87663 SPECIAL REPAIRS TO RAQAS (ARK) BUILDING NO.P-106 UNDER GE (M) NAS ARAKKONAM

Amount

Demolition of reinforced cement concrete in roof, floor columns, beams, landing, water tank and similar suspended work complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed..

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter of any description from the frame exc 1.50 sqm but not exc 4 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter of any description from the frame n exc 1.50 sqm each complete all as specified and directed.

Dismantling of PVC water tanks of capacity of exc 500 ltrs and n exc 1000 ltrs complete all as specified and directed.

Providing and applying polyurethane waterproofing membrane coating system comprising the following. a) Removal of existing bituminous membrane and mechanical cleaning of the surface and treating in sound clean and free from any bituminous residue, dirt, oil, grease, etc., All surface cracks etc., filled with Bostik Flow fill Grout, all surface patchwork, defects, etc., to be repaired with high early strength, fast setting repair mortar using Bostik Patch fix concrete and the junction of slab and wall be rounded as triangular fillet with polymer modified mortar using Bostik Boscocem 475 @ 1ltr per bag of cement, all complete as per the manufacturer's specification. b) Providing and applying Bostik ultra seal PU Primer at 200ml per sqm and then applying two coats of single component, moisture cure highly elastomeric and tough polyurethane waterproofing membrane of Bostik ultra seal PU at 1.2Kg per Sqm in two coats to achieve dry film thickness of 1mm., all complete as per manufacturers specification. Notes: (i) The above description of work is framed as per the products of M/s Bostik . The same shall be carried out using the products of Fosroc/Asian paints/Berger/Sika/Pidilite as approved by GE and as per their technical data sheet and instructions. (ii) The work shall be carried out under the supervision of the manufacturer only.

Material and labour for cement concrete B-0 1:2:4 (12.5mm graded aggregate) of 50mm thick admixed with Bostik LW @200ml per bag of cement, maintaining average slope of 1:100 towards drain water outlet complete all as specified and directed.

Supply only Integral water proofing compound all as specified and as directed by the Engineer-in-Charge.

Material and labour Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour Non-skid ceramic colour tiles 7 to 8 mm thick, (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

Material and labour Non-skid ceramic colour tiles 7 to 8 mm thick, (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

Supply and fixing of Glazed ceramic coloured tiles in vertical surface 350x250mmx7mm/450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed.

Material and labour for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished fair and even complete all as specified and directed.

Material and labour for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall complete all as specified and directed.

Material and labour Marble of any shade other than white and black, 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window, sills, cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Material and labour for Granite (of any type) 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

Material and labour for Glass mosaic tiles of 4 to 6mm thick (square / rectangular), area of each tiles exc 0.004 Sqm and n.exc 0.01 Sqm, in floors/walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick bedding layer/backing course in cement mortar 1:4 mixed with water proofing compound complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately

Material and labour 18 to 20mm thick Granite (of any type) work in black shade (table rubbed and polished) for wall lining (veneering to wall) including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 10 mm thick backing course in cement sand mortar 1:3 complete all as specified and as directed. complete all as specified and directed.

Supply and fixing Stainless steel polished letters (ROMAN,ITALIC,ARIAL or equivalent) of grade of 304 and 2mm thick of height exc 15Cm and n.exc 20CM fixing with brass screw on marble/granite stone wall surface or equivalent, complete all as directed by Engr-in-Charge.

Supply & fixing Stainless steel polished logo (as per sample available in GE Office) of grade 304 and area n.exc 0.36Sqm fixing with brass screw, complete all as directed by Engr-in-Charge.

Supply and fixing factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified.

Supply and fixing 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

Supply and fixing plain, framed, panelled factory made door shutters of 2nd class HW 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Supply and fixing 4 mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares exc.0.50 sqm in each pane complete all as specified and directed.

Supply and fixing 5 mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares exc.0.50 Square metre in each pane complete all as specified and directed.

S & F Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers

Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

Supply and fixing of 12 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame work complete all as directed.

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fixing Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodized aluminium snap beading screws inclusive of door stopper and mortice lock with duplicate keys complete all as specified and as directed.

Supply and fix powder coated anodised aluminium window and ventilator shutters Sliding / fixed type without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodisedaluminium snap beading, screws including necessary locking arrangement complete all as specified and directed.

Supply and fixing for powder coated anodized aluminium grill with a thickness of 5 to 8mm and a size of opening 10 cms with aluminium channel ‘F’/‘H’ frame of size 20mm x 15mm complete all as specified and as directed.

Supply and fixing for Venetion blind (vertical blind) of fibre strips 100mm wide of superior quality fixed to powder coated aluminium channel with sliding arrangements, pulling arrangements aluminium bracket (rotation of 180 degree louvers made of approved fabric/ colour scotch guard) fixed to wall all as per manufacturer specification complete all as specified.

Supply and fixing for Door closer aluminium (extruded section body) hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.

Supply and fixing 100mm size butt hinges of stainless steel of 304 Grade medium weight complete all as specified and directed.

Supply and fixing 100mm size stainless steel handle of 304 Grade medium weight complete all as specified and directed.

Supply and fixing 125mm size stainless steel tower bolt of 304 Grade medium weight complete all as specified and directed.

Supply and fixing 150mm size stainless steel handle of 304 Grade medium weight complete all as specified and directed.

Supply and fixing 150mm size stainless steel tower bolt of 304 Grade medium weight complete all as specified and directed.

Supply and fixing 250mm size stainless steel sliding door bolt of 304 Grade medium weight complete all as specified and directed.

Supply and fixing for 1000 capacity in litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) light in colour, triple layer ISI marked hoisted and fixed in position including dismantling old existing complete all as specified and directed. Make: Sintex-CCTS-0100-01 or equivalent as mentioned in PS

Supply and fixing 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors including taking down old unserviceable pipes complete all as specified and directed.

Supply and fixing 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors including taking down old unserviceable pipes complete all as specified and directed.

Supply and fixing 25 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors including taking down old unserviceable pipes complete all as specified and directed.

Supply and fixing in repair PVC mirror cabinet of size 330 x 430, fixed to wall as directed by Engineer-in -charge. (Make: Prayag, Cat No 551 or Equivalent)

Supply and fixing in repairs vitreous china (white) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts(except flushing cistern and flush pipe) incl seat cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge. (Make : Parry ware model No C-0279/ 0297) or equivalent as mentioned in PS

Supply and fixing in repair various china white pedestal pattern wash hand basin of size 550mm x 400mm incl providing 32mm dia CP wasted coupling, CP bottle trap bracket and making all necessary connections, fixed as directed by Engr-in-Charge. (Make : Parry ware model No C-0406 Popular range or equivalent as mentioned in PS

Supply and fixing in repair of stainless steel sink with one side draining board made out of 1.00mm thick sheet for kitchen with plug washers, waste pipe, CI cantilever brackets, connection union overall size 940mm x 460mm with blow i.e. 405x354x203mm incl making good damaged surfaces with cement mortar (1:3) to match with the existing and complete all as directed by Engineer-in-Charge. (Make: Prayag, Cat No 1244DM or as mentioned in PS)

Supply and fixing in repair 1mm thick stainless steel kitchen plate rack of size 780x750mm and fixing in position as directed by Engineer-in-Charge. (Make: Prayag, Cat No P346 or as mentioned in PS

Supply and fixing in repair Vitreous China Laboratory sink of size 600x450x200mm and fixing in position as directed by Engineer-in-Charge.

Supply and fixing in repair chromium plated bib cock long body 15mm size with wall flange, as directed by the Engr-in-Charge.

Supply and fixing in repair chromium plated stop cock 15mm size without wall flange, as directed by the Engr-in-Charge.

Supply and fixing in repair chromium angle cock 15mm size without wall flange, as directed by the Engr-in-Charge.

Supply and fixing in repair chromium plated pillar cock 15mm size without wall flange, as directed by the Engr-in-Charge.

Supply and fixing in repair chromium plated towel ring as directed by the Engr-in-Charge.

Supply and fixing and in repair chromium plated toilet paper holder as directed by the Engr-in-Charge.

Supply and fixing in repair Chromium Plated health faucet as directed by Engr-in-Charge. (Make: Prayag, Cat No BEA-40S or Equivalent as mentioned in PS

Supply and fixing of Soap Dispenser Chromium plated complete all as specified and directed.

Supply and fixing of Grating made of CP, Round shaped doom type 110mm dia complete all as specified and directed.

Supply and fixing in repairs.PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge

Supply and fixing in repair PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.

Supply and fixing in repairs PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and directed.

Supply and fixing in repair PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.

Supply and fixing in repair PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

Dismantling structural steel work including doors, grills, gates but excluding framed truss etc.complete all as specified and directed.

Supply and fixing framed work as in doors or gates of Fe-410 Gde E-250 of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with guiding rollers and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering) and hanging; also fastening and fixing complete all as specified and directed.

Supply and fixing framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and fixing in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing of CP Push cock, flush pipe and Union for discharge pipe including waste pipe and connection pipe complete all as specified and directed.

Supply and fixing for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Material and labour for Cement concrete 1:2:4 using 20mm aggregate in surface channels and drains complete all as specified and directed.

Material and labour for TMT bars 10 mm dia and over cut to length bent to shape etc as required and binding with and including MS wire (annealed) not les than 0.9 mm dia as in reinforcement complete all as specified and as directed.

Material and labour for Precast cement concrete in Cover slab type B1 1:2:4 using 20 mm graded aggregate n.exc 150 mm thick) set in CM 1:3 for man holes, chullah hoods,chajjas,water troughs, mangers, shelves and similar articles with Plain Faces complete all as specified and as directed by engineer-In- Charge

Material and labour for RCC types A1 1:1.5:3 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for Formwork to soffits of suspended slabs rough finished concrete flat surface such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Supply and fixing Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

Supply and fixing Hangers 6mm dia G.I (Upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60 mm long complete all as per specified.

Material and labour for 12 mm thick Gypsum board in ceiling fixed with screw to frame work complete all as specified and directed.

Material and labour for applying two coats of plastic emulsion paint over one coat of primer including preparation of surfaces for ceiling surfaces of false ceiling complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site complete all as specified and directed.

Material and labour for rendering 15mm thick plaster in CM 1:4 in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Material and labour for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed.

Material and labour for 5mm thick plaster in cm (1:3) on fair faces of concrete surfaces of ceiling including finishing even & smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new wall surfaces by vacuum based sanding machine and applying two coats of weather proof paint (Exterior grade) over a coat of alkali resistant primer using mechanical tool/auto roller for upto 10m height all as specified and directed” Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from GE.Contractor should submit Auth applicator certificate before execution of work.

Material and labour for preparation of new wall surface by vaccum based sanding machine and applying two coat of oil bond distemper emulsion over one coat of primer using mechanical tool / auto roller all as specified and directed by Engr-in-Charge”. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from GE. Contractor should submit Auth applicator certificate before execution of work.

Material and labour for applying three coat of white wash including preparation of new surface on ceiling complete all as specified and directed by Engr-in-Charge.

Material and labour for complete removal of existing treatment from walls, preparing the surfaces byvaccum based sanding machine and applying two coats of weather proof paint (Exterior grade) over a coat of alkali resistant primer using mechanical tool / auto roller for upto 10m height all as specified and directed” Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from GE. Contractor should submit Auth applicator certificate before execution of work.

Material and labour for preparation of old decorated plastered wall surface applying two coats of oil bound distemper on wall using mechanical tool/auto roller complete all as specified and directed. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from GE. Contractor should submit Auth applicator certificate before execution of work.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint complete all as specified and directed.

M& L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Material and labour for applying two coats of white wash on old ceiling including preparation of surface complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. for taking credit ( credit for above items should be made as per condition separately) and making good disturbed surfaces of wall, floors, etc.

Material and labour point wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor drawn into existing PVC concealed conduit and provision of 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel terminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following.

(a) One light point controlled by one switch.

(b) One Ceiling fan point controlled by one switch and one regulator.

(c) One Exhaust fan point controlled by one switch .

(d) One 3 pin socket outlet 5 Amps on independent board

All as per item ser No-2 above here in before but one 3 pin socket outlet 5/15 Amps, independent board with cables 4.0 Sqmm size.

Material and labour point wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor drawn into including PVC concealed conduit of size not less than 25 mm dia and provision of 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel terminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following Note:- : Cutting chases for concealed wiring shall be measured and paid seperately.

(a) One light point controlled by one switch.

(b) One Exhaust fan point controlled by one switch.

(c) One 3 pin socket outlet 5 Amps on the same board along with other switches.

(d) One 3 pin socket outlet 5 Amps on independent board.

All as per item ser No-3 above here in before but one 3 pin socket outlet 5/15 Amps, independent board with cables 4.0 Sqmm size.

Material and labour for point wiring with two single core 1.5 Sqmm (Nominal cross sectional area) size multi stranded copper conductor cable using colour code as phase red and neutral as black and one single core 1.5 sqmm (nominal area) copper conductor connected to common earth duly 1100 volts grade FRLS insulated unsheathed cable in and including stove enamelled steel rigid conduit/steel flexible conduit as required of not less then 20mm dia including tee bends, elbows etc., for one flame proof concealed conduit wiring light point controlled by one flame proof switch complete all as specified and as directed by Engr-in-charge.

