Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.8 LAccepted-AOC HDLX 31 JASUJA CITY JABALPUR MP 482003 | JABALPUR | MADHYA PRADESH | 482003 | L1 | Accepted-AOC L1 bidder lowest | |
| 2 | L2₹31.9 L+₹1.2 L (3.93%)Rejected-Finance 37A 115 MADHU NAGAR AGRA 282001 UP | AGRA | AGRA | UP | 282001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹32.7 L+₹2.0 L (6.53%)Rejected-Finance AZAD NAGAR RANJHI JABALPUR MP 482010 INDEX NO E 106 JBP | JABALPUR | MADHYA PRADESH | 482010 | L3 | Rejected-Finance Other than L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
9 Sept 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Jabalpur
Garrison Engineer (West) Jabalpur Supply Marg Post Box No.54 Jabalpur Cantt-482001 (MP)
DOOR TO DOOR MAINTENANCE WORKS FOR OTM/MD ACCN IN THE AREA OF AGE B/R-III UNDER GE (WEST) JABALPUR
2023_MES_612709_1
8615/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Jabalpur
As per tender documents
7 documents required · 7 mandatory
₹500
GE (West) Jabalpur
₹70,000
20 Sept 2023
8 Aug 2023
14 Sept 2023
9 Aug 2023
9 Sept 2023
21 Aug 2023
9 Aug 2023 - 16 Aug 2023
Amount
Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with fixed over and including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.
M&L for Glazed ceramic tiles 300mmx200mm x 6 to 7 mm thick, on vertical surfaces of walls ( DADO) etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) fixed over and including 10mm thick rendering in CM 1:4 etc all as specified and directed.
M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete etc all as specified and directed.
M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) repairs of tiles in patches work for area not exc 5 Sqm area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) fixed over and including screed bed 15mm thick rendering in CM 1:6 etc all as specified and directed.
M&L for Non Skid ceramic tiles 9 to 10 mm thick ( square / rectangular) area of Each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting, dados in vertical surfaces etc fixed over and including 10mm thick cement plaster 1:4 complete etc all as specified and directed.
M&L for vitrified ceremic tiles 10 mm thick, in LIGHT SHADE, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete etc all as specfied and directed.
M&L for vitrified ceramic tiles 10mm thick LIGHT SHADE(square/rectangular) polished area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match Coloured fixed over and incl plaster (backing coat) in 1:4 CM, 10mm thick etc all complete.
Material and labour 20- 25 mm thick machine cut kota stone flooring laid and jointed with neat cement slurry mixed with pigment to match the shade of the slab laid over and including 20 mm thick bedding layer in cement mortar 1:6 including rubbing and polishing etc complete all as specified..
M&L for 18 to 20 mm thick machine cut kota stone as in vertical surfaces risers of steps , skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete etc all as specified and directed.
M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:6 complete all as specified and directed.
Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) all as specified.
M&L for 25mm thick cement concrete Type B-0 1:2:4 (Using 12.5mm graded stone aggregate ) as in sub base to receive tiles etc all complete.
M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete etc all as specified and directed
M&L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) etc all complete.
Demolition of brick work as in walls/parapet wall,s removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces .
M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in cement mortar 1:6 etc all complete .
M&L for Brick work with sub class ‘B’ brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete .
Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area exc 1.5 Sqm but n-exc 4 sqm each complete all as specified and as directed.
Taking down Shutters of any description n.exc 1 Sqm each complete all as specified and as directed.
Taking down Shutters of any description exc 1 Sqm but n exc 2.0 sqm each complete all as specified and as directed.
Refixing of shutters including taking down easening and adjusting and also refixing hardware as required including renewal of unserviceable screws etc. of any description n exc 1.0 sqm each, in same opening all as specified and as directed.
S&F pressed steel door frame 105x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick , etc complete, as specified and directed.
S&F Pressed steel frames for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S&F in repairs Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.
M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and directed.
S & F 40 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides decorative face veneer with lipping/frame to match supplied and fitted to chowkats complete all as specified and as directed..
S & F 25 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats.all as specified and directed complete all as specified and as directed.
S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.
S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.fitted to chowkhats for doors etc complete all as specified and as directed.
S&F for 30mm thick 2nd class H/W glazed skelton shutter for window/ventilator, open rebated and prepared to receive glass , gauze etc (with sash bars) edges of framing plain chamfered or rounded , fitted with cut and mitered beads for securing glass etc; size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.
