Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹5.7 LAdmitted-Finance | -27.23% | ₹5.7 L | L1 | Admitted-Finance |
| 2 | L2₹5.9 LAdmitted-Finance | -24.99% | ₹5.9 L | L2 | Admitted-Finance |
| 3 | L3₹6.2 LAdmitted-Finance | -21.60% | ₹6.2 L | L3 | Admitted-Finance |
| 4 | L4₹6.4 LAdmitted-Finance | -18.52% | ₹6.4 L | L4 | Admitted-Finance |
| 5 | L5₹6.6 LAdmitted-Finance | -16.73% | ₹6.6 L | L5 | Admitted-Finance |
Tender Value
₹7.9 L
EMD Value
₹3,950
Closing Date
23 Mar 2026, 2:00 pmClosed
Executive Engineer PHED Division Nimbahera
Executive Engineer PHED Division Nimbahera
Supply and Installation of 3 phase ISI marked submersible motor pump set of five star rating at different tube wells of RWSS Barisadri Distt. Chittorgarh with two year defect liability period.
2026_PHCJA_547391_1
Nit no. 128 Yr. 2025-26
Open Tender
Civil Works - Water Works
30 days
Nimbahera
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Executive Engineer PHED Division Nimbahera
₹3,950
Yes
30 Mar 2026
19 Mar 2026
23 Mar 2026
19 Mar 2026
23 Mar 2026
19 Mar 2026
19 Mar 2026 - 23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283- 2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. | ||||||
| 2 | 9.3 KW (12.5 HP) & head above 120 mtr.- 2 Nos | 1 | KW | - | - | BI01010001010000000000000515BI0100001112 |
| 3 | 7.5 KW (10 HP) & head above 120 mtr.-3 Nos | 1 | KW | - | - | BI01010001010000000000000515BI0100001113 |
| 4Providing, installation, testing and commissioning of submersible Monoblock pump set conforming to IS 8034 and 2 pole motor operating at synchronised speed of speed 3000 RPM, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz AC and with water lubricated bearing to accept entire hydraulic thrust. Supply, with cable guard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump and minimum 6 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD. | ||||||
| 55.5 KW (7.5 HP) | ||||||
| 67.5 KW (10 HP) | ||||||
| 7Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. | ||||||
| 8 | Above 5 HP and up to 10 HP | - | Each | 24,273 | - | BI01010001010000000000000515BI0100001118 |
| 9 | Above 10 HP and up to 15 HP | - | Each | 27,829 | - | BI01010001010000000000000515BI0100001119 |
| 10Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. | ||||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.79 MB
td128.pdf
Tender Documents • 2.19 MB
BOQ_976021.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid