Construction Work

Amount

Dismantling , removing and carefully hilux board using necessary tools and cost including of labour and tools etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling , removing and carefully wall panelling using necessary tools and cost including of labour and tools etc., complete complying with standard specification and as directed by the departmental officers at site of work

Dismantling , removing and carefully stacking Doors &windows including removal of frames,hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling , removing and carefully false ceiling using necessary tools and cost including of labour and tools etc., complete complying with standard specification and as directed by the departmental officers at site of work

Providing two legged scaffolding using 15mm dia casurina probs post of 4mm over all length (3m height + 0.50) projection + 0.50m into the ground the distance between the two rows being 1.25m and the spacing of post being 2.00m in both the row with two horizontal post with 0.50m over lap on either side sand braces at 2.00m centre to centre including longitudinal and transverse middle braces to setup and providing a platform with countrywood planks of 40mm thick and 1m width etc complete complying with standard specification and as directed by the departmental officers at site of work.

Initial height of 2.50M

Additional height of 1.00M

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed exceptin rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling M. sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Supplying and filling in foundation, basement, etc with filling quarry stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Brick Jelly Lime Concrete 1:2:5 using 40mm brick jelly in Lime Mortar 1:2 - 10 cu.m.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance using 20mm with IS:456-2000, and downgraded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/ms and maximum water cement ratio of 0.55, including admixture (super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials)

foundation and basement

For ground floor

For Second floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.

Brick work in Cement Mortar 1:6 using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for oundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge

For ground floor

For second floor

Brick partition walls of 11.50cm thickness using best quality Fly ash Brick of size 230x110x70mm with class esignation of 7.5 conforming to IS 13757-1993 orIS 12894-2002 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoopiron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc.complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

Acoustical Wall panels : Stage wall, side walls and rear walls upto 1.2 mtr height Supply & installation of wall panels Anutone Salon Slats Surco made of pinewood E1 grade fiberboard, melamine laminated finish, groove perforated slats L16-2 - (2mm grooves @16mm pitch with 27% open area), backlined with Soundtexblack acoustical fleece of 0.27mm thick, surface density 63g/m2,rear scoring with perf 10mm at 20mm pitch, tongue-groove edge for a seamless look, flame resistant (BS476 part 7) , of size 128 x2440x16mm, volume density of base board 700Kg/m3, weight 9Kg/m2 (L16), installed by using GI Strut framework system.The GI Strut framework system shall include Strut CC25, fully knurled, sectional thickness 0.45mm, length 3600mm, web 50mm, depth of 25mm and equal flanges 15mm is fastened to the wall positioned horizontally or vertically at every 600mm centres . The Strut CC18,aluminium core cross channel, thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & center brackets is then fixed perpendicular to the Strut CC25 with the help of fasteners at every 400mm centers Slats Surco Lite of size 128x 2440x16mm in then fixed perpendicular to Strut CC18 with suitable edge & centre brackets. The system is backlined with SynthPF 5x25 adhered on wall with dab spots of Anutone stick S7 adhesive. Technical Parameters Fire (Class) – BS476 part 7 , Acoustics – NRC 0.75, Thermal conductivity (W/mk)– na, Climate (°C, RH) – 50, 70, Light reflectance (%) – 75 (Maple Arce),Green (VOC, RC %) – E1, 25

Acoustical Wall panels : side wall and rear wall Upper Reaches above 1.2 mtr upto false ceiling Supply and installation of Anutone Acoustic wall fabric stretch system by using FR Grade fabric of size 1400mm width, shall be stretched by using CC 25 with infill of synth pf 5X25 mm thick, rigid vinyl Stretch Tracks half wrap/full wrap 15mm (FS15) and Midseam 15mm (FS15), strand board, synth PF infill with requisite accessories & tools. CC 25 mm is first installed on the wall along with ithe marking lines with metal fasteners inserted at 300mm centers . FS15 tracks to be installed on wooden base, after applying Stick S7 adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 150mm centers on one/both sides of Stretch Tracks. the Strand3 Fibre square edge magnesite bonded pinewood fiber panels of size 600x1200x20mm having density 400kg/m3, weight 4kg which is fixed to wall with suitable fasteners. Synth PF 5x25mm thick adhered on strand panel by using Stick 7 adhesive.Fabric of width 1400mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 1300mm. Technical parameters : Core - pinewoodfibre & polyfibre, Fire – 1, Acoustics – NRC 0.90, Climate (OC RH) – 49, 90, Termite resistance – Yes, Light reflectance – Colour dependent, Green (RC %) – 25, Hygiene (VoC, Clean room) – Low,Class 1

FALSE CEILING : Supply and Installation of Anutone Strand Nubby, square edge, magnesite-bonded,2mm wide pinewood fibre core,fully encapsulated with texture finish,Green Pro certified ceiling tile of size 595x595x15mm thk having volume density 400Kgs/m3, weight 6kg/m2 suspended using 0.3mm thick Anutone Skelet Trelis T15 metal grid system.Anutone Skelet Trelis T15 ceiling grid system, of 600x600mm module includes Anutone Skelet WA15W30 with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centres.Then suspend the Anutone Skelet MT15W36 with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of Anchor Bolt, Soffit Cleat and Suspension Rod with Levelling Clip at 1200mm centres. Anutone Skelet CT15W12 with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centres in the perpendicular direction to the Main T15. Finally Anutone Skelet CT15W06 with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 in direction parallel to the Main T15 to result in 600x600mm module. Anutone Strand Nubby panels of size 595x595x15mm thk shall be placed into the grid size of 600x600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade.Technical Parameters Fire (Class) – 1 & P Acoustics – NRC upto 0.9 (For E600 Mounting) Thermal conductivity (W/mk)– 0.07 Climate (°C, RH) – 50, 95 Light reflectance (%) – 85 Green (VoC, RC %) – Low, 30

Border Ceiling : Supplying and fabricatiing erecting and fixing Hilux or equvalent board false ceiling upto a ceiling height of 4.5m from floor level with 8mm thick hi LIC board and GI metal chanel of size 45X15X0.9mm forming a grid of 120 X60cm and anchored to the ceiling with dasg fasteners of 12.50mm dia 40mm long 6mm dia bolt and nut to the hanger of 25X25X5 of required lenth the other end of the angle fixed with bolt and nut to GI chanel . the GI frame work will be covered with 8mm thick hilux board of approved quality conforming as per direction engineer in charge. Finally finishing with putty and painting

Plastering the surface of walls with Cement Mortar 1:5 (One cement and Five plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used , curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing of wood polymer composite (WPC) door with solid door frames extruded with size 75mmx50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55 and bulk density 750kg/cub.Mt. The frame shall be fixed to the wall using 10x10mm long MS screw throught the frame by using PVC fasteners. A minimum of 4nos screw to be provided for each vertical members, Door Shutter of 25mm thick Wood Polymer Composite (WPC) single core Extruded Door Shutter, with one side digital printing of specified Design which is approved by engineering-in-charge. Both side of the shutter shall have rough sugar texture finish, laminated with UV oil. The solid WPC board shall have minimum shore hardness of 55 and Bulk density 750kg/cub.Mt moulding the thickness remains 25mm (+/-1mm) etc. complete as per the direction of the departmental officers.

Painting Old wood work with Two coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat along with putty in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat callcalic resin on cement plastered wall surface etc., complete complying with standard specification and as directed by the departmental officers.

Repairing damaged terrace tile area & wall surface with water proofing elastometric coat by removing all existing paint, putty and loose plaster over wall, cleaan surface preparation with metal brush & putty blade also complete touchup work with pop mixing with SBR chemical. For walls & terrace with SBR (Styrene Butadiene Rubber)/Acrylic primer added to the cement with 1:1.5 ratio apply one coats as a protection coating & to make the surface strong. Followed by two coat of elastomeric water proofing coating. The rate including labour charges, SBR/Acrylic primer, Elastomeric, POP and scaffolding etc complete complying with standard specification and directed by the departmental officers

Flooring with ceramic tiles of 305 x 305 x 6mm size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m.etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with 450mm x 300mm x 8mm best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Granite slabs (super fine polished with machine cut edges )Jet black and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Providing Double semi nosing to granite slab at the edges of the vertical space with neat finishing etc complete with standard specification and as directed by the departmental officers. The cost including higher charges of machines and labour charges etc complete

Providing and Fixing of PVC Trims (Corner beeding) at the outer corner profiles of the tiles including cost of material, labour and handling etc. as directed by departmental engineers at site of work and as per standard specification.

Supplying and fixing of HPL (High pressure Laminated) Urinal partition of size 1200 mm x 600 mm of thickness 12mm . The Indian Cubicle brand make of HPL panel board with fitting of SS-304 grade steel of clamps and fasteners having Design space sturdy range having extensive variety of colors, designs and sizes to suit the necessary requirements having approved equivalent brand make. The rate inclusive of all materials such as labour, lead and lift, transport, wastage, accesories etc as directed by the deptl. officer

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works)

110 mm dia

PVC Elbow

PVC Elbow with Door

PVC Tee

PVC Bend

75mm dia

PVC Elbow

PVC Elbow with Door

PVC Tee

PVC Bend

PVC reducer 110X75MM

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

20mm dia

25mm dia

32mm dia

40mm dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

Coupler

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

Elbow

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

Reducer

25 mm x 20 mm

32 mm x 25 mm

40 mm x 32 mm

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

110 mm dia

75mm dia

Renewing and fixing Angle Cock with new one of approved quality Metro or Equal Brand and approved make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works make: parryware/equivalent)

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works make: parryware/equivalent).

Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works).

110mm dia

75mm dia

Renewing the damaged broken unservicewable Health faucit with new one of Two way bib cock tap with flexible hose 15mm dia (METRO) of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Construction of inspection chamber of clear sizes 0.60 X 0.60 including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of Clay burnt Bricks of size 9” x 43/8” x 23/4” with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.

Providing Table L1800 x D900 x H750mm 25mm thk. Table Top E/B L1800mm X D900mm - 1Nos 25mm thk. Vertical Leg E/B 900mm X 750mm - 2Nos 18mm thk. Modesty 1800mm X 750mm - 1Nos Side Storage unit Size : L900 x D450 x H750 mm Mobile Pedestal ( 3 Drawer ). Table Tops and legs made out of 25mm and modesty 18mm thick Prelam Particle Board, all exposed edges are Machine pressed Edgebanding finish. 3 Draw mobile pedestals of size 400mm W x 450mm D x 650mm H completely made of 18mm Prelam Particle Board finished with 2mm thick PVC machine pressed edge banding. The rate includes labour for manufacturing, supply, transportation, etc.,

Providing Chair with back in Moulded frame covered with breathable Mesh with HEAD REST in black, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, using synchro tilting mechanism in up and down adjustments, adjustable handle & bottom five frank nylon or chrome base with castor wheel finishing chairs. The rate includes labour for manufacturing, supply, transportation, etc.,

Providing Vistior Chair with back in frame covered with breathable Mesh in black for back, with arm steel frame and leg chair 14 gauge CR round pipe legs, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, fixed arms, legs have nylon bushes. The rate includes labour for manufacturing, supply, transportation, etc.,

Providing staff room table 1200 x 600 x 750 with one drawer, one door.Table tops and legs made out of 25mm and 18mm thick prelam Particle Board, all exposed edges are Machine Pressed Edgebanding finish.The Rate includes labour for manufacturing,supply,tranportation,etc.

Supplying Chair with back in Moulded frame covered with breathable Mesh with HEADREST in black, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth. The rate includes labour for manufacturing, supply, transportation, etc.,

Providing 4 X 3 Storage made out of 18mm thick Prelam Particle Board, all exposed edges are Machine pressed Edgebanding finish. The rate includes labour for manufacturing, supply, transportation, etc.,

Writing pad chair with steel frame and leg chair with cushion,3 " 18 gauge CR round pipie legs, seat and back high density molded cushion,upholstery fire proof cloth,arms are PU soft pad and full writing pad, legs have nylon bushes the rate includes labour for manufacturing supply,transportation,etc.,

Supplying and fixing of Zeebra blind made out aluminium alloy pelmet with necessary control unit with accessories etc., Fabric composition of 100% polyester with weight of 205 g + 5% per m2 fabrics are fire retardant against korea fire equipment inspection corporation passed complying with standard specification and as directed by the departmental officers.

Renewing the damaged false ceiling with new 2 square PVC Laminated GYP sum board GYPTYEX False ceiling in the true horizontal level false ceiling grid using hot dipped galvanized steel section exposed surface chemically cleaned capping pre finished in baned poly system paint wall angle of size 3000x24mmx24mm using in periphery of the ceiling fixed to the wall partition RC columns band walls with the held of screws of 60mm main runner of size 24x35x3000mm suspended at a 1200mm c/c by using 24x14mm angles hanger securely fixed to the structural soffits of RC slab by using 6mm cross tee of size 24x26x1200mm to be inter locked between in main runner at 600mm c/c mark to form a grid of 600x600mm long cross tee of size 24x26x600mm fixed in between 1200mm long cross tee for forming a grid of 600mmx600mm finally laying high quality viny film with back side aluminium foil PVC laminated gypsum ceiling tiles regular of size 595x595x7.50mm to 8mm thick of noise reduction co-efficient NRC of 01-03 relative humidity 95% density of 780kg.m3 and light refection 0.75 etc., complete.

Providing and fixing stage for class room with wooden platform made of 50x50mm thick wooden frame work fixed at 600mm c/c in both ways and 225mm wooden leg is used to rise the false floor which is supported at 600c/c , 3 layer of 1000 gsm density 50mm synth infilled inside framework fixed on wooden platform with including 25mm thick plywood fixed on the top of frame work-and , all necessary screws, adhesives and other hardwares complete.

Providing book shelf of size 1.83m width x 2.75m height x0.46m depth separate two portions top portion height 0.97m, bottom portion height 1.28m using superior quality 19mm thick antitermite water proof plywood for shelf around rear close, shelf arrangements and shutter frame work the outer and inner portion finish with 1mm thick self designed laminated sheet and the shutter panel fixed with 5 mm thick saint gobin clear glass using 25x12mm thick tw beading both side a and making the cupboard with necessary furniture fitttings etc the rate includes cost of materials and labour charges etc complete complying with std spn and as directed by the deptl. officers

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & controlnozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Renewing the damaged M.S Pipe using 150mm x 6.30mm thick Circular Hallow Box section heavy weight including the rate of centering, concrete and decentering the masonry wall and fixing the M.S Hallow section in position with necessary welding on 8mm tk base plate, 16mm sq. rod in a M.S Hollow pipe, and necessary scaffolding , including labour for fabrication, labour for petty iron works and finally painting two coats of SEP over a primer etc., complete complying with std. specification and as directed by the departmental officers at site of work.

Renewing the damaged M.S Pipe using 80mmx4.80 mm thick Circular Hallow Box section heavy weight including the rate of centering, concrete and decentering the masonry wall and fixing the M.S Hallow section in position with necessary welding on 10mm sq. rod in a M.S Hollow pipe, and necessary scaffolding , including labour for fabrication, labour for petty iron works and finally painting two coats of SEP over a primer etc., complete complying with std. specification and as directed by the departmental officers at site of work.