S&F steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as specified and directed.
S&F steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or weldedcomplete all as specified and directed.
S&F steel windows or ventilators, fixed type with glazing bars.
S&F PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specificationn complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC ,C, channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement etc all complete all as specified and as directed.
S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed
S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed
S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.
S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.
S&F mild steel cold rolled medium weight butt hinges 75mm size fixed screws to wooden frames or with welding to steel frames all as specified and directed by Engr-in-charge.
S&F continuos (piano) hinges,mild steel bright finish or electrogalvanised,width of flaps 30 mm all as specified and directed.
S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.
S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed.
S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.
S&F door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width all as specified and directed by Engr-in-charge.
S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.
S&F 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and directed
S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified.
S&F in repairs 9 mm thick prelaminated particle board interior grade,prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work etc all as specified and directed.
S&F in repairs 18/19 mm thick prelaminated particle board interior grade,prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work etc all as specified and directed.
S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified
S&F 4mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 sqm each panes etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.
S&F in repairs 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified
S&F in repairs 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified
S&F in repairs, double action floor door closer, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium doors and fixed complete all as specified and directed.
S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width all as specified and directed by Engr-in-charge.
S&F in repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified.
Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge.
Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed by Engr-in-charge.
S&F in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed etc complete all as specified and directed
S&F in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed etc complete all as specified and directed
S&F in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed etc complete all as specified and directed
S&F in repair aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.
S&F in repair 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.
S&F in repair extruded aluminium alloy handles, fabricated type, anodised of size 150 mm etc complete all as specified and directed.
S&F in repair extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed.
S&F in repairs 140mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.
S&F in repair aluminium mortice lock,vertical type size 75mm 4 lever complete all as specified and directed
S&F in repair mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames all as specified and directed by Engr-in-charge.
S& F in repair 40mm dia cup board knob fixed with nut and washer of mild steel,bright finished complete all as specified and directed
S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.
S&F in repairs mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works etc complete all as specified and directed.
S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-290 ( Gde E-165) complete all as specified and as directed.
M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed.
Taking down old steel tubing & connection of 15mm bore complete all as specified and as directed.
Taking down old steel tubing & connection of 20mm bore complete all as specified and as directed.
S&F Tubes medium grade, 15mm bore galvanised with all fittings and fixed complete to wall (Conceiled)and ceiling or laid in floors Complete all as specified and directed.
S&F Low density poly ethylene pipes 15mm bore (LDPE) of pressure rating 6 kg/ cm2 laid in trenches ,complete all as specified and directed.
S&F Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall (Conceiled)and ceiling or laid in floors Complete all as specified and directed.
S&F Low density poly ethylene pipes 20mm bore (LDPE) of pressure rating 6 kg/ cm2 laid in trenches ,complete all as specified and directed.
Re-fixing Tubes medium grade, 15mm bore galvanised with all fittings and fixed complete to wall (Conceiled)and ceiling or laid in floors Complete all as specified and directed.
Re-fixing Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and as directed.
Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.
S& F in repairs concealed type stope valve cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.
S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair for 15mm chromium plated brass WHB mixer fancy type swan neck long nose- screwed down high pressure with or without lettered hot and cold and flynuts 15 mm dia complete all as specified and directed.
S&F in repair 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe
S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall Size 915mmx460mm with bowl size 410mm x330mm x 160mm of make Nirali and equivalent Complete all as specified and directed.
S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm of make Nirali and equivalent Complete all as specified and directed.
S&F in repairs Soap dish, stainless steel approx size 160mm x 160mm x 90mm etc complete all as specified and directed.
M&L for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed.
S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts etc complete all as specified and as directed.
S&F in repair PVC connection 600 mm long, 15mm size with PTMT nuts etc complete all as specified and as directed.
S&F in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and as directed.
S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms) Complete all as specified and directed.
S& F in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed
S&F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed.
S&F in repairs 100mm dia cast iron floor trap plain with grating including jointing and fixed with cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F in repairs 75mm diaPTMT multi floor trap plain with grating including jointing with solvent cement etc complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store complete all as specified and directed.
S&F in repairs 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed.
S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete.
S&F in repairs 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with access doorrubber rings ljoits fixed to walls complete all as specified and as directed.
S&F in repairs PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door
S&F in repairs 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.
S&F in repairs 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.
S&F in repair vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good etc all as specified and directed.
S&F in repair vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed.
S&F in repair PTMT bottle trap ( with internal partition) 32mm bore having minimum water seal of 25mm(Minimum weight 32mm-260 gms complete all as specified and directed.
S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, with pedestal complete all as specified and directed.
S&F in repairs 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified.
S&F in repair Plastic water closet seat cover white closed pattern with flat bottom cover and mild steel chromium plated or aluminium hinging device complete all as specified. Make- as approved by GE.
S&F in repiar CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed all as specified and directed.
S&F in repiar CP waste fittings brass chromium plated for sink 40mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed all as specified and directed.
S&F CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed all as specified and directed.
S&F CP waste fittings brass chromium plated for sink 40mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed all as specified and directed.
S&F in repair Flush pipes to pedestal pan, size including all joints complete all as specified and directed,
S&F in repair Flush pipes to squatt pattern closet including all joints and making good to the floor complete all as specified and directed,
Supply only integral water proofing compound
Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water all as specified and as directed.
M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed.
M&L for rendering on concrete/brick surfaces 15mm thick in CM 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified .( Note:- WPC measured and paid saperately)
M&L for 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement complete all specified and as directed.
M&L for Preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a one coat of red oxide primer complete all as specified
M&L for Preparation of newly wooden surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer com all as specified.
M&L for preparation of newly plastered surfacces and applying three coat of white wash as in ceilling complete all as specified and as directed.
M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over 3 mm thick wall care putty on wall plastered surface complete all as specified and as directed.
M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed.
S & F suspended prepainted false ceiling, self design, self texture, using chicago metalic (E grid) exposed suspended system, grid section size 600mmX600mm comprising of GI powder coated main runner of dimensions 39mm X 24mm X 08mm thick (thickness comprising of GI /0.4+PPPCGS/0.3mm & weight of runner 1.35kg for 3600mm length) cross tee of dimensions 29mm X 24mm X0.8mm thick and thick wall angle 22.2mm X 22.2mm X 0.65mm thick (thickness comprising of GI/0.35+PPPCGS/0.3mm & weight of angle 0.70kg for 3050mm length) with and including 4mm thick HPSC (high pressure steam cured) pre-primed, self embossed, texture designer board, water resistant termitant, fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (wt -0.007kg/clip hold down clips (wt- 0.0035kg/clip) with provn of light fixture complete all as specified and directed.
S&F in repair stainless steel chromium plated fancy type curtain buds (finials) suitable for curtain rod 19mm to 20 mm dia complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel chromium plated fancy type curtain buds (finials) suitable for curtain rod 19mm to 20 mm dia complete all as specified and directed by Engr-in-charge.
S&F in repair, Stainless steel pipe 19 to 20 mm dia Drapery rod fancy type with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as specified and directed.
S&F in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower complete Make Prayag,Hindware,Parryware
S&F in repair C P glass corner shelf set of three single including Screws and CP bracket complete all as specified and as directed.
Supply and fixed in repairs PVC waste pipe 32mm bore of size and 900mm long complete all as specified and directed.
Supply and fixed in repairs PVC waste pipe 40mm bore of size and 900mm long complete all as specified and directed.
S&F in repair, health faucet with wall hook and 1.0m chrome plated PVC hose pipe complete all as specified and directed. Make :- Jaquar Cat Part No- ALD 565
S&F in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.
S&F in repair, chromium plated, Toilet paper holder complete all as specified and directed.
S&F in repairs Towel ring brass chromium plated round type fixed with screws and wooden or plastic cleats etc complete all as specified and as directed.
S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern complete all as specified and as directed.
Petty repairs to leaking bib cock, pillar cocks, Stop cock, angle valve of any description by changing the jumper valve, washers etc and making functional, ensuring proper water supply complete all as specified and directed by Engineer in charge
S& F in repairs chromium plated shower rose 300 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and asdirected .
S&F in single piece slim concealed flushing cistern with wall mounted frame, installation kit and 'S' type drain pipe connection set for wall hung WC including all fittings complete and all as specified and as directed .
Cleaning of water pipe line in GI pipe dia of 15mm to 25mm and making the water supply available upto water taps including attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified and as directed
M/s Om Infracon
B G PANDEY AND BROTHERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .