138WE/L-37/2020-21

Amount

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level complete all as specified and as directed.

Demolition of cement concrete in any description and any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises complete all as specified and as directed.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed.

Ditto all as per item No. 8 above but n.exc 1.0 sqm complete all as specified and as directed.

Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed.

Demolition of reinforced cement concrete in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for reinforced cement concrete,1:2:4 type B1 (20mm graded aggregate) for slab supported on wall , beams and columns in floors , roofs, landings, shelves and the like complete all as specified and as directed.

M&L form work to soffits of suspended flat sabs such as roof slabs ,floor slabs,landings and similar works (smooth finished flat surface of concrete) not exceding 200mm thick (Horrizontal or sloping) complete all as specified and as directed.

Mild steel TMT bars10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate as plinth protection finished even and smooth with out using extra cement complete all as specified and as directed.

M&Lfor Forming Contraction (Dummy) joints 75 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection complete all as specified and as directed.

M & L for 75mm thick PCC 1:4:8 type D-2 using 20mm graded aggregate as in sub base of floor complete all as specified and as directed.

M&L for PCC 1:2:4, 40 mm thick type B-1 using 20mm graded crushed stone aggregate as in floor finished even and fair with out using extra cement complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 but nexc .18 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over the screed bed with cement mortar (1:4) 15mm thick laying floor tiles complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 and nexc .11 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over the screed bed with cement mortar (1:4) 15mm thick laying floor tiles complete all as specified and as directed.

M&L for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed bed 20mm thick in cement mortar 1:6, set and jointed in neat cement slurry laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 250X 7mm/450X350X7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick cement mortar (1:4) in dado/skirting tiles complete all as specified and as directed.

S&F in repairs PUF water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tanks & removing to store complete all as specified and as directed.

S&F in repairs bib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap) complete all as specified and as directed.

S & F in repair 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repairs Angle Valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe fixed in repairs complete all as specified and as directed.

S&F in repairs swivel shower with arm of PTMT any colour for fixing witth 15mm pipe (Min wt 40 gms) complete all as specified and as directed.

S&F in repairs PVC connection pipe suitable for connecting flushing cistern and WHB etc 450mm long complete all as specified and as directed.

S&F Grating round 140mm size PTMT (Minimum weight 50 gms) complete all as specified and as directed.

S&F in repairs vitreous china Soap dish complete all as specified and as directed.

S&F in repairsTowel rail 600mm long Chromium plated (Minimum weight 190 gms) complete all as specified and as directed.

Taking down steel tubing 20mm bore of pipe and connections in any position including cleaning for refixing or removal to store complete all as specified and as directed.

3 layer PP-R Polypropylene random copolymer pipes 20mm dia SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc complete all as specified and as directed.

S&F in repairs PP-R gate valves 20 mm dia (brass insert) as per requirement of the site complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan 'Orissa' pattern,size 580x440 mm white with ntegral foot rests (excluding flushng cistern and flush pipe) complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with linlet,ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs for wash basin, vitreous china ,white , flat back, size 630X450 mm including bbrackets & including cutting for and pinning in ends of brackets or errecting stand but excusive of fixing of supply and waste pipe complete all as specified and as directed.

S&F in repairs Waste cupling for bore dia discharge pipe of PTMT (half or full threaded) minimum weight 32 -45 gms/40mm -60gms) complete all as specified and as directed.

S&F in repairs Vitreous China bowl Urinal, flat back, size of 465x355x265mm white with grating and union for discharge pipe and PTMT waste coupling with waste pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

Dismantling CI/PVC pipes of up to 100mm bore with fittings complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber joints fixed to walls complete all as specified and as directed.

PVC (SWR) 'S, trap of 125/110 mm bore complete all as specified and as directed.

S/F 110 mm dia (SWR) bend any radius complete all as specified and as directed.

M&L for PCC type C-2, (1:3:6) using 40mm graded crushed stone aggregate as in mass concrete and filling of foundation complete all as specified and as directed.

M&L for PCC type D-2(1:4:8) using 40mm graded crushed stone aggregate as mass concrete and filling of foundation complete all as specified and as directed.