Renewing the damaged corroded M.S Pipe with new one of M.S Squrare box Hallow section 100mm x 100mm x 6.00mm section heavy weight including dismantling the masonry wall and fixing the M.S Hallow Box section in position with necessary welding on guset plate fixed in a wall, including labour for fabrication, labour for petty iron works and finally painting two coats of SEP over a primer etc.,complete complying with std. specification and as directed by the departmental officers at site of work.

Supplying, erecting , manufacturing and fixing the tensile roof structure using the steel structure and membrane shall be 2 KN / m in both warp and minimum 950 GSM. The structure is to be tensioned after erection to maintain a smooth surface to minimum of 10% specified as priested levels. The complete steel structure will be 80mm dia circular pipes for truss and 100nnx100mm MS rectangular section purlin, with necessary thickness, bolts, nuts wire rope, corner plate finished with two coats of Epoxy primer, two coats of Epoxy paint and approved colour, the membeane fabric patterned with high frequency ferrari 902 Fabrics and welding rigidly and fixing the necessary special aluminium extrusions at the end of the roof truss and special screws etc .as directed by the departmental officers. etc., complete complying with standard specification.

Supplying and fixing of MS frame 75x75x2mm for acoustical door support etc complete complying with std specification and directed by departmental officers

Supply and installation of 25mm T shape teak wood beeding fixed on slats and fabric panels jointing area and L. shape corner beeding fixing on the column area slats joints. Finally finishing with melamine polish as per direction engineer in charge

Supplying and laying wooden flooring at site 8mm thick of approved make using laminated wood flooring with 4mm thickness Rubber sheet and foam 12mm thickness. The material with High-density rubber sheet thickness-4mm and Reduces impact noise, sound transmission, and provides cushioning. The core board of size 1202x192x8mm with direct pressure laminate. The cost includes cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying to standard specification.

Supplying and fixing of Acoustic door of size 1.07x2.10m of door leaf thickness 50mm with rockwool material of 48 kg/m³ covered with waterproof Laminated Plywood for durable and resistant to moisture.The door finishes with mica laminated sheet or rexin. Hardware:- High-quality hinges ( 3 no × SS304 Grade heavy-duty hinges) and door handles (SS/Aluminium acoustic-grade handle), Magnetic or lever-type acoustic lock Target STC: 35–45 dB depending on seal & layering) etc complying with standard specification

Supply and installation of 50% acoustic panels of 4 inch thickness with filling of mineral wool 48-60 kg/m³ and PU foam(25-50mm) for sound absorption. The panels covered with fabric cloth and wall backdrop with emulsion paint. The cost includes cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying to standard specification.

Supplying and laying wooden flooring at site 8mm thick of approved make using laminated wood flooring with 4mm thickness Rubber sheet and foam 12mm thickness. The material with High-density rubber sheet thickness-4mm and Reduces impact noise, sound transmission, and provides cushioning.The cost includes cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying to standard specification.

Supply and installation of 40 % Acoustical false ceiling of mineral wool 50 mm with 48-60 PU foam(25-50mm) for sound absorption.The panels covered with fabric cloth and wall backdrop with emulsion paint. The cost includeds cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying to standard specification.

Providing customized console table of Height: 2.5 ft (0.76 meters),Width: 3 ft (0.91 meters) and Length: 5 ft (1.54 meters) made of rubber wood. The frame and table top of solid rubber wood panels with termite resistant and polished finish with matte PU coating or laminate, scratch and moisture resistant and thickness of 18mm for verticals, 25mm for top load-bearing panel and edge banding with 2mm thick PVC for durability and neat edges Cable management system: Cable Trays - Powder-coated aluminum tray below tabletop for routing cables; Grommets - Circular 50 mm diameter cable; grommets on tabletop (3 pcs) Rear Cable Cutout - 2.5 inch × 1 inch slots for pass-through wires (at back edge)- Ergonomic design for comfortable working-Computer workstation- CPU Slot - 18 in (H) × 10 in (W) × 20 in (D) cabinet - Keyboard Tray - Sliding tray below tabletop, 22 in wide- Monitor Space - Top surface supports dual monitors (up to 27") -Studio controllers Mixer Surface - Central inset panel (30 in wide × 20 in deep) Weight Bearing - Can hold up to 30–40 kg of equipment Optional Rack Mount - 19" rack strips at side sections (2U each side) Monitor Space - Top surface supports dual monitors (up to 27") -Headphone amp Open Shelf - One shelf below tabletop: 6 in (H) × 20 in (D) Ventilated - Slot vents at back for airflow -Mixer & Speakers Left & Right Ends - Raised platforms: 10 in (H)× 10 in × 12 in Decoupled Base - Rubber-padded to prevent vibration transfer

Supply and installation of Acoustical wall paneling of Synth PF 1000 GSM of 25mm thick 30 kg/m³ installed by using GI frame work system. The GI frame work system includes GI Frames (48 mm (width) × 34 mm (depth) ) with UPVC fabric gripper system (20 ft (top) + 20 ft (bottom) + 12 ft (left) + 12 ft (right) = 64 ft) and open-cell polyurethane foam (tile size Tiles of 1 ft × 1 ft ) for added sound absorption and also water proof laminated plywood. The cost includes cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying to standard specification

Supply and installation of Acoustical false ceiling of Synth PF 1000 GSM of 25mm thick 30 kg/m³ for sound absorption.The panels covered with fabric cloth and wall backdrop with emulsion paint. The cost includeds cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying to standard specification.

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil)

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator)(6 points / Coil) HIgher End

Rewiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Stair case Light point.

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 5 points / Coil)

Renewal by Supply and fixing of 4’20W LED Tube Light for Fitting complete with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting.( Make: Phillips/ Havells or equivalent)

Renewal by Supply and fixing of Havells make Square type (PLUTO1X1PLS24WLED857S) fitting on ceiling with necessary connections. ( Philips / Havells/ Equivalent make).

Renewal by Supply and fixing of 42W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 9W led lamp with PVC unsheathed copper leads from terminals to the fitting.

Renewal by supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.

Renewal by supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Renewal by Supply & Fixing of 450mm wall mounting air circulator fan on the wall. (DATA-E)

Renewal by Supply and fixing of 300mm (12") sweep (Heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 225mm (9") sweep (lightduty) with inbuilt shutters AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Renewal by Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections.

Supply and fixing of 2nos.6/16A two module socket , 2 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Renewal by Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug).

Renewal by Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Renewal by Supply and fixing of 63A FP MCB isolator in Metal box FP enclosure in flush with wall and making good of the concealed portion with earth connection. (Legrand (MDS)/ Hager (L&T) make)

Renewal of Cable Management Box Size 80mmx50mm with End Cap and Joint Core including Labour charges for neatly arranging the cables & wires.

Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour

Renewal by Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. ( For 6 M and AC Plug)

Renewal by Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Renewal by Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire with painting of suitable colour. (For Seven Segment Lighting DB)

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour)

Supply and run of 2 of 6sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour)

Renewal by Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phaseMCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 24 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.( Lighting)

Renewal by Supply and run of 4 of 16 sq. mm (101/0.45) PVC insulated S.C unsheathed Cu. Conductor of 1100V grade in suitable 50mm (2”) PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. ( For vertical DB)

Renewal by Supply and fixing of 8 way vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End. ( For AC Plugs)

Renewal by Supply and clarnping of 31/2 X 120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(From Exisitng Panel to Vertical MCCB DB)

Renewal by Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection.

Renewal by Supply and providing cable end termination of 3-1/2x120sq.mm.PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and laying of 3 1/2 x 35 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and laying of 3 1/2 x 120 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and fixng of TNEB meter board suitable for 3phase 63A service connection made up of suitable angle iron frame work of size 2feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2"x1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos. 63A fuse units (500V), 1No. neutral link, copper earth flat of size 1"x1/4" with inter connection of EB meter to fuse units by 16Sq.mm PVC insulated copper wire with 3phase 4 wire KWH Power meter withsuitable necessary connection with earth connection complete

Renewal by Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B' GIpipe of dia not less than 40mm with copper earth plate of size 125mmx50mmx 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Renewal by Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Renewal by Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Renewal by Supply ,Erection,Testing and commissioning of 2.0TR 3 Star split type Air conditioner with one outdoor air cooled condensing unit and indoor evaporator with inter connection of copper refrigerant piping between condensing unit and evaporator unit electrical cabling of performing cooling ,dehumidifying air circulating filtering etc.. suitable for operation on 230V 50Hz single phase. (Carrier/Blue Star/Equ)

Renewal by Supply and fixing of 5KVA wall mounting type Automatic voltage stabilizer with time delay arrangements suitable for operation at 230 Volt, 50 Hz, AC power supply (Make: V –Guard)

Renewal by Supply and Installation of Extra copper pipe with necessary insulation, Cabling arrangement etc.

Renewal by Supply and fixing of angle iron stand for outdoor Unit.

Renewal by Supply and fixing of 1 inch PVC water drain pipe line on wall with suitable Clamp as required.

Towards charges for Core Cutting for 2 feet walls, wall opening & closing, Scaffolding and minor civil works etc..(Quotation Enclosed)(Per One Core cutting Rs.2000/-) 9 Nos of Core Cutting as per the site requirement.

Towards Charges for Servicing and Testing of 22HP VRF Air Conditioning Systems. (Including ODU units' indoor units, Communication Systems and etc,

Supply and laying of 36.90mm Hard drawn coppe refrigerant piping with Nitrile rubber hos insulation with proper clamp support to avoid the vibration and etc.

Supply and laying of 28.60mm Hard drawn copper refrigerant piping with Nitrile rubber hose insulation with proper clamp support to avoid the vibration and etc.;

Supply and laying of 15.90mm Hard drawn copper refrigerant piping with Nitrile rubber hose insulation with proper clamp support to avoid the vibration and etc.;

Supply and Fixing of VRF Refnet Joints with Hard drawn copper refrigerant piping with Nit rile rubber hose insulation with proper clamp support to avoid the vibration and etc.,

Supply, Fixing, testing and Commissioning of Ball Valves, Drier and accessories etc.,

Supply, Fixing, testing and Commissioning of VRF Main Mother Control Inverter Board along with 5Nos Communication Secondary board for 22HP VRF ODU

Supply and filling of R-410A Refrigerant

Supply and Installation of 125 Devices Addressable Fire Alarm Panel with LCD display for type of alarm, zone and time of activation, super large LED display. History of upto 100 logs can be stored. RS 232 port for online connectivity with other computers. Battery backup and inbuilt charger available for 12 V 1.5 AH battery.

Supply and Installation of addressable Smoke Detectors with base and LED to operate on 24 V dc supply.

Supply and Installation of Electronic hooter 5 watts wall mounting type.

Supply and Installation of Manual call point wall mounting type to work on 24V dc supply.

Supply & installation of 4 Zones Control modules wall mounted type with in built power card, Data Card to work on 24 Volt DC supply.

Supply & installation of 2 core X 1.5 sqmm copper armoured cable fixed on wall or ceiling with all fittings including clamps, screws, etc.

Renewal by Supply and fixing of 24W LED (Ceiling out -175mm) round type Recessed fitting with LED (Higher end) on false Ceiling with PVC unsheathed copper leads from terminals to the fitting.

Renewal by Supply and fixing of FIxed Spot Light ( Havells Make: UNECO FIXED DOWN LIGHT-15W) Recessed type Fitting on false ceiling with PVC unsheathed Copper leads from terminals to the fitting.

Renewal by Supply and Fixing of BrightLyt Hanging Lights for Living Room, Pendant Light for Home Decoration, Drawing Room Center Hanging Lamp, Dining Table Ceiling ChandelieBRAND:- BrightLyt, MATERIAL:- Metal & Glass, COLOR:- Black & White, FINISH :- Black Powder Coated, SIZE :- Mentione in Images.HOLDER TYPE: - E27 or E26 Bulb Holder (BULB NOT INCLUDED), To Buy Suitable Bulb Search Code " BOCFDWFRM1" on Amazon.DECORATION:- Best Suited For Ceiling Center of Dining Room, Bedroom, Living Room, Cafe, Corridor, Coffee Shop. (Podcast-3 nos,Vocal booth -5 nos)

Renewal by Supply and fixing of 2 nos.6/16A two module socket , 2 nos. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections.

Renewal by Supply and fixing of 1 no.6A two module socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections.

Renewal by Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections.

Renewal by Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.

Renewal by Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. ( For 6 M and AC Plug)

Supply and fixing of Prolight 370W Tunable White and colourful LED soft light with pixels and lighting effects 370w RGB+Warm white LED source(driven @220W) CRI>94;R9>88,8;TLCI>92 Control resolution 16-bit dimmer,colours with 4 leaf Barndoor"

Supply and fixing of Prolight Profile light RGB + Lime LED Ellipsoidal with HD dimming and extensive colour palette Colour mixing: RGB + lime / full colour White presets: 2.700 K~10.000K"

Supply and fixing of Prolight Freshnal light 350'N IP65 6 colour LED Fresnel with 200mm/8" glass lens High quality CCT reproduction and advanced color control New UI with 2.8" display and 4 backlit pushabie encoder"

Supply and fixing of 4 leaf Barndoor Material - High - grade aluminium or steel leaf Configuration - 2 vertical + 2 horizontal blades Mounting Compatibility - Fits gel frame slot or front ring of fixture Size Options - 4", 6", 8", 10" or universal for 1x1 LED panels finish - Black matee anti- reflective powder coating

Supply and fixing of STUDIO railing unit system payload 100kg;Extensible pantograph from 40 to 200 cm :Maximum 12Kg load on each pantograph

Supply and Installaion of 0.15mm Tinned 4 CORE Copper Microphone cable ,Durable Construction: This 4-core wire features a sturdy, tinned copper core for enhanced durability and conductivity,Versatile Usage: With a core diameter of0.15mm,The wire features four colour-coded cores, making it easier to identify and organise wiring. Make:TRI-COM / Eq.

Supply and Installation of 3-Pin M Cable MT XLR ,3 pole male cable connector with Nickel housing and silver contacts. Make:Neutrik /Eq.

Supply and installation of 3-Pin Female Cable MT XLR, 3 pole female cable connector with Nickel housing and silver contacts. Make:Neutrik / Eq.

Supply and installation of Phono Connector,3 pole 1/4" professional phone plug, nickel contacts,nickel shell width of 14.5mm. Make:Neutrik / Eq.

Supply and installation of 1 inch PVC pipe on wall and ceiling. Make:Neutrik / Eq.

Supply and installation of desk top computer with 10-core CPU, 10-core GPU, 16core Neural Engine 60.96cm (24"),4.5K Retina display 2 Standard glass 32GB unified memory 1TB SSD storage Four Thunderbolt 4 ports Gigabit Ethernet Magic Mouse Magic Keyboard with Touch ID for students.Make:Apple M4/Eq.

Supply and installation of software(yearly Subscription) for makes 2048 aodios,64 videos,full audio post work flows, music creation fast, fluid, providing a complete set of tools to create, record, edit, mix audio with a massive collection of plugins, instruments, and sounds. Make:Protools/Eq.

