WELCOME MAINTENANCE AND MISC WORKS SUCH AS JOINERY,PLUMBING,SANITARY FITTING,FLOORING,SUNKEN TREATMENT,ROOF TREATMENT ETC IN OMQ AT SECTOR 31 B and C AT AF STATION CHANDIGARH

Amount

Preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash, complete all as specified and directed.

Preparation of old surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash, complete all as specified and directed by Engineer –in-Charge.

Preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and directed by the Engineer-in-Charge.

Complete removal of existing treatment from internal surfaces on walls by wire brushes & stopping of surfaces & leveling/ edging the disturbed places/edges using necessary filling compound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying two coats of oil bound distemper over a coat of alkali-resistant primer, complete all as specified and directed by the Engineer-in-Charge.

Prepartation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Prepartation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified

Material and labour preparation of new plastered surfaces and apply two coat of oil bound distmper over a coat of primer & chalk whitening & smoothening of surface, complete all as specified and directed.

Three coats of white wash including preparation of newly plastered or un plastered ceiling surfaces of any description complete all as specified.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

S & F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, 110mm single socketed

75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall in repairs, complete all as specified.

110 mm bore PVC (SWR) bends any radius, fixed in repairs, complete all as specified.

75 mm bore PVC (SWR) bends any radius, fixed in repairs, complete all as specified.

S&F in repairs 75mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel brances with oval access doors

S&F in repairs 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel brances with oval access doors

M&L for PVC floor trap, 75 mm dia of out let, ISI marked, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs, complete all as specified.

Demolition of lime concrete/ lean concrete/ brick bats from sunken portion exc. 15 cm thickness (above ground level), including removal of rubbish outside MoD land, complete all as specified.

Water proofing treatment to sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make as approved in Technical Instruction 5/ 2003:- (a) 15 mm thick plaster (1:4) in cement sand mortar with integral water proofing compound 2 % by weight of cement on floor and wall, finishing the surfaces even and smooth without using extra cement. The surface shall then be cured and allowed to dry. (Note: Supply only water proofing compound shall be measured and paid separately). (b) First layer of slurry of cement @ 0.488 Kg/Sq.m mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sq.m. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @ 0.242 Kg/Sq.m mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.

PCC (1:2:4), type B-1, using 20 mm graded mechanically crushed stone aggregates, using integral water proofing compound @ 3% by weight of cement, as in padding concrete to sunken floor, covering to junction of floor and vertical walls including chamfering on edges, complete all as specified and directed by Engineer - in -Charge. Note: Supply only water proofing compound shall be measured and paid separately

Supply only integral water proofing compound, complete all as specified.

S&F Steel water tubes, 40 mm bore, medium grade, galvanized, as in spout for sunken floor, fixed in wall, inside end fixed with wire netting and external beveled edge at 45 degree, complete all as specified and directed by Engineer - in -Charge.

Lean concrete (1:5:10), type E-2, using 40 mm brick coarse aggregate, as in sunken portion, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified.

Demolition stone slabs and tiles of any description or thickness in floors/ dado, aprons etc., laid bedded and pointed in any mortar, complete all as specified.

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified.

Demolition of brick masonry in any position built in any cement mortar, complete all as specified.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:4), using old size bricks, complete all as specified.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:4), using old size bricks, complete all as specified.All as per item No.93 above but except bricks. Note:- Serviceable bricks retrieved from Serial item No. 1.04 here-in-before shall be used after proper washing.

Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and fair without using extra cement, complete all as specified.

Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified.

M & L rendering 10 mm thick on ceiling in CM(1:3) finished even and smooth without using extra cement

Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed by Engineer - in -Charge. Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required up to 3.50 Mtr height building.

Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed by Engineer - in -Charge. Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required exceeding 3.5 Mtr but n.exc 7.00 Mtr height building.

25 mm thick, PCC (1:2:4), type B-0 (12.5mm graded crushed stone aggregate) as in flooring finished even & rough to receive the bedding mortar, complete all as specified.

First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified.

First quality, glazed ceramic coloured tiles, 6-7 mm thick of size 300x450 mm, fixed in pattern to wall (combination of dark & light colour) as in skirting, dado with set and jointed in neat cement slurry, over and including 10 mm thick rendering of cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified.

Vitrified superior tiles, 10 mm thick (square/ rectangular) area of each tiles exceeding 0.36 Sq.m, but n.exc 0.42 Sqm laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified. (Make : Vitro of Somany or equivalent in Asian/Johnson/Kajaria)

Vitrified superior tiles, 10 mm thick (square/ rectangular) area of each tile exceeding 0.36 Sq.m, but .exc 0.42 Sqm as in skirting, set and jointed in neat cement slurry, over and including 10 mm thick rendering of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified. (Make : Vitro of Somany or equivalent in Asian/Johnson/Kajaria)

M&L 75mm thick plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in floors/hard standing, etc, laid in approved size panels, finished even and smooth without using extra cement, joints filled with mastic mortar, complete all as specified and directed.

Material and labour, PCC (1:2:4), 40mm thick, type B-1 using 20mm graded mechanically crushed stone aggregates, as in flooring, finished even & smooth using extra cement @1.2Kg/Sqm, laid in panels, complete all as specified and directed. Note: Glass dividing strips shall be measured and paid separately for panelling.

Supply and fix in position, Glass dividing strips, 3 mm thick and 38mm wide, as in floors, complete all as specified and directed.

Granite (of any type ) 16-18 mm thick, work (table rubbed and polished) fine grained 'Z' black/red in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed of 15 mm thick in CM 1:4, complete all as specified.

Taking down ventilators any type and description.

Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified

Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified

Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified

Supply and fix, factory made pressed steel frames for doors with one or more rebates, of size 105mmx60mm, made out of 1.25mm thick sheet, including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

Supply and fix, factory made pressed steel frames for doors with two rebates, of size 125mmx60mm, made out of 1.25mm thick sheet, including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

Supply and fix, flush shutters 35mm thick,solid core construction with particle board core and plywood face panels commercial type on both sides, duly provided with 6mm thick Teakwood leeping on edges alround, fitted to chowkats, complete all as specified & directed.

Factory made shutter, 35 mm thick, 2nd class hardwood (Hollock) rail and style, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply. The size of rail and stile as per IS: 1003 (Part-I) and as specified in SSR Part-I section 8 clause 8.24(a), kiln seasoned and chemically pressure treated, complete all as specified.

35 mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified.

S & F Factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of 5 mm thick plain colour PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided throughout the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical member & minimum 02 Nos. for horizontal member), complete all as specified.

S & F Factory made moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face & 2 mm prelam PVC sheet on back face, complete all as per manufacturer instructions complete all as specified.

Stainless steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100 mm, ISI marked, complete all as specified.

Supply and fixing, 150mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

Supply and fixing, 200mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

Supply and fix 150mm size aluminum handle, 'D' type, anodized, ISI marked, complete all as specified and directed.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, ISI marked, complete.

Spring for doors 300 mm mild steel ordinary rat tail rod pattern spring including roller & roller plate, complete all as specified.

Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-184-2012 Sheets 1/3 & 3/3.

Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars, including flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2.

M&L for factory made box type steel ventilator fixed type, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-186-2012 Sheets 1/1.

M&L for factory made box type steel ventilator with glazed shutter or gauzed shutter with glazing bars or flat iron 12 x 3mm dovetailed or welded for fixing wire mesh/glass and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-186-2012 Sheets 1/1.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290 Gde-E-165, complete all as specified.

Supply and fixing, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.

Fix in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed by Engineer-in-charge.

S & F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. Note:- New wooden required for glazing glass in wooden window will be paid for separately.

S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.

S & F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area not exc 3 sqcm, clean sawn, wrought finished secured with screws complete all as directed.

Supply and fixing, drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.

18 mm/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Supply & fix, block board 18mm / 19mm thick, grade 2 quality, interior grade, commercial type, decorative with one side teak face fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, fixed in repairs, complete all as specified and directed.

S & F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 13 & n exc 25 sqcm, clean sawn, wrought finished secured with screws complete all as directed.

Continuous (piano) hinges, stainless steel, bright finish or electro galvanised, 30 mm wide flap (when open), fixed in repairs, complete all as specified.

100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, fixed in repairs, complete all as specified.

S&F 100mm size aluminum handle, 'D' type anodized complete all as specified and as directed.

Supply and fix, 40mm dia, cupboard knobs fixed with nut, washers / screws etc., of brass polished, bright finished, complete all as specified and diercted.

S & F Magnet catcher suitable for kitchen cabinet/coupboard with steel plate and stainless steel as required complete all as specified and as directed.

Taking down wooden shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm from steel frame/wooden frame and refixing after easing and adjusting and refixing builders harware in the same opening complete all as directed by Engineer-in-Charge.

