Combined Package for Work A- Estab 110kV S/s at Nagenahalli and constr. of 110kV line-1.314km, Work B- Estab. 110kV S/s at Hosapete City (Beside DC office-Amaravathi) and constr. of 110kV line 0.815km, Work C -Up gr. 110kV S/s at Dothihal village and constr. of 110kV line- 5.775km, Work D- Estab. 110kV S/s at Nelogipura(Bhairapura) and constr.110kV line-5.693km on Partial Turnkey Basis

Station Supply Portion

STATION SUPPLY PORTION:

POWER TRANSFORMERS:

a) 20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel...

b)Nitrogen Injection Fire Extinguishing system including Supply,Erection, Testing & Commissioning and civil engineering works as per the recommendation of the supplier of the fire Extinguishing system...

CIRCUIT BREAKER :

SF6 Gas circuit breaker with Semi-Pneumatic/Pneumatic operated/Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connector...

ii) For 110/33-11KV Transformer

B. 33kV, 800A, 25kA class

For 33kV side of 110/33kV transformer

ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators complete set.

2) Upright mounting type without earth switch LPH 6350mm

3) Upright mounting type without Earth switch LPH 4600mm

Terminal connectors for Isolators :

Rigid type suitable for Moose ACSR - 27 Nos

Flexible type suitable for 63mm Al.pipe - 15Nos...

B) 33 KV, 800A, 25KA Class Double Break Manually operated isolator With terminal connectors suitable for DRAKE ACSR.

i) Upright mounting type with Earth switch.(Live point height 4000mm)

C)11KV isolator

i) 11KV isolator Double break 400A, 25KA capcity with rigid bi-metalic terminal connectors suitable for coyote ACSR for capacitor bank.

ii) 11KV isolator Single break 400 A, 25 KA capcity with Roster switch with rigid bi-metalic terminal connector suitable for coyote ACSR.

CURRENT TRANSFORMER :

Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose/Drake ACSR conductor complete ...

ii)110 kV class, 40 KA, CT of ratio 400 -200/ 1-1-1A for Tr. Lines

For Metering : 10 VA, Accuracy class 0.2s

For Back up Protection : 30 VA, Accuracy class 5P20

For Differential Protection : PS cla...

iii)110 kV class, 40 KA, CT of ratio 400 -200/ 1-1-1A for Tr. Lines

Core 1: Knee point voltage Vk-800 V at 400A, Rct 5ohm at 400/1A,accuracy class PS-Dist/Diff

Core 2: 10 VA, Accuracy class 0.2s,Mete...

iv) 33 kV class, 25 KA, CT of ratio 400-200/ 1-1-1A for Tranfrs

Core - 1 : Vk-240 V, Rct 5 ohm at 400/1A, Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy class 0.2s- Metering

v) 33 kV Class, 31.5 kA, NCT of ratio 400-200/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 33 kV CT at 33 kV side of trfr) with terminal connector as per technical spe...

vi) 11 KV Class, 25KA, NCT of ratio 1200-800/1-1-1A for REFR protection( of similar rating and ratio as that of Incomer of 11KV Switchgear) with terminal connector suitable as per technical specificat...

VOLTAGE TRANSFORMERS : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK etc., complete as per Technial specification:...

SURGE ARRESTOR : (Procelain/Polymer) metal oxide, gapless type with rigid bimetallic terminal connectors suitable for Moose/Drake ACSR as per technical specifications..

i) 96kV, 10kA, Class- III, SM t...

ii) 96kV, 10kA, Class-III, SM type -For overhead Lines

iii) 30 kV, 10 KA, class - III, Metal oxide type-For Transformers

iv) 30 kV, 10 KA, class - II, Metal oxide type-For OH line

9 kV, 10 KA with connector and clamp

Control and Relay panel complete: Simplex type Control and Relay panel complete as per technical specifications

a) For Power Transformer 110/11 kV

b) For Power Transformer 110/33 kV

c) For 110KV Transmission lines

1.All the C&R panels and associated panels shall be of one and the same make for uniformity and interchangability of components

2. The accuracy class of meterin...

Total Weight of fabricated out of galvanised Station structures & Mounting Structures,Lighting Mast & Street Lighting Structure (excluding Bolts & Nuts) as per technical specifications

Total Weight of galvanised Bolts & Nuts of Station structures & Mounting Structures,Lighting Mast & Street Lighting Structure as per technical specifications

11kV ODS and take of structure

Supplying of Double pole structure with 9.5 Mts, RCC poles WL 300 Kgs for mounting 11kV,400 A Roaster Isolators and 9kV,10KA surge arrestor (3 No.) complete set.

BUS BAR FORMATION as per technical specifications:

Rigid bus with taps & clamps:

(i) Aluminium Tube conforming to 6340 WP of IS-5082/1969 (BS 1600-Sch.40) of following nominal diameter

b) 63 mm size for connecting isolator to vertical tap

ii) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 110KV side with rounded off end.

iii) Post insulator clamps suitable for 75mm Aluminium pipe & Post insulator solid core type - 110kV side

b) Expansion type

c) Sliding type

iv) Corona Bell Suitable for Aluminium Pipe of size 75mm on 110 kV

iv) End cap for 63mm

Post Insulators-Cylindrical Solid Core Insulators as per technical specification:

i. 110kV 1 Unit/Stack

ii. 33kV 1 Unit/Stack

DISC INSULATORS WITH HARDWARES as per technical specification :

90 KN Disc Insulators 3 units each suitable for Drake ACSR (18 Nos of Tension strings +6Nos suspension strings =24 strings)

ii. Bolted Type Single Tension Clamp and hardware suitable for Drake ACSR.(33 kV Side).

iii. Bolted Type Single Suspension Clamp suitable for Drake ACSR. (On LV Side of tfr).

INSULATOR HARDWARE & CLAMPS as per technical specification:

a) C type Wedge connectors Moose - Lynx (Line)

b) C Type wedge connector suitable for Drake -Drake (33 kV Side )

c) Post insulator clamp suitable for Moose ACSR and 110kV Solid core insulator

d) Post insulator clamp suitable for Moose ACSR and 33kV Solid core insulator

Auxilliary Transformer :

1.Supply of Station Auxiliary Transformer-copper winding with oil, outdoor type 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer (with 5 taps) with step vo...

2. LTAC Panel (indoor):

LTAC panel (Indoor) 415 V as per technical specification, comprising of Volt meter, Ammeter, 1 I/C MCCB 200A + 2 nos 3 phase, 63A OG SFU + 2 nos 3 phase, 32A OG SFU + 6 nos 3 ...

3. AC Distribution box (out door ):

AC Distribution box (outdoor) 415 V, Single front type with 6 terminals ,one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel complete as per...

4. Supplying of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivecto...

LT Power armoured UG Cable as per specification:

a) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules

b) 1.1 kV class 4X 25 Sq mm Copper Cable with glands/lugs/ferrules

c) 1.1 kV class 4X 10 Sq mm Copper Cable with glands/lugs/ferrules

Station Battery & Battery Charger:

A) Station Battery :

110 V, 200 AH Battery set (Plante/Grid/Nickel Cadmium Type) as per Technical Specifications.

B) Station Battery Charger :

Battery charger suitable for 1X110V, 200AH, Battery set (Plante/Grid/Nickel Cadmium Type) -15A float and 30A boost (with float and boost battery charger as per technical s...

C) LT DC Distribution panel ( Indoor) :

LT DC Distribution panel ( Indoor) comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG e...

1.1 KV class PVC insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications:

i) 19 Core 2.5 Sq.mm.

ii) 10C x 2.5 Sq.mm

iii) 4 Core 6.0 Sq.mm.

iv) 4 Core 2.5 Sq.mm.

v) 2 Core 6 Sq.mm.

vi) 2 Core 2.5 Sq.mm.

2. 11KV U.G. Cable with the required cable terminations at both ends.

a) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch Gear to Auxiliary Tr...

b)11KV XLPE cable, 1000Sq. mm.Aluminium cable from 110/11KV transformers to 11KV Switchgear.

c)11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.

