Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.2 LAccepted-Finance | 1 | Accepted-Finance The bidder has fulfilled the prerequisite formalities and stands qualified | |
| 2 | 2₹1.2 L+₹1,880 (1.61%)Accepted-Finance | 2 | Accepted-Finance The bidder has fulfilled the prerequisite formalities and stands qualified | |
| 3 | 3₹1.2 L+₹3,780 (3.23%)Accepted-Finance | 3 | Accepted-Finance The bidder has fulfilled the prerequisite formalities and stands qualified |
Tender Value
₹1.2 L
EMD Value
₹2,390
Closing Date
29 Dec 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer PHE Mech. Div. South Awantipora
Executive Engineer PHE Mech. Div. South Awantipora
Providing, Fitting, Testing and Commissioning of Open Well Submersible Unit at WSS Pratabpora under M and E Non Plan.
2022_PHE_199812_3
JSD/PHE/MDSA/ e-NIT No. 80
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
30 days
Pratabpora
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Yes
Executive Engineer PHE Mech. Div. South Awantipora
₹2,390
Yes
7 Jan 2023
16 Dec 2022
30 Dec 2022
16 Dec 2022
29 Dec 2022
16 Dec 2022
Amount
Supply, Installation, Testing & Commissioning of Vertical Open Well Pumping Units as per 14220. PUMP: - • Type of pump : Open well Submersible Pump (vertical ) Discharge: 3000GPH Head: 90M • Quality of Water to be handled : Clear water MATERIAL OF CONSTRUCTION: • Pump Casing : Cast Iron • Impeller : SS • Pump Shaft : Stainless Steel 410 • Motor Body : Cast Iron/SS • Sealing : Dual mech. seal The bowl plate shall be provided with name plate giving complete specifications MOTOR: - • Method of starting: Star – Delta/DOL (as specified). • Capacity of motor : Not less than 7.5 HP • Frequency : 50Hz + 3% • Voltage : 415 + 6 %, - 15% 3phase • Class of insulation: Suitable for above rating. • Sealing : Dual mech. seal. Provided with thermal and overload protection. The motor shall be made of corrosion resisting materials to resist corrosion under normal conditions and the motor shall have a name plate giving complete specifications: Note: Test certificate having the Serial No. of the Pumping Unit along with the performance curve in duplicate from the Manufacturer must be produced on delivery of the item and pumping unit is to be approved from the concerned Sub Divisional office before procuring.
Providing & fitting of 8'' Long, 80 mm dia. Pump connector to be fabricated out of G.I pipe-class C with one end flanged duly welded and other end threaded aas per delivery size of pump.
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units . The body and bonnent of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber(Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions It shall have electrostatic epoxy coating(approved for drinking water) both inside and outside of the valve. The valve shall be supplied along with hand wheel. Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work. The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement. Size : 80 mm , PN 1.6/16
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve( NRV) as per IS 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber(Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions. It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve. Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work. The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement. Size: 80mm PN: 1.6/16
Providing/supplying and fitting of G.I flanged intake pipe to the liner . The Pipe shall be hot dip Galvanized, class-C confirming to IS 1239. The job includes providing and fitting of M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16). The flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. Flanges (as per IS 6392/1997 Table:17) Thickness shall conform to IS 6392 Part 1st Table-17. The flange welding shall be carried out in double layers using reputed make electrodes to form strong welding joint. Welding Electrode DC Arc Welding using welding electrode having diameter not less than 4mm. Nuts and Bolts Nuts and Bolts (conforming to IS:1363 Part 1st) Rubber Insertion Gaskets Rubber Insertion Gaskets (conforming to IS: 638/79) to be used between flanged joints. The rising main is to be laid as per the instructions of the engineer in charge and site requirement. Size : DN 80 Class: C (Heavy)
Cutting of hot dip galvanized G.I, pipe across the section by dint of pipe cutter/ gas cutter. The job also includes Providing and welding of M.S flanges to the two ends of pipe. The Thickness of flange shall conform to IS 6392 Part 1st Table-17. The flange welding shall be carried out in double layers using Advani/Esab/L&T- SS Bond make electrodes to form strong welding joint by dint of DC arc welding. The job further includes Providing and Fitting of nuts and bolts (conforming to IS:1363 Part 1st) and Rubber Insertion Gaskets (conforming to IS: 638/79) to be used between flanged joints. The size of the pipe is 80 mm
Fabrication ,Providing and fitting of 90-120 degree bend/elbow to be fabricated out of G.I pipe, 1 m length and flanged on both ends a to make it leak proof. The flanges shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. Size:DN 80 Class: C
S T ELECTRICAL ENG WORKS PEERNAR TRAL
Rayees Electric Engineering Works
tech_eval.pdf
fin_eval.pdf
finance_533386.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .