Renovation of the Office Buildings, bathrooms, fencing and allied works of the buildings located at Mechanical and Hospitals Engineering Department Complex Shalteng Srinagar under CAPEX for the 2024-25

Amount

RENOVATION OF OFFICE BUILDING (BATHROOMS)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling G.I. pipes (Internal work) including cutting cement plaster, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge :

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Vide quantity No. 3

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand andmanufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (Paymentfor grouting of joints to be made separately). 600X600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.11.58.1 Size of tile 500x500 mm11.58.2 Size of tile 600x600 mm Vide quantity No. 7

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand plastic P or S trap, 10 liter low level white P.V.C. flushing cistern (slim), including flush pipe (of steel) with manually controlled device (push button) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing of floor traps 110 mm with double chrome plated cover one grated and one closed and all other fittings required

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing mirror of superior glass (of approved quality) and ofrequired shape and size with plastic moulded frame of approved makeand shade with 6 mm thick hard board backing 18.32.2 Rectangular shape 453x357 mm

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required 18.7.8 White Vitreous China Surgeon type wash basin size 660x460 mm

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing toilet paper holder 18.34.1 C.P. brass

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 18.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg

Providing and fixing CP Brass Single lever wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-inchargeInternal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

15mm nominal outer dia pipes.

20mm nominal outer dia pipes.

25mm nominal outer dia pipes.

32mm nominal outer dia pipes.

40mm nominal outer dia pipes.

Providing and fixing testing and commisioning PVC SWR pipes (Type B ) confirming to is 13592 along with required fittings like tees, bends, cowels, crosses with or without doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in rcc brick work and making good the floors beams, and walls cement mortar where required complete of outer diameter. waste pipe isi Prince quality

110mm nominal outer dia pipes.

150mm nominal outer dia pipes.

50mm nominal outer dia pipes.

Allied Fittings

Dismentalling existing sewer pipe line,sink area, dismentalling tile work, concrete flooring upto 1 feet wide and depth and making the good floor and wall (aproximately 100 sqft) with concreteing and tile work and including Providing and fixing testing and commisioning PVC SWR pipes (Type B ) confirming to is 13592 along with required fittings like tees, bends, cowels, crosses with or without doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in rcc brick work and making good the floors beams, and walls cement mortar where required complete of outer diameter. waste pipe isi Prince quality. the job includs providing fixing of ss sink of 600x450 along with waste sink pipe and fittings.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge

Supplying and filling in plinth with fine sand all arround the tank including, watering, ramming, consolidating and dressing complete.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channelsin cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing septic tank (poly ethylene ) having 3 chambers for 35 persons capacity ( ISI Mark) including carriage all complete job

Cleaning of mainholes and revamping by way of increasing the height by 6 inches from existing using bricks in 1:6 mortar and providing mainhole (PVC) covers and replacement of broken pvc pipes with new ones as per site requirement

Supplying ,stacking and spreading crushed aggreagtes at site 16.4.1.3 53 mm to 22.4 mm

crushed aggregates

labour

carriage

construction of 10 feet deep soakage pit by way of providing and laying reinforced cement concrete rings of dia 4 feet each along with rcc cover plate of same diameter along with providing fixing of 4 inch diapvc pipes, bends and unions all complete

RC rings

plate

RENOVATION OF OFFICE BUILDING (FENCING)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars/Bolts for sunshades/balconies etc including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement/bolts, all complete as per direction of Engineer-In-Charge.

Painting with aluminum paint of approved brand and manufacture to give an even shade, one or more coats on old work.

M/S TANVEER AHMAD JOGI (BID ID -2274121)