Continued wok of garadimane of ward no 5 at CMC nanjangud limit (Reserved for Cat 2A)

Continued wok of garadimane of ward no 5 at CMC nanjangud limit

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant...

Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1 is to 6 1 cement is to 6 coarse sand

Filling available excavated earth excluding rock in trenches plinth sides of foundations and other similar works etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming...

Ready Mix Concrete RMC with Cement and Cementitious Materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all...

Ready Mix Concrete RMC with Cement and Cementitious Materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all...

Ready Mix Concrete RMC with Cement and Cementitious Materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all...

Ready Mix Concrete RMC with Cement and Cementitious Materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all...

Steel Fabrication Supplying fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping or welding...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg per cum and minimum compressive strength of 4.00 N per sqmm conformi...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg per cum and minimum compressive strength of 4.00 N per sqmm conformi...

Providing Flush or Ruled pointing Pointing on stone work with cement mortar 1 is to 3 1 cement is to 3 fine sand after raking joints to depth nicely lining including cost of materials labour curin...

Providing 12 mm cement plaster with cement mortar 1 is to 4 1 cement is to 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffo...

Providing and fixing corrugated G.S. sheet roofing including vertical or curved surface fixed with polymer coated J or L hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with...

Providing and fixing M S grills of required pattern in frames of windows etc with M S flats square or round bars etc including priming coat with approved steel primer all complete Fixed to openings ...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work two coats over and including water thinnable priming coat with cement primer aft...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade Two coat applied at 0.90 L per 10 sqm over an under coat of primer applied at 0.80 L per 10 sqm of approved brand a...

Providing and laying red oxide flooring 40 mm thick with an under layer of 30mm thick M 15 cement concrete and top layer of 10mm thick plaster with 1 is to 3 cement mortar mixed with red oxide finishe...