directed.

S&F of pillar tap, cast copper alloy with capstan heads, fancy type, chromium plated screwed down high pressure, with or with out lettered 'Hot" or 'Cold' with long screwed shank and fly nuts ,screwed for iron pipe 15 mm bore fixed in repairs complete all as specified and directed

Repairs to leaking water in pillar taps, stop cock, angle valves, bib taps of any description by replacing the washer complete all as specified and directed.

S & F of spindles for 15 mm brass or CP brass stop cocks, bib taps etc. Fixed in repair complete all as specified and directed

Cutting chases, pinning in making good to facing where required for concealed water tubing and making good cutting not exc. 10 cm girth in brick walls complete all as specified and directed

Taking up or down steel tubing and connection 15 mm bore complete all as specified and directed

Taking up or down steel tubing and connection 20 mm bore complete all as specified and directed

S&F of steel water tubing, medium grade, ISI marked galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed

S&F of steel water tubing, medium grade, ISI marked galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F of ball valve of PVC for PVC low level flushing cistern fixed in repairs complete all as specified and directed

S&F of PVC handle for low level flushing cistern, fixed in repairs complete all as specified and directed

Repair/ adjustment to washers/ syphon etc. for high or low level flushing cistern any type and any make including replacement of washers, check nuts, plug etc. and making it functional complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 liters capacity, white with all fittings and fixtures including brackets and 32 mm dia bore PVC flush pipe complete all as specified and directed.

Repairs to leakage of small fittings ,galvanised iron medium grade such as sockets, elbow, nipple for 15/ 20 mm dia bore of pipe complete all as specified and directed

S&F of PVC flush pipe 32 mm dia for low level flushing cistern, fixed in repairs complete all as specified and directed.

S&F of plastic water closet seat black/ white closed pattern with flat bottom and cover and mild steel chromium plated hinging devices fixed in repairs complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' trap or 'S"' trap complete all as specified and directed

S&F in repair vitreous china squatting pan Orissa pattern size 580x440 mm white with integral for rest fixed in repairs including provision of lime concrete bedding complete and making good to floors all as specified and directed

S&F of flushing jet for pedestal pan pattern WC including flexible pipe and brass chromium plated nuts, fixed in repairs complete all as specified and directed.

S&F of PVC connection 15 mm dia and 45 mm long with 2 Nos PTMT nuts, fixed in repairs complete all as specified and directed.

S&F of grating doom 125 mm dia with waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed in repairs complete all as specified and directed. (min weight 40 gms)

S&F of PVC waste pipe 32 mm dia 60 cm long for WHB with cup, fixed in repairs complete all as specified and directed.

S&F of PVCwaste pipe 40 mm dia 60 cm long for WHB with cup, fixed in repairs complete all as specified and directed.

S & F in repairs 75 mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F of sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repairs complete all as specified and directed.

S&F of vitreous china wash basin, white flat back type of size 550x400 mm including brackets, cutting for and pinning in ends of brsckets in CM 1:3 including 32 mm dia chromium plated waste coupling 32 mm dia 450 mm long waste pipe complete all as specified and directed.

S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples, fixed in repairs complete all as specified and directed.

S&F of floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel fixed in floor with over all length of cover plate 140mm fixed in repair complete all as specified and directed.

Hacking out old broken glass ( any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/ metal pins complete all as specified and directed

S& F of sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

All as per Srl item No 63 but except sheet glass complete all as specified and directed. Note:- Sheet glass obtained from Srl item No. 62 shall be used.

S& F of figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

M&L for securing glass of any description in existing wooden frame/ metal frame glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebate,grooves,reputtying and painting/oiling puttied surface to match existing work

S&F of Tubular towel rail brass chromium plated ,20mm dia 'D' type ,60cm long between flanges, fixed in repair complete all as specified and directed

S&F in repair 300 mm ordinary rat tail rod pattern springs of brass including roller and roller plate fixed complete all as specified and directed.

S&F of steel window handles left/right and peg stay including welding to base plate, pin and handle/brackets fixed in repair complete all as specified and directed

S&F of 25 mm dia MS PVC coated Drapery rod with bright polish of superior quality incl accessories etc fixed in repair complete all as specified and directed

S&F of 25 mm dia brass fancy type single bracket fixed with PNC gutty and screws, fixed in repair complete all as specified and directed

S&F of galvanised iron medium grade reducer socket 20x15 mm, fixed in repair complete all as specified and directed

S&F of stainless steel plate rack (utensil rack) of size (600mmx750mm ) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings nut/ bolts fixed in repairs complete all as specified and directed

S&F in repair for 18 mm thick prelaminated MDF board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work as in cup boards etc. complete all as specified and directed

Fixing only in repairs loose existing pelmet boxes by embedding wooden guties in cement mortar 1:3 with MS clips and screws etc.(length of pelmet boxes n. exc. 1.5m ) complete all as specified and directed.

S&F of PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall 110 mm bore fixed in repair complete all as specified and directed

S&F of PVC (SWR) bends any radius , 110 mm bore fixed in repair complete all as specified and directed.

S&F in repairs rotational moulded, multilayer HDPE water storage tank of 500 ltrs capacity( cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos ,20 mm dia full threaded GI tank niple,20mm dia brass ball valve with epoxy coated aluminium rod with high density plastic float ball (minimum weight 210 gms) including fixing of inlet, outlet and over flow pipe etc complete all as specified and directed

S&F in repairs rotational moulded, multilayer HDPE water storage tank of 1000 ltrs capacity( cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos ,20 mm dia full threaded GI tank niple,20mm dia brass ball valve with epoxy coated aluminium rod with high density plastic float ball ( of minimum weight 210 gms) including fixing of inlet, outlet and over flow pipe etc. complete all as specified and directed.

S&F in repair CP toilet paper holder brass chromium plated as per sample kept in GE office complete all as specified and directed

S&F in repair CP soap dish as per sample kept in GE office complete all as specified and directed

S&F of stainless steel sink 1.0mm thick with drainage board for kitchen with plug waste pipe washers including cantilever cast iron bracket connecting union over all size 915mm x460 mm with bowl size 410mmx 330mmx160mm fixed in repair complete all as specified and directed.

S&F of health faucet including PVC pipe with brass nuts for EWC fixed in repairs complete all as specified and directed

S&F in repair door closer hydraulically regulated made up of aluminium extruded section body universal type, suitable for door shutters of 851 to 1000 mm in width complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box ,main body with stainless steel cover, governing pivot made of brass other part made of mild steel heavy duty fixed to aluminium doors complete all as specified and directed.

S&F in repair steel lock fixed brass 2-lever of size 100 mm to aluminium doors complete all as specified and directed.

M&L for refixing aluminium shutters of any description exceeding 1 sqm and not exc. 2.5 sqm each in the same opening after taking down ,easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed

S&F in repair chromium plated towel ring fixed with screw to wall complete all as specified and directed

S&F of ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed

S&F in repair PVC cabinet mirror coloured of size 300x450mm fixed with screw and PVC gutty on wall complete all as specified and directed

S&F of MS bends strips, support, or stays for rain water pipe, ventilating pipes including bolts, if required hook(stay),heavy for large gates hook and pintle hinges, large hasp and st hold fasts or similar articles conforming to Gde-290 E 165 complete all as specified and directed.

Welding at site in in repair at any position and any description exc. 2.5 cm but n.exc. 5 cm in length and thickness of metal to be welded not exceeding 6mm thick complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, beam haunching,girders, bressummers, lintels, cantilevers, shelves, including support, overhangs etc complete all as specified and directed.

Form work to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20 cm wide all as specified and directed

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F 4mm thick E-boards tiles (Make: Everest) false ceiling with powder coated GI snap grid frame work (Make: Armstrong/Saint Gobain or equivalent as approved) including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texture and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site including top beading on PVC frame as per specifications complete all as specified and directed.

S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

S&F of framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way, railings ,framework of water tanks and similar works conforming to Fe-290 gde E-165 complete all as specified and directed.

S&F of mils steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mils steel wire(annealed) not less than 0.90mm dia oe securing with clips all as specified.

All as per Srl item No. 100 above but 6 to 8mm dia.

Dismantling structural steel work including doors, gates etc complete all as specified and directed.

S&F of framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc complete, drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with hinges or steel hanging door fittings or other covering running rails and guide and hanging and fastening and fixing complete all as specified and directed.

S&F in repair of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

M&L for cement concrete type B-1 (20 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, aprx stones, bed plate, kerbs nd likes slightly rounded or chamfered complete all as specified and directed.

M&L for cement concrete type B-2 1:2:4 ( 40mm graded aggregate) as sin surface channels and drains all as specified and directed

M&L for providing cement concrete type B1 using 20mm graded aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete al as specified and directed.

M&L for providing precast cement concrete type B0 1:2:4 using 12.5 mm graded aggregate) set in cement mortar 1:4 louvers and jalies, 40mm thick (measured solid) including all mouldings but excluding frame( precast frame shall be measured and paid separately complete all as specified and directed.

M&L for reinforced cement concrete type B1 using 20mm graded aggregate as in slabs supported on walls, beams, and columns in floors, roofs landings, balconies ,canopies , deck slabs and in shelves and the like complete all as specified and directed.

M&L for 18-20mm thick granite(of any type) work table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and applying one coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer by paint sprayers machine over & including a layer of 1 to 2 mm thick putty on existing surface etc as per manufacturer's instructions including tools, plants scaffolding & safety belts complete all as specified and directed

M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and applying two coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer by paint sprayers machine over & including a layer of 1 to 2 mm thick putty on existing surface etc as per manufacturer's instructions including tools, plants scaffolding & safety belts complete all as specified and directed

M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and applying one coat of oil emulsion distemper of approved make in required shade over a coat of primer by paint sprayers machine over & including a layer of 1 to 2 mm thick putty on existing surface etc as per manufacturer's instructions including tools, plants scaffolding & safety belts complete all as specified and directed

M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and applying two coat of oil emulsion distemper of approved make in required shade over a coat of primer by paint sprayers machine over & including a layer of 1 to 2 mm thick putty on existing surface etc as per manufacturer's instructions including tools, plants scaffolding & safety belts complete all as specified and directed.

M&L for removing, scrapping & cleaning the old wooden painted surface completely & applying one coat of synthetic enamel paint on old painted surface of wood over a coat of pink primer of approved brand and shade etc. by mechanically by paint sprayers machine, repairing of scratches, if any, with standard putty & enamel paint, sand papering complete all as specified and directed

M&L for removing, scrapping & cleaning the old wooden painted surface completely & applying two coat of synthetic enamel paint on old painted surface of wood over a coat of pink primer of approved brand and shade etc. by mechanically by paint sprayers machine, repairing of scratches, if any, with standard putty & enamel paint, sand papering complete all as specified and directed

M&L for removing, scrapping & cleaning the existing old painted plastered surface including cornices & scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetation's etc completely and applying two coat of white wash complete all as specified and directed

M&L for removing, scrapping & cleaning the existing old painted plastered surface including cornices & scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetation's etc completely and apply a layer of 1 mm thick wall care putty to make the surface even and smooth and applying two coat of colour wash complete all as specified and directed

M&L for preparation of old decorated surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and stopping of distempered surface and applying two coat of oil emulsion distemper of approved shade on surface of wall complete all as specified and directed

M&L for preparation of old surface of steel and iron materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots of any description , not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel paint, white or tinted mechanically by paint sprayers machine complete all as specified and directed

M&L for preparation of old surface of steel and iron materials by brooming down or steel wire brushing ,scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots of any description , not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted mechanically by paint sprayers machine complete all as specified and directed

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetation's by scrapping machine tool/electric hand grinder and making the surface even and smooth by applying wall care putty applying one coat of cement base paint white or tinted by Mechanical paint sprayers on old surface of wall complete all as specified and directed

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetation's by scrapping machine tool/electric hand grinder and applying two coat of cement base paint white or tinted on old surface of wall by Mechanical paint sprayers complete all as specified and directed

M&L for 5 mm thick rendering on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of chalk whitening complete all as specified and directed.

M&L for preparation of new plastered surfaces , and applying two coats of oil emulsion distemper over a coat chalk whiting of approved shade on old surface of wall complete all as specified and directed.

M&L for preparing of newly plastered ceiling surface and applying two coats of white wash complete all as specified and directed.

Supply and laying of reinforced concrete pipes, class NP2 of 200mm dia bore of pipe laid and jointed complete with collars complete all as specified and directed.

M&L for taking down carefully old damaged epoxy flooring, cleaning the surface making good for laying of 4 mm thick Epoxy flooring and concrete surface as per manufacture instruction to match with the existing surface complete all as specified and directed.

M/s VIJAY TRADERS

SUNIL ENTERPRISES

M/S VIVEK DUBEY

Comnet technologies

M/S JAI DURGA CONSTRUCTION