Supply and installation of Studio monitor with quality components and design,it serves beautifully in a variety of capacities, performing just as well with instrumental music as with electronic music,tonal Balance doesn't change with an increase or decrease in volume. Make:Focla Alpha 50 /Eq.

Supply and installation of Headphones with an extremely wide, dimensional sound stage and ultra-precise localization,Uncolored frequency response for honest, dynamic sound reproduction across the full spectrum Innovative low-frequency cylinder system for full, accurate, and clearly defined low end,Precision-engineered ergonomics eliminate pressure points and deliver supreme, flexible, lightweight comfort. Make:Sennheiser Hd 490 Pro Plus/Eq.

Supply and installation of soundcard for Personal Computer,Supported Software - All audio recording software Connectivity Technology- USB,Number of Channels,POWERFUL STUDIO-GRADE 18- IN / 20-OUT AUDIO INTERFACE FOR THE ESTABLISHED PRODUCER. Make:Focusrite clarett+8 pre faculty /Eq.

Supply and installation of 12 channel audio mixer with Professional Audio Mixing Console with Hybrid Input Ports, Individual Phantom Power,Dual AUX output, Bluetooth Connectivity and 99 Digital Effects. Make:Xtreme Acoustics XAM1202 /Eq.

Supply and installation of Speaker Stands with Material -Alloy Steel/ Colour-Black/Item Weight-6, Kilo grams/ Finish Type -Powder, Coated /Height -adjustable stand,990 mm(39") and 1470 mm(58") are the minimum and maximum heights. Locking pin ensures stable top square plate is 9" x 9" (230 mm x 230 mm). Make:Alzarsi/Eq.

Supply and installation of mic stand for Boombox Microphone and Pop Filter For Microphone,Recording Microphone Material-Metal. Make:Branded/Eq.

Supply and installation of Note Stand with Collapsible stand and foldable sheet music for orchestra, music players and musicians,Durable Aluminum alloy stand, lightweight and easy for carry and storage,Height adjustment. Make:Branded/Eq.

Testing and Commissioning of External hard drive and storage installation,4K monitor and display installation, Professional video camera installation (e.g. 4K resolution, HDR), Professional lighting installation (e.g. LED panels, softboxes),Professional lighting installation (e.g. LED panels, soft boxes),Grip equipment installation (e.g. dollies, jibs),HDMI and SDI cable connection and testing,Power cable management and setup including one year onsite warrenty with hardware replacement and software updation.

Supply and installation of desk top computer with 24-core CPU, 60-core GPU, 32-core Neural Engine 64GB unified memory 1TB SSD storage Front: Two Thunderbolt 4 ports, one SDXC card slot Back: Four Thunderbolt 4 ports, two USB-A ports, one HDMI port, one 10Gb Ethernet port with 3.5mm headphone ack for faculty. Make:Apple M4/Eq.

Supply and installation of software for the Photoshop,llustrator,Premiere Pro,Acrobat Pro,Adobe Express,Adobe Firefly,After effects,InDesign, Light room, Adobe XD/Audition, Animate, Dreamweaver, InCopy,Lightroom Classic Character, imator, Capture, Adobe Fresco,Bridge Photo shop Express Media Encoder,Aero Lightroom Web/Acrobat Reader Adobe Scan,Fill & Sign. Make:Adobe Software/Eq.

Supply and Installaion of 0.15mm Tinned 4 CORE Copper Microphone cable ,Durable Construction: This 4-core wire features a sturdy, tinned copper core for enhanced durability and conductivity,Versatile Usage: With a core diameter of0.15mm,The wire features four colour-coded cores, making it easier to identify and organise wiring. Make:TRI-COM / Eq.

Supply and Installation of 3-Pin M Cable MT XLR ,3 pole male cable connector with Nickel housing and silver contacts. Make:Neutrik /Eq.

Supply and installation of 3-Pin Female Cable MT XLR, 3 pole female cable connector with Nickel housing and silver contacts. Make:Neutrik / Eq.

Supply and installation of Phono Connector,3 pole 1/4" professional phone plug, nickel contacts,nickel shell width of 14.5mm. Make:Neutrik / Eq.

Supply and installation of 1 inch PVC pipe on wall and ceiling. Make:Neutrik / Eq.

Supply and installation of 40m 4k high end OFC HDMI cable with connectors. Make:Honeywell/ Eq.

Supply and installation of 7-in-1 TypeC Docking Station with 4 KHDMI,7-in-1 Type C dock turns a single USB-C port into 7 ports , connectivity via Type C Cable for multi-purpose use such as data transfer, charging, hassle-free connectivity & ultimate video & audio transmission through HDMI,Type C 3.0 port supports PD charging 100W.USB 3.0 provides data transfer speed of upto 5GBPS,Dual USB 2.0 ports provide data transfer Make:Honeywell/Eq.

Supply and installation of 75 inch LED TV with Resolution: 4K Ultra HD (3840 x 2160) | Refresh Rate: 60 hertz | BRAVIA 3 LED,Connectivity: 4 HDMI ports to connect set top box, Blu Ray players, gaming console,2 USB ports to connect hard drives and other USB devices,Sound : 20 Watts Output,2ch |Bass Reflex Speaker,Dolby Atmos,Ambient Optimization,2 Full Range (Bass Reflex),Smart TV,Display : 4K LED | 4K HDR Processor X1 | Triluminos PRO | 4K X-Reality PRO | MotionFlow XR 100 | HDR10/HLG, Dolby Vision. Make:Sony K-75S30B /Eq.

Testing and Commissioning of Video editing software installation (e.g. Adobe Premiere Pro, Avid Media Composer),Video editing workstation installation,External hard drive and storage installation,4K monitor and display installation including one year onsite warrenty with hardware replacement and software updation.

Supply and installation of desk top computer with 24-core CPU, 60-core GPU, 32-core Neural Engine 64GB unified memory 1TB SSD storage Front: Two Thunderbolt 4 ports, one SDXC card slot Back: Four Thunderbolt 4 ports, two USB-A ports, one HDMI port, one 10Gb Ethernet port with 3.5mm headphone ack for faculty. Make:Apple M2/Eq.

Supply and installation of Studio monitor with quality components and design,it serves beautifully in a variety of capacities, performing just as well with instrumental music as with electronic music,tonal Balance doesn't change with an increase or decrease in volume. Make:Focla Alpha 50 /Eq.

Supply and installation of desk top computer with 10-core CPU, 10-core GPU, 16core Neural Engine 60.96cm (24"),4.5K Retina display 2 Standard glass 32GB unified memory 1TB SSD storage Four Thunderbolt 4 ports Gigabit Ethernet Magic Mouse Magic Keyboard with Touch ID for students. Make:Apple M4/Eq.

Supply and installation of Headphones with an extremely wide, dimensional sound stage and ultra-precise localization,Uncolored frequency response for honest, dynamic sound reproduction across the full spectrum Innovative low-frequency cylinder system for full, accurate, and clearly defined low end,Precision-engineered ergonomics eliminate pressure points and deliver supreme, flexible, lightweight comfort. Make:Sennheiser Hd 490 Pro Plus/Eq.

Supply and installation of soundcard for Personal Computer,Supported Software - All audio recording software Connectivity Technology- USB,Number of Channels,POWERFUL STUDIO-GRADE 18- IN / 20-OUT AUDIO INTERFACE FOR THE ESTABLISHED PRODUCER. Make:Focusrite clarett+8 pre faculty /Eq.

Supply and installation of soundcard with Personal Computer/Supported Software- Studio One/Connectivity Technology- USB/Number of Channels-8/Two of the best performing mic preamps the Scarlett range has ever seen, now with switchable Air mode to give your recordings a brighter and more open sound,Two high-headroom instrument inputs to plug in your guitar or bass,Six balanced line inputs for connecting synthesizers, drum machines and other line-level sources,High- performance converters enable you to record and mix at up to 24-bit/192kHz,Four balanced outputs for clean monitoring and sending audio out to effects pedals or other outboard gear. Make:Focusrite Scarlett /Eq.

Supply and installation of software(Yearly Subscription) for the Photoshop,llustrator,Premiere Pro,Acrobat Pro,Adobe Express,Adobe Firefly,After effects,InDesign, Light room, Adobe XD/Audition, Animate, Dreamweaver,InCopy,Lightroom Classic Character, imator, Capture, Adobe Fresco,Bridge Photo shop Express Media Encoder,Aero Lightroom Web/Acrobat Reader Adobe Scan,Fill & Sign. Make:Adobe Software/Eq.

Supply and installation of 75 inch LED TV with Resolution: 4K Ultra HD (3840 x 2160) | Refresh Rate: 60 hertz | BRAVIA 3 LED,Connectivity: 4 HDMI ports to connect set top box, Blu Ray players, gaming console,2 USB ports to connect hard drives and other USB devices,Sound : 20 Watts Output,2ch |Bass Reflex Speaker,Dolby Atmos,Ambient Optimization,2 Full Range (Bass Reflex),Smart TV,Display : 4K LED | 4K HDR Processor X1 | Triluminos PRO | 4K X-Reality PRO | MotionFlow XR 100 | HDR10/HLG, Dolby Vision. Make:Sony K-75S30B /Eq.

Testing and Commissioning of Video editing software installation (e.g. Adobe Premiere Pro, Avid Media Composer),Video editing workstation installation,External hard drive and storage installation,4K monitor and display installation including one year onsite warrenty with hardware replacement and software updation.

Supply and installation of Centerlized Server with Costomized 20 TBSSD Hard Disk with AMD Ryzen R1600 (2 Core / 4 Thread) Upto 3.1Ghz,32GB DDR4 SODIMM Memory Included, 500GB x 2 nos Nvme, M.2 Drives for Read and Write Cache Connectivity Four built-in 1GbE ports with easy 10GbE optional Scalability Up to 15 drive bays with 2 DX517 expansion units Multi-Layered Backup Back up files, folders, physical devices, VMs, and SaaS applications with free solutions, and protect your NAS with built-in technologies. Make:Synology/Eq.

Supply and installation of Cat6A UTP armoured cable with pvc pipe on wall and ceiling. Make:D-Link/Eq.

Supply and installation of Cat6A modular 24 port patch panel fully loaded. Make:D-Link/Eq.

Supply and installation of Laptop with Core i5-13450HX| NVIDIA RTX 3050, 6GB (16GB RAM|1TB SSD, FHD|Window11, Processor: 13th Generation Intel Core i5-13450HX (up to 4.60,GHz, 10 Cores, 20MB); RAM & Storage: 16 GB: 2 x 8 GB, DDR5,4800 MT/s & 1TB SSD,Graphics & Display: NVIDIA GeForce RTX 3050, 6GB GDDR6 &15.6" FHD Narrow 120Hz 250 nits,Keyboard: US English Orange Backlit Keyboard with Numeric Keypad and G-Key // Warranty: 1 Year Basic Onsite Service after remote, diagnosis with Hardware-Only Support. Make:Dell G15-5530/Eq.

Testing and Commissioning of the above server room equipments.

Supply and installation of desk top computer with 10-core CPU, 10-core GPU, 16core Neural Engine 60.96cm (24"),4.5K Retina display 2 Standard glass 32GB unified memory 1TB SSD storage Four Thunderbolt 4 ports Gigabit Ethernet Magic Mouse Magic Keyboard with Touch ID. Make:Apple M4/Eq.

Supply and installation of Integrated News Room Application Development with Key Features of 1. Story Planning and Assignment: Manage story ideas, assignments, and deadlines in a centralized calendar. 2. Research and Archive: Access a vast archive of news stories, images, and videos, and conduct research using advanced search tools. 3. Scriptwriting and Editing: Create, edit, and approve scripts in a collaborative environment. 4. Media Asset Management: Store, organize, and share media assets, such as images, videos, and audio files. 5. Broadcast Automation: Automate broadcast workflows, including playlist creation, scheduling, and playout. 6. Social Media Integration: Publish news content directly to social media platforms. 7. Collaboration Tools: Enhance teamwork with real-time messaging, video conferencing, and task assignment. 8. Analytics and Reporting: Track news performance, audience engagement, and ratings using advanced analytics and reporting tools.

# Technical Requirements 1. Front-end: Develop a user-friendly interface using HTML5, CSS3, JavaScript, and a modern front-end framework (e.g., React, Angular). 2. Back-end: Design a robust back-end using a server-side programming language (e.g., Node.js, Python), a database management system (e.g., MySQL, MongoDB), and a RESTful API. 3. Database: Implement a scalable database solution to store and manage large volumes of news content, metadata, and user data. 4. Integration: Integrate the software with existing newsroom systems, such as broadcast automation, media asset management, and social media platforms. 5. Security: Ensure the security and integrity of the software and its data by implementing robust authentication, authorization, and encryption mechanisms including hardware replacement and software updation. Make:Integrated News Room Application Development Software /Eq.

Supply and Installaion of 0.15mm Tinned 4 CORE Copper Microphone cable ,Durable Construction: This 4-core wire features a sturdy, tinned copper core for enhanced durability and conductivity,Versatile Usage: With a core diameter of0.15mm,The wire features four colour-coded cores, making it easier to identify and organise wiring. Make:TRI-COM / Eq.

Supply and Installation of 3-Pin M Cable MT XLR ,3 pole male cable connector with Nickel housing and silver contacts. Make:Neutrik /Eq.

Supply and installation of 3-Pin Female Cable MT XLR, 3 pole female cable connector with Nickel housing and silver contacts. Make:Neutrik / Eq.

Supply and installation of Phono Connector,3 pole 1/4" professional phone plug, nickel contacts,nickel shell width of 14.5mm. Make:Neutrik / Eq.

Supply and installation of 1 inch PVC pipe on wall and ceiling. Make:Neutrik / Eq.

Supply and installation of 40m 4k high end OFC HDMI cable with connectors. Make:Honeywell/ Eq.

Supply and installation of 7-in-1 TypeC Docking Station with 4 KHDMI,7-in-1 Type C dock turns a single USB-C port into 7 ports , connectivity via Type C Cable for multi-purpose use such as data transfer, charging, hassle-free connectivity & ultimate video & audio transmission through HDMI,Type C 3.0 port supports PD charging 100W.USB 3.0 provides data transfer speed of upto 5GBPS,Dual USB 2.0 ports provide data transfer. Make:Honeywell/Eq.

Supply and installation of 75 inch LED TV with Resolution: 4K Ultra HD (3840 x 2160) | Refresh Rate: 60 hertz | BRAVIA 3 LED,Connectivity: 4 HDMI ports to connect set top box, Blu Ray players, gaming console,2 USB ports to connect hard drives and other USB devices,Sound : 20 Watts Output,2ch |Bass Reflex Speaker,Dolby Atmos,Ambient Optimization,2 Full Range (Bass Reflex),Smart TV,Display : 4K LED | 4K HDR Processor X1 | Triluminos PRO | 4K X-Reality PRO | MotionFlow XR 100 | HDR10/HLG, Dolby Vision. Make:Sony K-75S30B /Eq.

Testing and Commissioning of Video editing software installation (e.g. Adobe Premiere Pro, Avid Media Composer),Video editing workstation installation,External hard drive and storage installation,4K monitor and display installation including one year onsite warrenty with hardware replacement and software updation.

Supply and Installaion of 0.15mm Tinned 4 CORE Copper Microphone cable ,Durable Construction: This 4-core wire features a sturdy, tinned copper core for enhanced durability and conductivity,Versatile Usage: With a core diameter of0.15mm,The wire features four colour-coded cores, making it easier to identify and organise wiring. Make:TRI-COM / Eq.

Supply and Installation of 3-Pin M Cable MT XLR ,3 pole male cable connector with Nickel housing and silver contacts. Make:Neutrik /Eq.

Supply and installation of 3-Pin Female Cable MT XLR, 3 pole female cable connector with Nickel housing and silver contacts. Make:Neutrik / Eq.

Supply and installation of Phono Connector,3 pole 1/4" professional phone plug, nickel contacts,nickel shell width of 14.5mm. Make:Neutrik / Eq.

Supply and installation of 1 inch PVC pipe on wall and ceiling. Make:Orbit / Eq.

Testing and Commissioning of the Video Shoot Room equipments and other accessories.

Supply and installation of dual code recording for smooth network connection 600% dynamic range with new 1/3 type 3 MOS Image sensors,22X Zoom Lens with Three Manual Rings and Ultra Low speed Seesaw zoom levers,optical image stabilizers,Digital Zoom and ND Filter. Make:Panasonic PX 270/ Eq.

Supply and installation of E mount Lens 14-24mm, 24-70mm and f2.8. Make:Panasonic / Eq.

Supply and installation of heavy duty camera tripod with Professional Tripod and Fluid Head with Ground Spreader, Padded Carry Bag and tool kit.Make:Miliboo /Eq.

Supply and installation of 24.2 MP mirrorless camera with Image processor: DIGIC X,Shooting speed: Up to 40 frames per second,Video resolution/ slow motion: 4K 60p + Full HD 180p,ISO range: 100-102400,Display: Touchscreen, Vari-Angle 3.2-type approx with 1620K dots. Make:Canon EOS R6 Mark II /Eq.

Supply and installation of memory Card with storage - 128 GB,World's* TOUGHEST & FASTEST SD Card,Read Speed-300* MB/s, Write Speed-299* MB/s,Video Speed Class-V90, Monolithic One piece. Make:Sony SF 128T/Eq.

Supply and installation of RF 50mm lens 1.8 STM Lenses with Full-Frame | f/1.8 to f/22,Compact, Lightweight Prime Lens,STM Stepping AF Motor, Customizable Control Ring,Aspherical Element, SSC Coatingr rounded 7-Blade Diaphragm. Make:Canon /Eq.

Supply and installation of RF 24-70mm Lens 2.8 Leses with High image quality and bright f/2.8 aperture zoom RF L lens,Optical image stabilization of up to 5 Stops of shake correction High speed, smooth and quiet autofocus with Nano USM Min. Focusing distance of 0.69 ft by 0.21M (wide), 1.25 ft. by 0.38M (tele),A control ring for direct setting changes. Make:Canon /Eq.

Supply and installation of RF 70-200mm Lens 2.8 Leses with Image Stabilisation of up to 5 stops,Additional Control Ring Dust and Drip Resistant Electronic floating focus control with 2 Nano USM. Make:Canon /Eq.

Supply and installation of RF 85mm Lens with high image quality and bright f/1.2 aperture L lens for EOS R System cameras,Blue spectrum refractive optics (br) Reduces chromatic aberration, Minimum focusing distance of 2.79 ft. /0.85M.A control ring for direct setting changes,One Aspheric element and one UD lens,Macro Lens Type. Lens Format: Lens Format: Full-Frame. Special Features: Aspherical,Lens compatible with Canon Mirrorless Full Frame Cameras (EOS RP, EOS R, EOS R5, EOS R6)Make:Canon /Eq.

Supply and installation of Professional Fluid Video System with Aluminum Tripod and Ground Spreader with 75mm Ball Base Fluid Head: 22 lbs payload,75mm Ball Base Fluid Head: Spring-loaded counterbalance supports up to 8.8 lb,75mm Ball Base Fluid Head: Patented bridging technology protects the pan friction control from knocks,75mm Ball Base Fluid Head, Includes 504PLONG quick release plate and a pan bar,75mm Ball Base Fluid Head: Quick release plate is slide-adjustable 3.27". Make:Manfrotto MVH502A,546GB-1 /Eq.

Supply and installation of Video Monopod with Live Fluid Head tripod stand with videographers, this sturdy and ultra-portable fluid monopod, is ideal for shooting weddings, corporate videos, interviews and documentaries, and all those dynamic situations. Make:Manfrotto Element MII/Eq.

Supply and installation of Gimbal with 2nd-Gen Native Vertical Shooting and students,Approx. 2.4x Battery Runtime, All-Scenario Solutions,Supports Dual Focus & Zoom Motors With Remote Control,LiDAR Focusing: 76,800 Ranging Points Within 20 m [6],LiDAR & Transmission Interconnectivity. Make:DJI RS 4 Pro /Eq.

Supply and installation of Wireless Cardiod Headset Microphone for Singers, Presenters and Live Sound,House of Worship, Conference Rooms and Flute Instrument,Signal to Noise Ratio ≥ 103 dBA,Receiver Principle Double Superheterodyne Wireless. Make:Sennheiser XSW - 2 ME3/Eq.

Supply and installation of in ear personal monitoring system with 24-bit digital audio and reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts. Dependable wireless coverage extends over 300 feet (90 meters) of range and eliminates dropouts. Easy to setup and operate, P3TRA215CL offers one-touch frequency scan and sync to find and assign a clean wireless channel.Make:Shure P3 TRA215 CL PSM300 /Eq.

Supply and installation of Dynamic Unidirectional Podcasting Microphone with Broadcast-quality dynamic capsule,Optimised for speech applications, Internal pop filter to minimise plosives Robust, all metal construction,Designed for use with RODECaster Pro Podcast Production Studio. Make:Rode Pod Mic/Eq.

Supply and installation of 4th Gen Supported Software Ableton Live Operaing System Windows, Mac, iOS Make:Focusrite Scarlett 2i2/Eq.

Supply and installation of Studio Boom Arm mic stand with 53.98 x 20.96 x 8.26 cm; 1.54 kg,Material Neoprene. Make:Rode PSA - 1+ Arm /Eq.

Supply and installation of Stereo Handy portable Recorder with 32-Bit Float, Accessibility, X/Y Microphones, USB, Microphone, Portable, for Musicians, Podcasters, Filmmakers, Audio File Formats :- BWF, MP3, WAV. Make:Zoo H6 /Eq.

Supply and installation of Wireless Microphone System for Smartphones, Cameras, Laptops, Compact and Portable Wireless Mic Lavalier with Dual-Channel Recording, 250 Meter Transmission Range, 15-Hour Battery Life, Transmitter DMT02,Bluetooth Operating Frequency 2.400-2.4835 GHz,Battery Type,Li-on, Capacity 360mAh Receiver DMR02. Make:DJI Mic2 /Eq.

Supply and installation of Broadcast Quality Camera-Mount Wireless Mic rophone System Ideal for Reporting, YouTube, Vlogging, Filmmakers, Range: up to 100 meters/ 330 feet Omni directional Impedance 600 Ohm Battery Powered Cardioid Lavalier Condenser Frequency Response 16000 Hz. Make:Sennieiser EW112 /Eq.

Supply and installation of 12.5" 4K Monitor with 3D LUTS and HDR 4K Ultra-HD Native Resolution, Cover 137% Rec709 97% NTSC 90% DCI-P3 Color Space Color Space Peaking False Color & Time Code.Make:Lilliput BM120 /Eq.

