Special repair works to be carried out for the existing 1 No. of SI and 12 Nos. of PC/HC quarters at ARITHUVARAMANGALAM in Thiruvarur District

Amount

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

24) Manufacturing & supply of steel windows (weight basis)

37.1) White washing 3 coats (slaked)

41) Painting 2 coats - New "iron work"

52) Supplying and laying of PVC Water supply (ASTM) pipe a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

Electrical arrangements 71) Supplying and fixing of 16 Amps Double pole main switch

74) Charges for assembling and fixing of ceiling "Fan"

Annexure 2.1.3) Supplying and filling in foundation and basement with Crushed stone sand

3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand with Admixture

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture b. In First Floor

c. In Second Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture a. In Foundation and basement

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick a. In Foundation & Basement

16.1.1) Precast Jally ventilator 50mm thick using standardised concrete mix M20 Grade using crushed stone sand with Admixture a. In Ground Floor

b. In First Floor

c. In Second Floor

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

28.1) Finishing the top of flooring in C.M.1:4, 20mm thick. using crushed stone sand with Admixture

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

37.2) White washing two coats for old ceiling surfaces

38.4.3) Painting the old walls with two coats of Oil Bound Distemper over existing wall surfaces including thorough scrapping

40.1) Two coats of painting over the old wood work including Removing paint from doors, windows & wood works by manual labour

41.1) Two coats of painting over the old iron work including Removing old paint from iron surface with sand paper

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M20 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit

b) Augering 30cm dia

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

50.6.1) Precast slab 50 mm tk.in C.C.1:3:6 mixed with fibre using crushed stone sand

51.1) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark

53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

b) 160mm dia UPVC Non Pressure pipe

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose with bakelite battern holder

c. Calling bell point with Buzzer/Calling bell

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself.

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

100) Supplying and fixing of 9 watts LED Bulb

101) Supplying and fixing of 25 watts LED with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light fittings

114) Supplying and fixing of 2 wires of 10 Sqmm. PVC Aluminium Armoured LT cable 1100V with ISI mark in over head tying with one run of 7/20 GI wire

114.1) Supplying and fixing of 4 wires of 10 Sqmm. PVC Aluminium Armoured LT cable 1100V with ISI mark in over head tying with one run of 7/20 GI wire

117.1) Supplying and fixing of 2 core 10 Sqmm PVC Aluminium Armoured LT cable end termination

117.2) Supplying and fixing of 4 core 10 Sqmm PVC Aluminium Armoured LT cable end termination

119) Supplying and delivery of single phase 2 HP submersible pumpset suitable for borewell

119.1) Supplying and delivery of 3 HP Electric Monoset Centrifugal pumpset Duty - 200 lpm x 35 m

120) Labour charges for erection of submersible pumpset in borewell / openwell upto 5 HP

120.1) Labour charges for erection of Horizontal shaft, Centrifugal pumpset upto 3 HP (coupled/monoblock) in borewell / open well

121.1) Supplying and delivery of single phase panel board of direct online starter with two level guard and auto start 2 HP

121.2) Supplying and delivery of three phase panel board of direct online starter with two level guard and auto start 3 HP

122) Supplying and fixing of following dia of the GM & CI specials a) 50mm dia GM Non-Return valve

b) 50mm dia CI Foot valve with stainer

123) Supplying and Delivery of PVC insulated and sheathed 3 core 2.5 sq.mm flat type copper cable for submersible pumpset

124) Supplying and delivery of following dia GI pipes 'B' class in position for Pumpset suction pipe arrangements a) 65mm dia GI pipe

b) 50mm dia GI pipe

124.1) Labour charges for fixing the following dia GI pipe for Pumpset suction pipe arrangements in the Sump a) 65mm dia GI pipe

b) 50mm dia GI pipe

125) Supplying and delivery of following dia PVC pipe a) 40mm dia PVC pipe/10 Kg/cm2

125.1) Labour charges for laying of following dia PVC pipe below ground level a) 40mm dia PVC pipe/10 Kg/cm2

127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump

134.2) Supplying of following dia UPVC column pipe for Borewell a) 32mm dia UPVC column pipe

139) Supplying and delivery of Godrej Navtal 7 levers – 3 keys lock

166) Supplying and erection of cut stone pillar of size 0.15x0.15x2.10m vertical post

167) Providing Chain link fencing using GI wire 2"x2" using 10 gauge (of all sizes) including labour charges

168) Supplying and laying of Barbed wire fencing 10 gauge including cost of all materials

796) Two coat of Exterior emulsion paint including special primer for outer wall surfaces

796.1) Painting the old outer walls with two coats of Exterior emulsion paint without primer and including thorough scrapping

800.2) Dismantling, clearing away and carefully stacking materials useful for re-use of One Course of Pressed Tile Roof finish in cement mortar

800.3) Clean removal of cement plaster from the existing wall surfaces

800.6) Repolishing the existing old mosaic flooring rough, medium, nice finishing including cost of polishing stone, hire charges for polishing machine and cost of wax charges, electricl charges, transport charges etc

arivumani constructions

P SANKAR