M&L for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate complete all as specified and as directed.

M&L for 15mm thick rendering using water proofing compound @ 3% of cement on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed.

M&L for 10mm thick rendering on ceiling finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed.

Supply only Intergral water proofing compound complete all as specified and as directed.

Applying a thin film of cement slurry 2mm thick mixing with water proofing compound as per manufacturers instruction on floor surface complete all as specified and as directed.

Anodised aluminium frame of standard section for doors, windows, ventilators , Partitions etc with double rebates including joining cleat for fixing etc complete all as specified and as directed.

M&L for anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

M&L sheet glass 5.5mm thick ordinalry quality and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed.

S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete all as specified and as directed.

M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed.

S&F for 35mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats complete all as specified and as directed.

M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

M&L figured glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F in repairs mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed.

M&L for preperation of new plastered wall surface of any description and applying three coats of white wash complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applayng one coat of white wash complete all as specified and as directed.

M&L for preperation of old plastered ceiling surface of any description and applayng one coat of white wash complete all as specified and as directed.

M&L for preperation of new or previously unreated wooden surface any description over 10cm in width or girth and applaying two coats of synthetic enamal paint over a coat of Pink primer complete all as specified and as directed.

M&L for preperation of old wooden surface surface any description over 10cm in width or girth and applaying one coat of synthetic enamal paint complete all as specified and as directed.

M&L for preperation of new concrete /plastered surface of any description and applaying two coat of exterior emulsion paint over a coat of primer complete all as specified and as directed complete all as specified and as directed.

M&L for preperation of new concrete /plastered surface of any description,applaying two coats of destemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for preperation of new concrete /plastered surface of any description,applying 3mm thick wall care putty and two coat of destemper oil emulsion over a coat of primer complete all as specified and as directed.

Dismanting wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover filters complete all as specified and as directed.

M&L for 9mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

M&L for fixing only 9mm thick pre-laminated particle board complete all as specified and as directed.

M&L french polishing one or more coats on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old work complete all as specified and as directed.

Dismanting of unframed fillets, rails, posts, rafters, purlins etc. Under 40 Sqcm in section complete all as specified and as directed.

M&L for plain fillets, square rectangular or triangular in section clean swan, secured with nails or beads of section area exc 13 & nexc 25 sq cm in 2nd class soft wood complete all as specified and as directed.

M&L for covered fillets of standard hard board 3mm thick and 40mm wide and fixing with screws complete all as specified and as directed.

Dismantling roof tiles or roof treatment of any description including cement mortar, bedding (But not backing ) and rubbish of premises complete all as specified and as directed.

Roughening surface of old concrete floor by piking ,sweepng clean and washing down with water to remove dust etc complete all as specified and as directed.

Cutting out cracks to V section in existing roofs or terracing ,cleaning out ,wetting, grouting with cement and sand slurry in 1:3 complete all as specified and as directed.

M&Lfor brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and as directed.

M&L PCC 1:2:4, 25 mm thick type B0 using 12.5mm graded stone aggregate as in floor finished even and fair with out using extra cement complete all as specified and as directed.

M&L for 20 mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed.

M&L for priming surfaces and applying heavy treatment (for severe conditions), using glass fibre base bitumen felt, grade 2 complete all as specified and as directed.

M&L App based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surfaced application including removing old dameged existing roof treatment, complete all as specified and as directed.

Taking down carefully aluminium / copper point wiring light/fan/socket or power complete including unscrewing from board fitting and fixture such as switches, sockets, ceiling roses, lamp holders, brackets, pendent holder , light fittings , regulators, distribution/ Meter boards, MCBs etc and making good the distturbed surface matching with existing specifications complete all as specified and directed.

Point wiring for one light point or fan point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts fire resistance ISI, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 1.50 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.

Description all as per serial item No- 96.00 here-in-before but for 5 Amps socket outlet on same board, complete all as specified and as directed.

Description all as per serial item No- 96.00 here-in-before but for 5 Amps socket outlet on independent board, complete all as specified and as directed.

Point wiring for 3-pin, 15 Amps, socket outlet on independent board with 2.5 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 1.5 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.

Switch socket combination 2-in-1, 3-pin, 5/ 15 Amps, flush type universal, complete all as specified and as directed by Engineer-In-Charge.

Switch piano, flush type, single pole, one way, 5 Amps 240 Volts, complete all as specified and as directed by Engineer-In-Charge.

Switch socket combination 3 pin & 2 pin 5 Amp flush type, complete all as specified and as directed by Engineer-In-Charge.

Switch socket outlet 3 pin & 2 pin 5 Amps flush type complete all as specified and as directed by Engineer-In-Charge.

Ceiling rose, surface bakelite 65 x 50 mm two or three terminals complete all as specified and directed.

S&F wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipiation and integrated electronic drive LED light fitting 1 x 22, 6000K Watt 230 volts, 50 HZ AC box type 4 feet complete with 1 x 22 W tube rod with all acessories internally prewired and connecting up with twin core twisted flexible copper condutor of suitable size complete all as specified and as directed. Make Havells Cat Part No. LHEWEBP7PL1W022 or equivalent of Bajaj / Phillips.

S&F Sheet metal enclousers TPN for DBs with 200 Amps bus bar of 4 way 415 volts with IP 43-Glazed double door complete all as specified and as directed. Make : Legrand or equivalent in L&T.

S&F Sheet metal enclousers SPN for DBs with 200 Amps bus bar of 12 way 240 volts with IP 43-Glazed double door complete all as specified and as directed. Make : Legrand or equivalent in L&T.

S&F MCB Single Phase and Neutral 6-32 Amps, 240 Volts complete all as specified and as directed. Make : Legrand/ L&T.

S&F MCB Single Phase and Neutral 63 Amps, 240 Volts complete all as specified and as directed. Make : Legrand/ L&T.

S&F MCB Three Phase and Neutral (TPN) 63 Amps, 415 Volts complete all as specified and as directed. Make : Legrand/ L&T.

Sub main wiring for circuit/ submain wiring alongwith earth wire with two run of 6.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi stranded, FRLS, ISI marked, 1100 Volts grade and one run of 4.0 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed on surfaces of walls/ ceilings in repairs, including making good to disturbed surface matching to existing descriptions/ specifications, complete all as specified and as directed

Supply, fixing, connecting and testing building security light LED type, 8 Watt suitable for working on 230 Volts, 50 Hz, AC of 48 Watts complete all as specified and as directed

GI Bracket made out of 50 mm dia medium grade pipe 1.2 m length to shape for fixing on wall and suitable for 48 watt street light with 02 clamps of flat iron (40x4mm ) nuts, bolts other acrssories complete all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with multi-standard aluminium conductor, 1100 volts grade, cross sectional area 25 Sqmm 4.0 core, laid in trenches or passing through pipes, including making necessary connections at both ends, complete all as specified and directed.

Excavation in trenches n. exc 1.5m wide and n. exc 1.5 m deep for cables, poles, etc and getting out in hard/dense soil complete all as specified and as directed .

Returning filling in including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and as directed .

Removing excavated soil to a distance n exc 50m and depositing at a level n exc 1.5m above the starting point complete all as specified and as directed .

Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and as directed. Note: Punned thickness shall be measured.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type-I, flat, size 250mmx150mmx40mm, complete all as specified and as directed.

Supply and Laying Tubes light grade 50 mm dia for electric cable protection complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with galvanized iron wire 4.0mm dia as earth lead means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15 mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1(using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed. Note: The cost of excavation and earth work, PCC pit and pit covers, funnel and watering pipe, wire mesh, charcoal dust and common salt, 15mm dia, medium grade, GI pipe as protection to earth lead and earth lead as 4.0mm dia GI wire (main earthing lead from earth electrode to test point length not less than 7.5mtrs) shall be deemed included in the unit rate for earthing.

R B TRADERS

M.S Sharma Enterprises

SHARMA AND SONS CONSTRUCTION CO

Rampal Singh Contractor

ASHOK KUMAR SHARMA

Mehar Enterprises

SUMEET TRADING CORPORATION

HILL AND CO.

VIJAY ENTERPRISES