Supply and installation of Teleprompter with advanced features and multilingual font support,Cost effective Multi-camera support Wireless Accessories,Software-based unlimited shelf life,Zero-hassle Multi-language support,Maintenance Free Monitor: 15"" LCD / TP hood with Complete Tripod mounting assembly, Hand Control/Foot Control: Optional, Wireless Accessories Software-based = unlimited shelf life,Zero-hassle Multi-language support. Make:Samvad /Eq.

Supply and installation of Professional Displays, 32 inch with 4K,HDR,HDMI,USB ports.Make:Sony /Eq.

Supply and Installaion of 15W wall mount speaker, Built-in 70V/100V transformer, plus 8 ohm direct capability. etc. Make: Bosch/ Eq

Supply and Installation of 120W Audio Mixer amplifier. Make:Bosch/Ahuja/Eq

Supply and laying of 2 core 1.5 sq mm Speaker Cable.

Supply and Installation of dual channel wireless label microphone with transmitter(2 nos). Make:Studiomaster/Eq.

Supply and Installation of 12U floor mount heavy duty audio rack with lock and key facilities. Make:Valrack/Eq.

Supply and Installation of 1 KVA Servo Voltage stabilizer with Over and under voltage correction – auto matically regulates in both conditions, Wide input voltage range for Indian conditions(140-260V), Accurate voltage control, No waveform distortion. Make :Studiomaster/Eq. (Data-A6)

Supply and Installation of 3200 Ansi Lumens Projector,XGA(1024 X 768) Resolution,Contrast Ratio:4000:1.Make:EPSON/Eq.

Supply and Installation of 6F x 4F Motorized screen with remote.Make:Liberty/Eq.

Supply and Installation of 3 feet ceiling mount kit. Make:jenefas/Eq.

Supply and Installation of 20m HDMI Cable. Make:Honeywell/Eq.

Supply and Installation of 3 core 1.5 Sq.mm power cable cable for projector with pvc pipe. Make:Orbit/Eq.

Supply and Installaion of 15W wall mount speaker, Built-in 70V/100V transformer, plus 8 ohm direct capability. etc. Make: Bosch/ Eq

Supply and Installation of 120W Audio Mixer amplifier. Make:Bosch/Ahuja/Eq

Supply and laying of 2 core 1.5 sq mm Speaker Cable.

Supply and Installation of dual channel wireless label microphone with transmitter(2 nos). Make:Studiomaster/Eq.

Supply and Installation of 12U floor mount heavy duty audio rack with lock and key facilities. Make:Valrack/Eq.

Supply and Installation of 1 KVA Servo Voltage stabilizer with Over and under voltage correction – auto matically regulates in both conditions, Wide input voltage range for Indian conditions(140-260V), Accurate voltage control, No waveform distortion. Make :Studiomaster/Eq.

Supply and Installation of 3200 Ansi Lumens Projector,XGA(1024 X 768) Resolution,Contrast Ratio:4000:1. Make:EPSON/Eq.

Supply and Installation of 6F x 4F Motorized screen with remote. Make:Liberty/Eq.

Supply and Installation of 3 feet ceiling mount kit. Make:jenefas/Eq.

Supply and Installation of 20m HDMI Cable. Make:Honeywell/Eq.

Supply and Installation of 3 core 1.5 Sq.mm power cable cable for projector with pvc pipe. Make:Orbit/Eq.

Supply and Installaion of 15W wall mount speaker, Built-in 70V/100V transformer, plus 8 ohm direct capability. etc. Make: Bosch/ Eq

Supply and Installation of 240W Audio Mixer amplifier. Make:Bosch/Ahuja/Eq

Supply and laying of 2 core 1.5 sq mm Speaker Cable.

Supply and Installation of dual handheld / Label wireless microphone with transmitter. Make: AKG/Shure/Eq.

Supply and Installation of Gooseneck wireless microphone System (4 Nos) with transmitter. Make:StudioMasterXR100/Eq.

Supply and Installation of 12U floor mount heavy duty audio rack with lock and key facilities. Make:Valrack/Eq.

Supply and Installation of 1 KVA Servo Voltage stabilizer withOver and under voltage correction – auto matically regulates in both conditions, Wide input voltage range for Indian conditions(140-260V), Accurate voltage control, No waveform distortion. Make :Studiomaster/Eq.

Supply and Installation of 3200 Ansi Lumens Projector,XGA(1024 X 768) Resolution,Contrast Ratio:4000:1. Make:EPSON/Eq.

Supply and Installation of 6F x 4F Motorized screen with remote. Make:Liberty/Eq.

Supply and Installation of 3 feet ceiling mount kit. Make:jenefas/Eq.

Supply and Installation of 20m HDMI Cable. Make:Honeywell/Eq.

Supply and Installation of 3 core 1.5 Sq.mm power cable cable for projector with pvc pipe. Make:Orbit/Eq.

Supply and Installation of RJ 45 & RJ 11 I/O,back boxes and face plates on wall. Make:D-Link/Eq.

Supply and Installation of 1m patch cord. Make:D-Link/Eq.

Supply and Installation of 24 port Fully managed Layer -2 switch. Make:D-Link/Eq.

Supply and Installation of 24 port Fully loaded patch panel. Make:D-Link/Eq.

Supply and installation of 6U wall rack with power manager and all accessories.

Supply and Installation of 0.6 KVA UPS. Make:APC/Eq.

Supply and Installation of cat6A cable in existing pvc pipe on wall and ceiling. Make:D-Link/Eq.

Supply and laying of 25mm dia 1 inch pvc pipe on wall and ceiling.

Supply and Installation of 2m patch cord. Make:D-Link/Eq.

Supply and Installation of EPABX system with 4 P&T line 32 extension intercom system estension upto 96 with 1 KVA UPS.Make:NEC/Eq

Supply and Installation of 50 +50 pair DB with module.Make:D-Link/Eq.

Supply and Installation of 20 pair DB with module. Make:D-Link/Eq.

Supply and Installation of 10 pair telephone cable in existing pvc pipe on wall and ceiling. Make:Finilex/Eq.

Supply and Installation of 2 pair telephone cable in existing pvc pipe on wall and ceiling. Make:Finolex/Eq.

Supply and laying of 25mm dia 1 inch pvc pipe on wall and ceiling.

Supply and Installation of caller ID telephone instrument. Make:Beetel/Eq.

Supply and Installation of 4MP IP bullet/dome camera.Make:NEOS/Eq.

Supply and Installation of 8-port poE switch, which supports IEEE802.3 af/at poE standard. Make: D-link/Eq.

Supply and installation of 32 channel Network Video recorder , band width support 2 SATA HDDs up to 8 TB . Make :NEOS / Eq.

Supply and Installation of 6TB built in Hard Disc Drive. Make: Seagate/Eq.

Supply and installation of 4U wall rack with power manager and all accessories.

Supply and Installation of 0.6 KVA UPS. Make:APC/Eq.

Supply and Installation of 43 inch LED TV for CCTV camera monitors. Make:Sony/Eq.

Supply and Installation of cat6 cable in existing pvc pipe on wall and ceiling. Make:D-Link/Eq.

Supply and laying of 25mm dia 1 inch pvc pipe on wall and ceiling.

Supply and Installation of 55 inch, 4K,Android-13, interactive touch Professional display with USb C,HDMI in & out with OPS etc. Make:Samsung/Eq.

Supply and Installation of DTH Recharge for one year.Make:D-Link/Eq.

Supply and Laying of RG6 coaxial cable for DTH connections.Make:D-Link/Eq.

Testing and Commissioning of PA system, CCTV security camera,LAN net work system,EPABX Inercom system,Tata sky Super LNB 2.0 and other accessories etc.

GST at 18%

S.K.B Constructions (BID ID -1383388)

SRI VISALAKSHI CONSTRUCTIONS (BID ID -1383300)