SPECIAL REPAIRS TO BLDG NO T 10 OF 220 TRANSIT CAMP AT RMS

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles including cement mortar bedding of any description and removing rubbish off the premises complete all as specified and as directed.

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles including cement mortar bedding of any description and removing rubbish off the premises complete all as specified and as directed.

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles including cement mortar bedding of any description and removing rubbish off the premises complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface including high lighter/strips of tile size 450X 350X 7 mm,/350 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including backing coat of 10 mm thick in CM (1:4) including dismantling of old tiles including cement mortar bedding of any description and removing rubbish off the premises complete all as specified and as directed.

S&F in repairs for 4 mm thick of size 600x600mm HPSC (high pressure Steam Cured) pre-painted self embossed, textured designer board E-Board Classic to be fixed with and including GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper complete all as specified and as directed.

S&F in repairs Pre-painted galvalume aluminum zinc coating GI based corrugated trapezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

M&L for second class hardwood as in scantlings clean sawn timber fixed including dismantling of old unserviceable scantling from its positions complete all as specified and as directed.

Taking down chowkhat or frames not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.