a) Upgradation of lane by way of laying of Paver tiles in lane adj. Durga cloth House upto H/o Satpal, lane No 3, Sector-2, Durga Nagar, Talab Tillo in W.No 40

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles above 25 mm and upto 40 mm

Providing under layer including preparation of ground 75mm thick (un compacted) layer of dry stone aggregate & grouted with sand. (Complete Job).

Providing and Laying in position cement concrete. of specified grade excl. the cost of centering and Shuttering all work upto Plinth level (1:3:6) 1 cement: 3 coarse sand: 6 crushed graded stone Agg. 20mm nominal size

Providing and Fixing of 60 mm thick I-Section paver tile over a layer of cement sand mortar 1:4 mix.

Engagement of labour for site clearance

Supplying and stacking of graded stone Aggregate at site of size range (Excl. carriage 63mm-45 mm.

Laying Water Bound Macadam with specified stone agg. Stone screening and Binding material incl. screening, sorting, .spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete (Payment for stone aggregate Screening Kankar morum and red bajri etc to be made separately) base course with 63mm to 45 mm nominal size.

Providing and applying tack coat using hot straight run bitumen of grade 80/100 incl. heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitmen boiler, cleaning and preparing the existing road surface as per specifications on W.B.M @ Rs 0.75 Kg/Sqm

2cm Premix carpet surfacing with 1.8 cum & 0.90 cum of stone chipping of 13.2 mm size & 11.2 mm size respectively per 100 Sqm and 52 kg and 56 kg of hot Bitumen per cubic metre of stone chippings of 13.2mm and 11.2 mm size rexpectively incl. consolidation with road roller of 6 to 9 ton capacity etc with paving asphalts 80/100 heat and then mixed with solvent @ 70 gm /kg of asphalt

Providing and laying seal coat of premixed fine aggregate (Passing 2.36mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade 80/100 bitumen /cum of fine aggregate and 0.60 cubic metre of fine aggregate per 100 sqm of road surface incl. rooling and finishing with road all complete

Dismenatlling of bituminous road surface

Removal of Excavated malba dismantled unserviceable material from the site of work by mech. Transport / Animal Transport or otherwise including loading complete job.

Carriage of material by Mech.Transport

a)Aggregate

b)Sand

M/s Tiger Engineers

M/S SIDHI VINAYAKCONST.