Cutting holes in brick walls exceeding half brick but not exceeding one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4, including removal of rubbish outside MoD land, complete all as specified.

Cutting opening through brick wall built in cement mortar for window type AC of standard size, forming jambs etc. to opening, making good under cills or over lintels, 2nd class hard wood, plain, fillets, square or rectangular in section, clean swan, sectional area exceeding 13 Sq.cm but not exceeding 25 Sq.cm, including painting & distempering to match existing and removing rubbish out side MoD land, complete all as specified and directed by Engineer-in-Charge.

Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe) including connected to drains outlet, fixed in repairs, complete all as specified and directed by Engineer - in -Charge.

S&F in repairs vitreous china squating pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.

Plastic water closet seat white quality pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, fixed in repairs, complete all as specified and directed by Engineer - in -Charge.

Hand shower (Health foucet) cast copper alloy chromium plated with and including 8mm dia 1.00 meter long PVC flexible tube and with hook complete all as specified and directed. (Make : ESS ESS or equivalent)

Supply and fix, Mild steel Chromium plated jet including PVC pipe of suitable length for European/ pedestal type WC including all accessories, Fixed in repairs, complete all as specified and directed.

S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.

Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site, complete all as specified.

Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site, complete all as specified.

S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.

Steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified.

Cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified.

Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified.

Dismantling PVC water storage tank of capacity exceeding 250 litre but not exceeding 500 litre and stacking for issuing under credit, complete all as specified.

Rotational moulded PVC, double layered, white colour water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve, complete all as specified.

Ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore, fixed in repairs, complete all as specified.

PVC lid with clips, screws, locking device complete, suitable for 500 litre capacity PVC water storage tanks, cylindrical closed top, fixed in repairs, complete all as specified.

Stop valve of PTMT, 15 mm bore, any colour high pressure screwed for iron pipe (Minimum weight 90 gms), fixed in repairs, complete all as specified.

Stop valve of PTMT, 20 mm bore, any colour high pressure screwed for iron pipe (Minimum weight 92 gms), fixed in repairs, complete all as specified.

S&F in repairs Wash basins, vitreous china, white, rectangular type of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets complete all as specified and directed.

S & F in repairs stainless steel sinks with drainage board made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, fixed in repairs, complete all as specified.

Wall mixer with L bend (provision for over head shower), cast copper alloy, chromium plated for mixing hot and cold water, screwed down for 15mm bore iron pipe, fixed in repair complete all as specified and directed. Make: Cat No. 8675 of PRAYAG or equivalent in ESS ESS, MARC, HINDWARE.

PVC flexible pipe suitable for WHB/ Sink, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Rectangular glass shelf 500 x 125mm, including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed. Make: Cat No. BEA-45 of PRAYAG or equivalent in ESS ESS, MARC, HINDWARE

Corner glass shelf of radius 300 mm including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed. Make: Cat No. BEA-44 of PRAYAG or equivalent in ESS ESS, MARC, HINDWARE

S&F soap dish brass, chromium plated fancy type fixed to plugs with chromium plated brass screws.

S & f in repairs bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified.

S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified. (Make : ESS ESS or equivalent)

Bib cock long body with flange, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed in repairs, complete all as specified. Make: Cat No. 8608 of PRAYAG or equivalent in ESS ESS, MARC, HINDWARE.

Pillar cock long neck, cast copper alloy, chromium plated fancy type , with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe and fixed in repairs, complete all as specified. Make: Cat No. 8604 of PRAYAG or equivalent in ESS ESS, MARC, HINDWARE.

Angle cock with flange, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed in repairs, complete all as specified. Make: Cat No. 8608 of PRAYAG or equivalent in ESS ESS, MARC, HINDWARE.

Concealed stop cock regular body with flange, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed for 15mm bore iron pipe or for unions fixed in repairs, complete all as specified. Make: Cat No. 8618 of PRAYAG or equivalent in ESS ESS, MARC, HINDWARE.

Towel rail 600 mm long, 20 mm dia, ‘D’ type, brass chromium plated, fixed to walls with screws and plastic cleats, fixed in repairs, complete all as specified.

S&F in repairs grating doom 125mm dia with waste hole of PTMT (Minimum weight 25gms) complete all as specified and directed.

Note:- Amount of credit of Rs. 32490.00 for retrieved materials is mentioned in Schedule of Credit Page No 112 & 113 of tender documents in pdf form which will be deducted offline while acceptance of tender.

MOHAMMAD RASHID

M/S NAVEEN PATHANIA