Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.9 L
Closing Date
20 Mar 2026, 5:30 amClosed
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
New Temperature Controlled Welding shop inside HAL Factory Lucknow
24972
HAL-AD/9904/4808/CE/2026/
Limited
Works
Accessories Complex - Lucknow Divn - Works - Civil
| # | Company Name | Location | Address |
|---|---|---|---|
| 1 | CLIMATIC CONTROLS PRIVATE LIMITED | MUMBAI,India | 24/25,, NAVKETAN INDL PREM CO-OP SOC LTD.,OPP ONIDA HOUSE,, SHANTI NAGAR, MAHAKALI CAVES ROAD,, ANDHERI EAST,, Mumbai Suburban, Maharashtra, 400093,,MUMBAI,Maharashtra,India,Pin-400093 |
| 2 | M/s D O Consruction Co. | Kanpur,India | F Block,H. No. 44 Panki,Kanpur,Uttar Pradesh,India,Pin-208020 |
| 3 | M/S Johar Infrastructures | Lucknow,India | 206, Gulmarg Aparment, Moti Nagar,,Lucknow,Uttar Pradesh,India,Pin-226004 |
CLIMATIC CONTROLS PRIVATE LIMITED
MUMBAI,India
24/25,, NAVKETAN INDL PREM CO-OP SOC LTD.,OPP ONIDA HOUSE,, SHANTI NAGAR, MAHAKALI CAVES ROAD,, ANDHERI EAST,, Mumbai Suburban, Maharashtra, 400093,,MUMBAI,Maharashtra,India,Pin-400093
M/s D O Consruction Co.
Kanpur,India
F Block,H. No. 44 Panki,Kanpur,Uttar Pradesh,India,Pin-208020
M/S Johar Infrastructures
Lucknow,India
206, Gulmarg Aparment, Moti Nagar,,Lucknow,Uttar Pradesh,India,Pin-226004
₹0
₹2.9 L
28 Feb 2026
28 Feb 2026
28 Feb 2026
20 Mar 2026
Name of the Individual / Firm / Company: * Mandatory
Type of ownership Pvt. Ltd. / Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
Contact details
Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-
List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.
PAN No.:
Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.
Goods and Service Tax ID No.
SAC (Service Accounting code) along with the tax structure.
Income Tax Returns for the last three years
Annual turnover for the last five years.
Plant & Machinery details for the work.
Proposed work completion schedule in the form of bar-chart and monthwise billing plans.
Value of work on hand as on date of submission of tender duly certified by CA also indicating the stipulated period of completion (required for bid capacity also)
Bank Balance Statement for the last thee months.
Overdraft facilities available with the agencies.
Balance sheet for the last five years.
List of supervisor/ technical staff/
Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]
EMD of Rs.289960.00
Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]
(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.
(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.
(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Details of person holding the power of Attorney (If different from contact person)
DECLARATION I
DECLARATION II
DECLARATION III
Description of item
Surface dressing of uneven surface not exc. 15 cm deep, cutting & filling, including cutting of wild growth, jungle, cutting and uprooting of plants/ wild vegetation etc. also removal of surplus earth, wild growths, plants etc as directed by EIC upto lead of 50 Mtr and lift upto 1.5m or part there of, including cost of all labours, materials, equipments, machineries, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all kinds of soil, complete for foundations, column footing, wall foundation, manholes, post holes, trenches etc. including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if required, dressing the sides, dispoal of excess surplus soil, including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means for all kinds of soil over areas (exceeding 30cm in depth,1.5 m in width or 10 sqm on plan) including extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. including dressing of sides and ramming of bottoms, for all lift for all kind of soils,, including getting out the excavated soil and disposal of surplus excavated earth, lead upto 50 m. & Lift upto 3m, including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if required, dressing the sides, dispoal of excess surplus soil, including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.
Providing and making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet, including cost of all labour, material, wastage, transportation, T&P, etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer in charge.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating, dressing including cost of all labours, materials, compaction equipments, machineries, transportation, and T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift, including cost of all labours, materials, compaction equipments, machineries, and T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.
Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, column, footing, trench, appron,floor,under ground tank, post hole, platform under floors or any other similar description of works eg. drains, pipe lines bedding layers, road, chambers excluding the cost of centring and shuttering, including form work, compaction, curing, materials, labour, mechanical mixing, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.