3. Cable Termination kits suitable for following sizes as per Technical Specification.

A. Indoor type:

i) Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable

ii) Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable

iii) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable

B. Outdoor type:

i)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable

ii) Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable

iii) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable

Equipments for establishing SCADA Communication as per KPTCL Specification

i) Remote Terminal Unit (RTU)

ii) Data Concentrator Unit (DCU)

iii) 2kVA online UPS (230V AC 1phase 50Hz) with battery set

iv) Supply of Power cables for SCADA

a) Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core

b) Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core

c) Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core

v) Supply of Control Cables for SCADA

a) Supply of Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core

b) Supply of Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.

c) Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications

Note: Satellite communication required will be arranged by SLDC

Capacitor Bank :

Design, Engineering, Suppy, Erection (including civil works), Testing & commissioning of 2.9MVAR, 12.1KV capacitor Bank, Star connected, Double bank with internal fuses ternimal conn...

FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS

i) Mechanical Foam Type Extinguisher :

ii) Water type (gas pressure type) 9 Ltr. capacity

iii) Carbon Dioxide Type 4.5 Kgs capacity

a) G.I Buckets15 Ltr. capacity

b) Steel stands for above to have 4 buckets to each stand

Maintenance Tools and Plant.

1. Portable (Mobile) Oil Pump (1/2 HP Airpump 500 to 1000 gallons)

2. Telescopic ladder aluminium 6 mtr.height

3. Ring spanner set

4.Tube spanner set

5. Pipe wrench 24 inch

6. Pipe wrench 18 inch

7. Hydraulic crimping tools up to 1000 Sq.mm

8. Rubber hand gloves (15KV Tested)

9. Rechargeble 5W LED Hand Torch

10. Insulated cutting plier 12 inch size

11.Insulated cutting plier 8 inch size

12.Live line tester 500V AC/DC

13. Screw driver 18 inch

14. Screw driver 12 inch

15. Hammer 8 Ibs

16. Hammer 2 Ibs

17. Chain pully block 5 ton capacity

18. Hydraulic jack 5 ton capacity

19. Pipe derrick Suitable for 3Mt and lift of 6Mtrs Height

21.Box spanners

22.Transil oil dielectric break down test kit (with 2.5 mm gap 0-60 kV) Tester

23.Insulation Megger Digital Type 2.5 to 5KV

24.Insulation Megger 500V

25.SF6 Gas leak detector

26.Multimeter Electro Mechanical Type

27.Multimeter Electronic Type

29.DC voltmeter range -5V to +5V

30.Hydrometer syring suitable for vent holes

31.Specific gravity correction chart

32.Wall mounting type holder for hydro meter

33.Thermometer with wall mounting holder

34.Rubber appron

36.Protective goggles

37.Acid resisting jars (4 pint capacity)

38.Rubber shoes knee height

39.Glass funnel

40.Grounding sticks expandable upto 18 ft

Miscellaneous items:

1 a. Rubber mats 1000mm X 1000mm X 10mm size tested for 15KV class

1 a. Rubber mats 2000mm X 1000mm X 12mm size tested for 15KV class

2. First aid box

3. Shock treatment charts hard board laminated with colured pictures & Literatures both in kannada & English

4. Water filter/water purifier wall mounting type (Aqua guard type)

5. Sub-station name board duly painted

6. Fixograph of size 1.5m x 2.5m with Engilsh/Kannda alphabets

7. Brass cupboard lock 6 levers (best make of approved quality) 75 mm size

8. Danger board (probhited) with support structure including fixing in front of the gate

9. Equipments name plates & earthing name plates including fixing at outdoor yard.

Furniture for Control Room Staff and Maintenance Staff:

1. Steel Almirahs 6.5 Feet

2.Steel Almirahs 6.5 Feet with glass panel doors

3.Officers Tables

4.Steel Slotted Angle rack(big size)

5.Steel Slotted Angle rack(small size)

6.Steel dust bins

7.Executive revolving chairs

8. S' Type arm chairs

9.Steel folding chairs

Station Yard Lighting (Out Door)

(To be designed, assessed & quoted by the bidder)

Supply and installation/Fixing/Provision of Outdoortype Thermoplastic Modular Panel enclosure with transparent Polyca...

Station Yard Lighting (Out Door)

(To be designed, assessed & quoted by the bidder)

Supply and installation/Fixing/Provision of Outdoortype Thermoplastic Modular Panel enclosure with transparent Polyca...

PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification.

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...

Shifting of existing 33 kV Transmission lines

(33kV Kushtagi-Dothihal and 33kV HRG Solar)

1) 33kV, 3 Core XLPE UG Cable, 400 Sqmm

0.175 x 2 = 0.350 In two runs x 2 feeders = 0.700 Km

2) Heat shrinkable outdoor type cable termination kit 33kV, 3core XLPE UG Cable - 400 Sqmm

3)RCC Pole-9.5M Long, 350 kg WL for 33kV

4) DP Set for 33kV

5) 33KV Compact disc insulater

6) Bolted type tension clamp single Coyote ACSR conductor 70/90 kN

8) Barbed wire (10 mtrs)

9) Route joint indicating slabs

Line Supply portion

Line Supply Portion:

Total weight fabricated, galvanised Towers (High Tensile Steel) excluding Bolt & Nuts as per technical specifications

Note:Rate to be quoted on per tonne Basis

Total weight fabricated,galvanised Towers (Mild Steel) excluding Bolt & Nuts as per technical specifications

Note:Rate to be quoted on per tonne Basis

Total weight of galvanised Bolts and Nuts as per technical specifications

Note:Rate to be quoted on per tonne Basis

Tower Accessories:

a) Number Plates (1 No. per tower)

b) Danger Board (1 No. per tower)

c) Circuit Plates (1 No. per circuit)

d) Phase Plates (Set of 3 Nos.)

e) Earth Bonds 300mm long

f) Earth Bonds 450mm long

g) Supplying of Grounding of tower including cost of 40mm dia, 2.5mm thick, class 'C' GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal.

Conductors & Ground Wires as per technical specifications:

i) Lynx ACSR Conductor + 1.5% sag

ii) 7/3.15 mm GI Ground wire

Insulators strings suitable for LYNX ACSR CONDUCTOR as per technical specifications :

i.110kV,90kN,Single Tension insulator strings consisting of any one of the following:

a. Insulator string consis...

ii .110kV,90kN,Single Suspension insulator strings consisting of any one of the following:

a. Insulator string consisting of 1X7nos. of 90kN Disc insulators

b. Porcelain long rod insulator string e...

II. Insulators strings suitable for DRAKE ACSR CONDUCTOR as per technical specifications :

i. 220kV,120kN,Single Tension insulator strings consisting of any one of the following:

a. Insulator strin...

III. Insulator Hardwares for LYNX ACSR CONDUCTOR as per technical specifications:

i. Compression type Single Tension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for 1X8 ...

ii. Compression type DoubleTension clamp (excluding Disc Insulators) with hardwares & arcing horns suitable for 2X8 units of 90kN Disc insulators to suit LYNX ACSR conductor

iii. Compression type Single Suspension (excluding Disc Insulators) with hardwares & arcing horns suitable for 1X7units of 90kN Disc insulators to suit LYNX ACSR conductor

iv. Compression type Double Suspension (excluding Disc Insulators) with hardwares & arcing horns suitable for 2X7units of 90kN Disc insulators to suit LYNX ACSR conductor

IV. Insulator Hardwares for DRAKE ACSR CONDUCTOR as per technical specifications:

i. Compression type Single Tension clamp (excluding Insulators) with hardwares & arcing horns suitable for 1X16 unit...

iv.Compression type Double Tension clamp (excluding Insulators) with hardwares & arcing horns suitable for 2X16 units of 120kN insulators to suit DRAKE ACSR conductor

NOTE: All the Insulator strings...

Accessories for Conductors:

a) Mid Span Compression Joints

b) Pre formed armour rods

c) Repair sleeves

e) Vibration dampers

B. Accessories for Earthwire:

a) Mid Span Compression Joints

b) Repair sleeves

d) Single Tension clamps (bolted type)

e) Single Suspension clamps (bolted type)

Station Mandatory Spares

Station Mandatory Spares

Circuit Breaker (CB)

Closing coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Tripping coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Pad (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Connector (For one Complete Circuit Breaker)

a) for 145KV CB

SF6 Gas (40% of total gas Qty. for Sub-Station)

Copper Contract fingers male & female (For one Complete Isolator)

a) for 123KV Class

Terminal Connector (For one Complete Isolator)

a) for 123KV Class

Terminal Pad (For one Complete Isolator)

a) for 123KV Class

Station Erection including Testing and Commissioning

STATION ERECTION PORTION INCLUDING TESTING & COMMISSIONING :

POWER TRANSFORMERS:

a) 20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer with OLTC ONAN/ONAF...

