Providing and laying PVC Pipe and Kota Stone from Conference Hall to Manhole near parking at Himachal Bhawan Chandigarh.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and Medium Tensile steel bars Thermo-Mechanically Treated bars of grade Fe-500D or more Tata/Sail/Jindal Panther /JSPL / Shyam steel as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing Granite work edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge including carriage of materials within all leads, lifts and heights.

Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (Kitply/Century/Merino) as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 50x12 mm 2nd class teak wood wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 200x10 mm bright finished brass tower bolts (barrel type) (heavy duty of approved make) with necessary screws etc. complete as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 125 mm bright finished brass handles (heavy duty of approved make) with screws etc. complete as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of materials within all leads, lifts and heights.

15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking the useful material in specified manners as per the direction of Engineer-In-Charge and disposal of unserviceable materials in all leads and lifts. For thickness of tiles 10mm to 25 mm

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 80mm PVC pipe Finolex/Supreme/Vectus ventilating pipes jointed with standard quality adhesive as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 110mm PVC pipe Finolex/Supreme/Vectus ventilating pipes jointed with standard quality adhesive as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing 80mm dia Plain Bend PVC Finolex/Supreme/Vectus fittings and accessories of standard/approved quality as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing 110mm dia Plain Bend PVC Finolex/Supreme/Vectus fittings and accessories of standard/approved quality as per the direction of Engineer in Charge including carriage of materials within all leads, lifts and heights.