Providing & laying reinforced cement concrete 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregat 20 mm nominal size of Bharatcoop/Dala/Jhansi) in sub-structure upto plinth beam e.g. column, footing, plinth beam, floor, pavement, drain, chilled water trench,underground water tank, including, compaction, curing, materials, labour, mechanical mixing, making contraction joints/grooves (if required), wastages, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and laying in position ready mixed or site batched design mix cement concrete 1:1:2 (1 cement: 1 coasre sand: 2 graded stone) of M25 grade with minimum cement content of 330 kg /cum for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including making of expansion/contraction joints, construction joints wherever required as per IS Code & required at site, making of grooves, pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works upto plinth level for Footings, Plinth Beam, Grade beam or any similar structure etc.
All works above plinth level upto floor V level for Column, Slab. Roof beams or any similar structure etc.
Providing & laying reinforced cement concrete 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregat 20 mm nominal size of Bharatcoop/Dala/Jhansi) in super structure i.e. above plinth beam eg. column, slab, beam, lintel, chajja, fascia, circular column / structure, etc or any other similar description of works, including form work, side shuttering, compaction, curing, materials, labour, mechanical mixing, including making of expansion/contraction joints, construction joints wherever required as per IS Code & required at site, making of grooves, wastages, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing, fabricating, fixing and removing, form work / shuttering of side of concrete, foundation, footings, base of coloum, slab, lintel, beams side etc. for all type of RCC work in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering, all supports with MS or wooden including all braces, struts, balli, working scaffoldings, ladders, wastage labour, material, T&P, transportation, etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.
in sub-structure upto plinth beam e.g. column, footing, wall, plinth beam, chilled water trench, water tank etc.
In Super-structure above plinth beam e.g. column, beam, sill, projection slab, slab, chhajja, fascia, fins, staircase etc.
Providing and laying brick work half brick thick walls in cement mortar 1:4 ( 1 cement :4 Coarse sand) with bricks of sub Class ‘A’ with minimum average crushing strength 75 kg/ cm² using well burnt locally available bricks, laid straight or curved on plan not exceeding 6.00m, mean radius including providing and placing in position 2 Nos 6mm dia. bars at every third course of half brick masonry. etc. including cost of all labours, materials, scaffolding, necessary cutting of bricks, wastage, straight or curved work, loading, unloading, transportation, curing, raking out joints up to 1 cm depth as the work proceeds, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.
Providing and laying class 'A' old size brick 7.5 designation old size brick (having crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand) in foundation, drains, manholes, chambers, ducts, chiiled water trench, toe wall, water tank, etc or any description of similar works, including necessary cutting of bricks as required, wastages, straight or curved, work up to any height or depth, cost of scaffolding, raking out joints up to 1 cm depth as the work proceeds, cost of material, labour, T&P, curing, wastage, transportation, loading, unloading, etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and laying class 'A' old size brick (having crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand), in superstructure above plinth level up to floor V level in all shapes and sizes, walls, ducts, or any description of similar work, including necessary cutting of bricks as required , wastages, straight or curved, work up to any height or depth, cost of scaffolding, raking out joints up to 1 cm depth as the work proceeds, cost of material, labour, T&P, curing, wastage, transportation, loading, unloading, etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls/ceiling, of rough / fair faces of brick wall / concerete surface of any description including jambs, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement, including cost of all labour, material, scaffolding, curing, hacking of concrete surfaces, wastages, making joints/grooves (if required), T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1: 6 (1 cement: 6 coarse sand) on wall & ceiling of rough / fair faces of brick / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including making contraction joints / grooves, hacking of concrete surfaces, T&P etc as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and applying white cement based putty of make Birla/ Asian / Berger or as approved by EIC, of average thickness 01 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)
Providing & applying two coats of finishing walls with Acrylic Smooth exterior paint of required shade; New/old work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.of first quality of approved shade and make like apex ultima of Asian /weather coat long life of Berger / weather shield max of ICI etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)
Providing & applying two coats or more of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved make & shade such as Asian/Berger/ICI or as approved by EIC, to walls of any description at any height / depth of required shade and colour all complete to achieve even shade and colourn new/old work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre including preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings to doors, windows, floors, fittings to protect from splashes, removing and replacing furniture's, moveable cupboards, chicks, blinds, washing floors, cleaning glass, joinery, leaving the premises clean neat and tidy including disposing rubbish outside in dustbins, cost of all labours, materials, loading, unloading, scaffolding, wastages, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)