CIRCUIT BREAKER :

SF6 Gas circuit breaker with Semi-Pneumatic/Pneumatic operated/Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connector...

ii) For 110/33-11KV Transformer

B. 33kV, 800A, 25kA class

For 33kV side of 110/33kV transformer

ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators complete set.

2) Upright mounting type without earth switch LPH 6350mm

3) Upright mounting type without Earth switch LPH 4600mm

Terminal connectors for Isolators :

Rigid type suitable for Moose ACSR - 27 Nos

Flexible type suitable for 63mm Al.pipe - 15Nos...

B) 33 KV, 800A, 25KA Class Double Break Manually operated isolator With terminal connectors suitable for DRAKE ACSR.

i) Upright mounting type with Earth switch.(Live point height 4000mm)

B)11KV isolator

i) 11KV isolator double break 400A, 25KA capacity with rigid bi-metalic terminal connectors suitable for coyote ACSR for capacitor bank - 4 Set

ii) 11KV isolator Single break 400 A, 25 KA capacity with Roster switch with rigid bi-metalic terminal connector suitable for coyote ACSR- 11Set

CURRENT TRANSFORMER :

Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose/Drake ACSR conductor complete ...

ii)110 kV class, 40 KA, CT of ratio 400 -200/ 1-1-1A for Tr. Lines

For Metering : 10 VA, Accuracy class 0.2s

For Back up Protection : 30 VA, Accuracy class 5P20

For Differential Protection : PS cla...

iii)110 kV class, 40 KA, CT of ratio 400 -200/ 1-1-1A for Tr. Lines

Core 1: Knee point voltage Vk-800 V at 400A, Rct 5ohm at 400/1A,accuracy class PS-Dist/Diff

Core 2: 10 VA, Accuracy class 0.2s,Mete...

iv) 33 kV class, 25 KA, CT of ratio 400-200/ 1-1-1A for Tranfrs

Core - 1 : Vk-240 V, Rct 5 ohm at 400/1A, Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy class 0.2s- Metering

v) 33 kV Class, 31.5 kA, NCT of ratio 400-200/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 33 kV CT at 33 kV side of trfr) with terminal connector as per technical spe...

iii) 11 KV Class, 25KA, NCT of ratio 1200-800/1-1-1A for REFR protection( of similar rating and ratio as that of Incomer of 11KV Switchgear) with terminal connector suitable for 2 Nos. of suitable Cop...

VOLTAGE TRANSFORMERS : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK etc., complete as per Technial specification:...

SURGE ARRESTOR : (Procelain/Polymer) metal oxide, gapless type with rigid bimetallic terminal connectors suitable for Moose/Drake ACSR as per technical specifications..

i) 96kV, 10kA, Class- III, SM t...

ii) 96kV, 10kA, Class-III, SM type -For overhead Lines

iii) 30 kV, 10 KA, class - III, Metal oxide type-For Transformers

iv) 30 kV, 10 KA, class - II, Metal oxide type-For OH line

v) 9kV, 10kA with connector and clamp

Control and Relay panel complete, Simplex type control and relay panels complete as per technical specifications

a) For Power Transformer- 110/11 kV

b) For Power Transformer 110/33 kV

c) For 110KV Transmission lines

1.All the C&R panels and associated panels shall be of one and the same make for uniformity and interchangability of components

2. The accuracy class of meterin...

d) Releasing & Re-ercetion of existing 33kV transmission line panels from 33/11kV S/s to 110/33/11kV S/s

Total Weight of Station structures and Mounting Structures,Lighting Mast & Street Lighting Structure including Bolts & nuts as per technical specifications

11kV ODS and take of structure

i) Erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set .

BUS BAR FORMATION as per technical specifications :

Note: The scope also includes installing insulator strings complete with necessary Hardwares and stringing of the conductor / Earth wire etc as p...

Rigid bus with taps & clamps:

(i)Aluminium Tube conforming to 6340 WP of IS-5082 / 1969 (BS 1600-Sch.40)

b) 63 mm size for connecting isolator to vertical tap

Post Insulators-Cylindrical Solid Core Insulators as per technical specification:

i) 110kV 1 Unit/Stack

ii) 33kV 1 Unit/Stack

Auxilliary Transformers :

1.Erection of Station Auxiliary Transformer-copper winding with oil, outdoor type 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer (with 5 taps) with step...

2. LTAC Panel (indoor):

LTAC panel (Indoor) 415 V as per technical specification, comprising of Volt meter, Ammeter, 1 I/C MCCB 200A + 2 nos 3 phase, 63A OG SFU + 2 nos 3 phase 32A OG SFU + 6 nos 3 p...

3. AC Distribution box (out door ):

AC Distribution box (outdoor) 415 V, Single front type with 6 terminals ,one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel complete as per...

4. Erection of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector...

LT Power armoured UG Cable as per specification:

a) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules

b) 1.1 kV class 4 X 25 Sq mm Copper Cable with glands/lugs/ferrules

c) 1.1 kV class 4 X 10 Sq mm Copper Cable with glands/lugs/ferrules

Station Battery & Battery Charger:

A) Station Battery :

110 V, 200 AH Battery set (Plante/Grid/Nickel Cadmium Type) as per Technical specifications.

B) Station Battery Charger :

Battery charger suitable for 1X110V, 200AH, Battery set (Plante/Grid/Nickel Cadmium Type) consisting of 55Nos-15A float and 30A boost (with float and boost battery charger...

C) LT DC Distribution panel ( Indoor) :

LT DC Distribution panel ( Indoor) comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG e...

1.1 KV class PVC insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications:

i) 19 Core 2.5 Sq.mm.

ii) 10C x 2.5 Sq.mm

iii) 4 Core 6.0 Sq.mm.

iv) 4 Core 2.5 Sq.mm.

v) 2 Core 6 Sq.mm.

vi) 2 Core 2.5 Sq.mm.

1. 11kV Switchgear as per Technical Specification:

11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+12F+1BC+4CB+1AP (Remote Announc...

2. 11kV Switchgear as per Technical Specification:

11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+12F+1BC+2CB+1AP (Remote Announc...

2. 11KV U.G. Cable with the required cable terminations at both ends.

a) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch Gear to Auxiliary Tr...

b)11KV XLPE cable, 1000Sq. mm.Aluminium cable from 110/11KV transformers to 11KV Switchgear.

c)11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.

3. Cable Termination kits suitable for following sizes as per Technical Specification.

A. Indoor type:

i) Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable

ii) Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable

B. Outdoor type:

iii)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable

iv) Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable

v) A.Indoor Type : Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable

vi) B Outdoor type: Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable

Equipments for establishing SCADA Communication as per KPTCL Specification

i) Remote Terminal Unit (RTU)

(Site survey, wiring, installation,testing and commissioning of RTU )

ii) Data Concentrator Unit (DCU)

(Site survey, wiring, installation,testing and commissioning of DCU (DCU installation to be

done in RTU panel)

iii) 2kVA online UPS (230V AC 1phase 50Hz) with battery set

(Wiring, Installation, Testing & Commissioning of UPS with batteries & cables)

iv) Integration of RTU,DCU, UPS with field equipment

v) Laying of Power cables and Control Cables for SCADA

a) Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core

b) Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core

c) Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core

vi) Laying of Control Cables for SCADA

a) Supply of Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core

b) Supply of Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.

c) Supply of Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications

Note: Satellite communication required will be arranged by SLDC

Laying of PVC Insulated Copper Control Cables for Station Yard Lighting :

1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification.

Earth Mat formation :

i. Supplying and laying MS.Flat 75 x 12 mm flat welding and applying ACB paint to welded portion as per drawing/standard if required (all other materials to be supplied by contr...

ii.Supplying and laying MS.Flat 75 x 8 mm flat welding and applying ACB paint to welded portion as per drawing/standard if required (all other materials to be supplied by contractor)

iii.Supplying and Erection of Grounding of Equipment with G.I.Flat75x12mm and connecting Equipment to the earth mat/ground pit including including all connected works with all materials supplied by th...

iv.Supplying and Erection of Grounding of equipments with 75 x 8 mm G I flat and and connecting equipment to the earthmat/ground pit.

v.Supplying and Providing 40mm dia M.S.Rod 1.075m long earthman spikes including heating, bending top 50mm overlap flattening and making spike edge at one end driving into the earth below the ground l...

vi.Supplying and Providing 32mm dia M.S.Rod 1.075m long earthman spikes including heating, bending top 50mm overlap flattening and making spike edge at one end driving into the earth below the ground ...

vii. Providing Cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded alround the pipe using cast iron welding electrodes as per drawing...

viii. Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits.

ix. 40 mm Dia Deep Bore Electrodes of 5 Mtr long with 10Mtr spacing between any two electrodes

Shifting of existing 33 kV Transmission lines

(33kV Kushtagi-Dothihal and 33kV HRG Solar)

1) 33kV, 3 Core XLPE UG Cable, 400 Sqmm

0.175 x 2 = 0.350 In two runs x 2 feeders = 0.700 Km

2) Heat shrinkable outdoor type cable termination kit 33kV, 3core XLPE UG Cable - 400 Sqmm

3)RCC Pole-9.5M Long, 350 kg WL for 33kV

4) DP Set for 33kV

6) Barbed wire (10 mtrs)

7) GI Grounding pipe B class

8) Releasing of Coyote conductor

7) Route joint indicating slabs

Line Erection Portion

LINE ERECTION PORTION :

Check Survey using their own equipment as per specification for 110kV line

(Conducting detailed check survey along the approved route duly following the route alignment, GPS C...

Conducting Drone survey of Transmission lines for collection of data along with Aerial inspection of EHV line corridor using LIDAR method for measurements of vertical, horizontal and ground clearances...

Stringing of ACSR conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications.

(Paving out conductor from anchor to anchor normally spaced at ...

ii.Ground wire for 110kV line

Assembling and Erection of 110kV Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials

1) The Bidders are required to quote the rates taking in to co...

Assembling and Erection of 220kV Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials

1) The Bidders are required to quote the rates taking in to co...

Tower Accessories:

a) Supplying and fixing GI angle iron 45X45x5 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mts length each at inner and outer surface of tower to ...

b) Supplying and fixing of Barbed wire as per the specification.

c) Grounding of tower including cost of 40mm dia, 2.5mm thick, class 'C' GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal including excavation charges.

I.Re-stringing and Releasing of existing Lynx/Drake Conductor & Ground wire

i. Re-stringing and Releasing of existing Lynx conductor

a) Work A : From existing 110kv munirabad to sankalpura line

ii. Re-stringing and Releasing of existing DRAKE conductor from from 220kv lingapura to BTPS

iii. Re-stringing and Releasing of existing ground wires for 110KV & 220KV LINES

Dismantling of existing 220kV & 110kV Towers :

Dismantling of existing type tower parts including loading and unloading from site to store:

a) Work A :220 KV Lingapur-BTPS(Siddaramanahalli) SC line...

b) Work B : 110 KV MRB - Donimallai DC line T. No. 11 DA+0

c) Work D: 110KV DC A+0 Tower

a) Payment will be made only for the actual weight of towers/conductor length/earth wire length whic...

Civil Sub Station Works

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical(power/...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...

Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanica...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour. 600mm long towel rail with ...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providng and fixing pillar cock with high neck with 265mm extended body made of stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Economy

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing factory made UPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance (plus or minus 1mm), with wall thickness 2.0 mm ((plus or minus 0.2 mm)...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:125x85x5.5mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per ...

SUBMERSIBLE CABLE:

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest ...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm

NON - RETURN VALVE :

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm

ix) Control Panel BOARD-A:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, A...

POWER CAPACITOR:

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...

GALVANISED MILD STEEL TUBES:

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one e...

Erection elctrification & Commissioning works of pumpsets:-

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm

Supplying PVC flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N...

Supplying And Fixing Metal Fan Box with Round Hook.

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runn...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 100 A

Supplying of on load change over switches 4 poles,AC-23A Duty,415V,50Hz,AC Supply. With all accessories. (SMEnclosure Sheet Metal Execution) 100 A

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying, fixing andwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole

Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase 4wire whole current class-1 Accuracy Energy Meter.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws. 80/90 mm.

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws.110 mm.

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)

Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...

Supplying wall mounting fan suitable to operate at single-phase 230v AC supply. 400 mm Sweep

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8...

Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...

Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wa...

Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required No...

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...

Extra length of GI pipe of class B 19mm dia for down rod.

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm copper plate

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm Copper strip

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of E...

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials to the appropriate disposal area stacking serviceable and unserviceable materi...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Civil Line Portion

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...