One light point controlled by one switch.

One fan/exhaust fan point controlled by one switch.

Material and labour for cutting chases on brickwork concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carrying out the concealed wiring including necessary finishes all as directed by Engr in charge.

Supply and fixing for switch piano, flush type single pole , one way 5 amp complete all as specified and directed by Engr-in-charge.

Supply and fixing for ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and directed by Engr-in-charge.

Supply and fixing for Switch socket outlet 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed by Engr-in-charge.

Supply and fixing for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed by Engr-in-charge.

Supply and fixing for stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed by Engr-in-charge.

Material and labour for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded FRLS PVC insulted copper conductor single core cable along with earth wire , in and including surface/concealed /PVC conduit of appropriate size, including taking down old/existing complete all as specified for the following sizes. Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately. 2. Three runs of cable and one run of conduit/casing capping will be measured as one unit length.

2x 4 sqmm + 1x 4 sqmm as earth wire (for ACs)

4x 6 sqmm +1x 6 sqmm as earth wire( from main panel/DB to sub DB)

4x 16 sqmm + 1x16 sqmm as earth wire ( from main panel/DB to sub DB)

Supply and fix sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete one SP MCB 20 Amps including taking down the old one complete all as specified and directed by Engr-in-charge.

Supply and fixing Sheet metal enclosures double door for vertical MCCB DB ,Triple pole and neutral , 4 way, 415 volts with 200 Amps rated bus bar incl Incoming MCCB 100A (adjustable) 25KA, 'C' curve TPN - 01 No and incl Outgoing MCB 6-32 A 'C' Curve SP -12 Nos including taking down the old one complete all as specified and directed by Engr-in-charge.

Supply and fixing Sheet metal enclosures double door for vertical MCCB DB ,Triple pole and neutral , 12 way, 415 volts with 200 Amps rated bus bar incl Incoming MCCB 250A (adjustable) 25KA, 'C' curve TPN - 01 No and incl Outgoing MCB 6-32 A 'C' Curve SP -36 Nos including taking down the old one complete all as specified and directed by Engr-in-charge.

Supply and fix for high efficiency wall mounted 10 watts LED batten light fitting with extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver long with slim and sleek looks with reflector cover channel complete with all accessories internally pre wired and including connecting up with 3 core twisted flexible copper conductor cable with 0.5 Sqmm from ceiling rose to fitting including taking down the old one complete all as specified and directed by Engr-in-charge.

Supply and fix Energy saving,25 watts LED street light fitting , by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI, prewired and including connecting up with 3 core flexible copper conductor cable of 0.5 Sqmm from ceiling rose to fitting including taking down the old one complete all as specified and directed by Engr-in-charge.

Supply and fix heavy duty industrial batten with precoated CRCA body suitable for retrofit LED 1/18/20 watt tube including self ballasted retrofit LED tube with PC cover/body with high lumen tube, 6500 K, including taking down the old one complete all as directed .

Supply and fix for high efficiency recess mounting type, 36 watts, LED light fitting ,230 Volts, maximized glare free out put 2' x2' (600mmx600mm) size complete with all accessories internally pre wired and including connecting up with 3 core flexible, copper conductor cable from ceiling rose to fitting including taking down the old one complete all as directed by Engr-in-Charge.

Supply and fix for high efficiency surface mounting type, 36 watts, LED light fitting ,230 Volts, maximized glare free out put 2' x2' size complete with all accessories internally pre wired and including connecting up with 3 core flexible, copper conductor cable from ceiling rose to fitting including taking down the old one all as directed by Engr-in-Charge.

Supply and fix in repair of Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V all as specified and as directed.

Supply and fix for CIMFR Certified LED Flameproof batten suitable for single and twin T8 tube of 16W/20W recommended for Gas with necessary arrangements including taking down the existing unserviceable fittings complete all as directed by Engr-in-Charge.

Supply and fix high luminous efficiency LED tube (Pin type) not less than18W 4 ft suitable for LED flame proof light fitting including taking down the existing unserviceable fittings complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair heavy duty exhaust fan with louvers ,300 mm sweep, AC, single phase, 230/240 volts complete all as specified .

RD ENTERPRISES

Green Ray Technologies

SREE BALAJI ENTERPRISES

D Subramani and Sons

lakshmibuilders

S MARI CONTRACTOR

SIVA ENTERPRISES