Providing and laying deformed or twisted steel reinforcement ISI mark TMT Bars of make RINL/SAIL/TISCON/, as approved by EIC of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, welding, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, loading & unloading, welding,T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and making connection of drain or sewer line with existing manhole for pipes 100 to 250 mm diameter including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), cement plastered on both sides (inside or outside surface) with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement, curing, cleaning and finishing the surface properly and making necessary channels for the drain etc. including all material, labour, T&P, scaffolding, wastage etc. required for proper completion of work all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing tiled false ceiling of approved make Armstrong/ Knauff or as approved by EIC of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24 x 24 x 0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T sections shall be pre-painted with polyester paint, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by EIC, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) or as per site requirement, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels, area of slab over 0.50 sqm including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
For providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps, moulding, rubbing and polishing of cut edges etc. complete including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and laying glazed vitrified tile polished / matt finish of size ( 600 X1200 )mm or as per site requirement of shade, size & of make Kajaria/ Johnsons/ Nitco/ Somany, as approved by EIC, in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc, The tiles must be cut with the zero chipping diamond cutter only, laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily including cost of all labours, materials, scaffolding and T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Prior Sample shall be approved by the EIC).
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of size 300x450mm/ 300x600mm or as required at site of make Kajaria/ Johnsons/ Nitco/ Somany or as approved by EIC, in all colours, shades, in skirting, risers of steps and dados, over 12 mm (average) thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade, cost of all labours, materials, scaffolding, curing, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material).
Providing and laying Ist quality rectified Glazed Ceramic floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of size 300 x 300 mm / 600 X 600 or as required at site & make Kajaria/ Johnsons/ Nitco/ Somany or as approved by EIC, in all colours, shades burgundy, bottle green, black, in skirting, risers of steps and dados, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sgm including pointing the joints with white cement and matching pigments of matching shade, cost of all labours, materials, scaffolding, curing, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material).
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat of Frame size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawl strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length including cost of all labours, materials, scaffolding, curing, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note: M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter 30mm thick of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including cost of all labours, materials, scaffolding, curing, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
Providing and fixing IS : 12817 marked Stainless Steel butt hinges (125x64x2.50mm) with Stainless Steel screws etc. including, cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing Aluminium sliding door bolts 300 x 16 mm, ISI marked powder coated (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws, including cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing aluminium powder coated tower bolts 300 mm x 10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws, including materials, labour, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing aluminium powder coated handles 125 mm, ISI marked powder coated (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, including, cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing twin rubber stopper aluminium hanging floor door stopper, ISI marked, powder coated (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws, including cost of labour, materials, T&Petc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing Aluminium extruded section body tubular type universal hydraulic door closer of approved brand and manufacture like Godrej/ Amar /Everest as approved by EIC (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws, including cost of materials, labour, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing & Fixing decorative high pressure laminated sheet 0.9- 1.0mm thick of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality and make Fevicol/ Pidilite etc as approved by EIC including cost of all materials, labours, T & P, making provisions for harware fittings, etc as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing Powder Coated Aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required, thickness of aluminium section shall be 1.5 - 2.00 mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (All fittings like -Glazing, paneling and dash fasteners to be paid for separately) including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing powder coated Aluminium (minimum thickness of powder coating 50 micron ) work for shutters of doors, windows & ventilators including hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required thickness of aluminium section shall be 1.5 - 2.00mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note: Glazing, paneling and dash fasteners to be paid for separately)
Providing and fixing glazing in Aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in-charge (Cost of Aluminium snap beading shall be paid in basic item) with float glass panes of 5.0 mm avg thickness of make Saint Gobain/Modigaurd or as approved by EIC.(weight not less than 12.50 kg / sqm) including cutting straight or curved as per site requirement, rounding off edges jointing with steel screws as per architectural drawings and including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.
Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides in panelling, flat pressed three layer or graded wood particle board of approved brand such as CenturyPly/ Action TESA/ Green panel/ Novopan etc. conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws, including cutting to size, squaring, finishing, cleaning etc. including cost of all materials, labours, T & P, cutting wastages, pattern, design, colour etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (sample is to be approved before procurement of work)
Providing and fixing Vertical venetian blinds of 75/ 100mm width of approved colour & texture/pattern (approved designs printed / plain) including its hardware mechanism of repuated manufacturer such as Vista, Aerolux, MAC or as approved by EIC, all complete with material, fixing, fixing accessories, making holes in concrete / brick wall, making good, wastage, including cost of all materials, labours, T & P, cutting wastages, making provisions for hardware fittings, pattern, design, colour etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (sample is to be approved before procurement)
Providing and laying Chequerred precast cement concrete tiles 22 mm thick Dark shade pigment using ordinary cement in footpath,courtyard,Approach & or as required on site, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement and matching pigments of matching shade , including cost of all labours, materials, scaffolding and T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. . (Note- Prior Sample shall be approved by the EIC).
Providing and laying factory made chamfered edge Cement Concrete paver blocks, 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern in footpath, approach, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)
Providing, laying and fixing pre- cast drain/ trench covers in reinforced cement concrete 1:1.5:3 (1cement, 1.5 coarse sand, 3 - 20 mm size graded stone aggregate of Bharatcoop/Dala/Jhansi) and all edges properly finished and set at position with cement mortar 1:3 (1cemennt, 3 coarse sand), suitable arrangement for lifting and placing at site, including form work, side shuttering, compaction, curing, materials, labour, mechanical mixing, making contraction joints/grooves (if required), wastages, transportation, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing, Fabricating & fixing of Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, welding, cut to shape, bending, fixing in position and applying a priming coat of approved steel primer all complete, MS Angle, flat, purlins, crain, gantries, rails & fasteners and heavy bracket beam, Tee, angle, channel, tubular, rectangular, square, flat, (all required sections including distance pieces, cleats, base plates, nut bolts, tie road, foundation bolt etc), including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and laying matt finished vitrified tile of size 100 x100 x16mm/ 600x 600 x 16mm / 300x 300 x 16mm / 200x 100x 16mm or as approved by EIC ( size of tile will be as per suitability of site condition) having water absorption less than 0.5% , flexural strength more than 38 N/Sqmm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of size 550X400X380 mm/ 530X400X380mm / 515X360X405mm or as per site requirement or approved by EIC of make Cera/ Plumber/ Parryware/ Hindware as approved by EIC with seat and lid, 10 litre low level P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid including the cost of all approved materials , labour, wastages, testing, T&P at all heights etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing white vitreous china flat back half stall urinal make Cera/ Plumber/ Parryware/ Hindware as approved by EIC of size 580x380x350mm or as per site requirement with range of single half stall urinals with 5 litre PV.C. automatic flushing cistern. with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in D.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required including the cost of all approved materials , labour, wastages, testing, T&P at all heights etc .as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing White Vitreous China Flat back Wash basin size 550x 400 mm/ 630 x 450 or as per site requirement or approved by EIC as approved of shape and make viz. Parryware / Hindware / Cera as approved by EIC, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls where require including the cost of all approved materials, labour, wastages ,testing, T&P at all height etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing looking mirror of superior glass (of approved quality) of required shape and size with plastic/ wooden moulded frame as approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm or as per site requirement or approved by EIC of Modi /Saint Gobain or as approved make with hard board backing fixed with WPC/PVC frame of rectangular shape, approved design fixed with necessary screws etc.including the cost of all approved materials, labour, wastages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing water closet squatting pan (Indian type W.C. pan ) of make Cera/ Plumber/ Parryware/ Hindware etc. as approved by EIC with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests, including the cost of all approved materials , labour, wastages, testing, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing toilet paper holder of C.P Brass of make Hindware/Jaquar/Kohler/Viking etc as approved by EIC with C.P Brass brakets, roller and cover(wherever required), fixed in position with necessary screws, rawl plugs and other fittings including all material, labour, T&P, wastage etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing Stainless Steel A ISI 304 (18 / 8) kitchen sink without drain board of size 610 X 510 mm bowl depth 200mm as per IS:13983 with C.I./MS brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required: etc of 'Imagine/ kitchen queen/ Nirali/ Jindal/ Hindware make as approved equivalent make fixed in MS brackets, including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing P.V.C. waste pipe semi rigid pipe for sink or wash basin of approved make and standard size including P.V.C. waste fittings complete. 32 mm dia with providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and including the cost of all approved materials, labour, wastages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing designer film of make Garware/ Orchid or as approved by EIC of required pattern, self adhesive type fixed on the glasses of doors, windows and partition including cleaning of surface and preparation of surface to receive the film including cutting to required shape and size, laying properly to avoid any air bubble, leaving the suface neat and clean, cost of all material, labour, cutting, wastages, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing 15mm nominal bore uplasticised 45 cm long PVC connection pipe with brass unions etc including the cost of all approved materials,labour, wastages,testing,T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing 15 mm dia normal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, of approved make such as Cera/ L&K/ ARK/ Plumber or as approved by E.I.C., including the cost of all approved materials,labour, wastages,testing,T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25mm nominal bore including all labours, materials,T&P, loading, unloading,transporting ,cutting and welding of pipe line ( if required) including the cost of all approved materials, labour, wastages ,testing, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing glass shelf with edges round off of size 600x120x5 mm or as per site requirement of approved make such as Saint-Gobain/CERA/Borosil/Asahi India Glass (AIS) / Viking etc., supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing in position 15 mm dia nominal bore C.P. brass bib cock of approved quality conforming to IS standard of approved make such as Cera / L&K / ARK / plumber or other approved by EIC including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing C.P. brass long body bib cock/ swan neck or as approved shape and size of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore of approved make such as Cera / L&K ARK / plumber or other approved by EIC including the cost of all approved materials, labours,wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing PTMT / CP grating of approved quality with plain frame and jali set, 125mm nominal diameter square/ round grating with/ without waste hole including all labour, cutting, fixing, making good, sealing joints with all material , tool and plant, wastage etc etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing 8 mm dia C.P. / S.S. Health faucet /Jet with flexible tube upto 1 to 1.25 metre long with S.S. triangular plate to Eureopean type W.C. of suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete of standard size & make L&K, Hindware, Jaguar, essess, Prayag, Cera as approved by EIC, to be fitted to concealed water supply line including the cost of all approved materials,labour, wastages,testing, T&Petc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing 25mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, make Supreme/ Astral/ Finolex as approved by EIC including all CPVC plain & brass threaded fittings. This includes in External Work - jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, including the cost of all approved materials, labour, wastages, T&Petc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing 25mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, make Supreme/ Astral/ Finolex as approved by EIC including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including Concealed work, including cutting chases and making good the walls, painting etc testing of joints, including the cost of all approved materials, labour, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing 20mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, make Supreme/ Astral/ Finolex as approved by EIC including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including Concealed work, including cutting chases and making good the walls, painting etc testing of joints, including the cost of all approved materials, labour, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing on wall face unplasticised rigid PVC rain water pipes single socketed pipes(110mm dia) of make Supreme/Astral/Finolex or as approved by EIC, conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 110mm bend conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing 110 mm Shoe (Plain) on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion ,cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing on wall face unplasticised rigid PVC rain water pipes single socketed pipes(75mm dia) of make Supreme/Astral/Finolex or as approved by EIC, conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 75 mm bend conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and fixing powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 of approved design/pattern with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles, fixing approved anodised aluminium standard section around the opening, including cost of all labour, material, welding, T&P, wastage, transporatation, loading, unloading, cartages, etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge. (Note- only weight of grill to be measured for Payment)
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
Providing and making gola 75x75 mm in deep cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design etc., including cost of all labour, material, wastage, transportation, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer in charge.
Providing and laying in position cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size of Bharatcoop/Dala/Jhansi), including finishing Cement concrete pavement / floor , including finished with a floating coat of neat cement, including cement slurry, , including all material, labour, T&P, curing, scaffolding, wastage etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size of Bharatcoop/Dala/Jhansi) all around S.W. pipe of 100mm dia, including preparation bed concrete as per standard design or as per direction of EIC (embedded in the flooring / ground) etc. , including, compaction, curing, materials, labour, mechanical mixing, making contraction joints/grooves (if required), wastages, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.
Total (A)
Above
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 0.42 MB
PQ2.xlsx
TENDER_DOCUMENT • 0.02 MB
TECHNICALBID.pdf
TENDER_DOCUMENT • 1.76 MB
BOQ2.xlsm
TENDER_DOCUMENT • 0.14 MB
Download all tender documents and submit your bid