Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹14.2 L+₹32,583.34 (2.35%)Rejected-Finance GROUND FLOOR A 749 G D COLONY MAYUR VIHAR PHASE III EAST DELHI | L2 | Rejected-Finance DISQUALIFY DUE TO L2 | |
| 3 | L3₹15.9 L+₹2.0 L (14.7%)Rejected-Finance | L3 | Rejected-Finance DISQUALIFY DUE TO L3 | |
| 4 | L4₹17.3 L+₹3.5 L (25.0%)Rejected-Finance NO 13 1 15 BLOCK V CENTRAL STREET 7TH CROSS KUMARAPARK WEST BANGALORE KARNATAKA 560020 | BENGALURU URBAN | KARNATAKA | 560020 | L4 | Rejected-Finance DISQUALIFY DUE TO L4 |
Tender Value
Refer Docs
Closing Date
16 Aug 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GC MMG
C-56/1, ANUSANDHAN BHAWAN, SECTOR 62, NOIDA
STRUCTURAL AND ELECTRICAL REQUIREMENTS FOR COE LAB SETUP AT C-DAC, ACADEMIC BLOCK
2022_DIT_705453_1
11(5)/2022-MMG/01
Open Tender
Miscellaneous Works
Works
30 days
CDAC, ACADEMIC BLOCK NOIDA
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
CDAC NOIDA
27 Sept 2022
5 Aug 2022
17 Aug 2022
5 Aug 2022
16 Aug 2022
9 Aug 2022
5 Aug 2022 - 16 Aug 2022
8 Aug 2022
GENERAL : All items of work contracted for shall be executed strictly in accordance with the description of the item in the Bill of Material; specifications read in conjunction with the appropriate Indian Standard specifications and conditions of the contract and established Engineering practices. The repair work shall be done by the contractor in case, any damage is done to the existing structure during the job work”
Providing and fixing aluminum work with powder coated aluminum (minimum thickness of polyester powder coating 50 micron ivory color) for partitions in aluminum frame work consisting of floor, ceiling and intermediate Aluminum sections 2½” X 1½” of 14 gauge at the spacing of 610 mm center to center horizontal and vertically with suitable anchor dash fastener fixed flush to walls including Aluminum L Angle, cleats, S.S. Screws etc. and for doors, windows, ventilators and with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mired and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete including making provision for fixing of fittings wherever required and as per the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately).
Providing and fixing S.S. dash Fasteners in brick/ RCC wall of appropriate 100mm size (4 nos on each vertical partition member and @ 600mm c/c for flooring member including Cost of dash fasteners etc. complete.
Providing and fixing etching / line design glazing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item).
Providing and fixing 12 mm thick pre-laminated particle board with decorative lamination on both sides, flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
Providing and fixing Aluminium handle (powder coated) 450 mm long with C.P. brass / stainless steel screws etc. complete for aluminum door.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000mm), with double speed adjustment with necessary accessories and C.P. brass / stainless steel screws etc. complete for aluminum door.
Labor charges for fixing Aluminum door with Aluminum frame of approximate size 3' X 7' in position along with hydraulic door closer including fixing Brass 100mm mortise and cylinder latch and lock with 6 levers, pair of handles including labour charges for opening the Aluminium frame and glass panel, removing old rubber gasket, providing and fixing new EPDM rubber/neoprene gasket for filling up the gaps at junctions, i.e. at top, bottom and both sides with required, providing and fixing necessary C.P. brass / stainless steel screws / dash fasteners of required sizes including minor repairs, making good in all respect, fixing new Aluminum snap beading for glazing / paneling wherever required etc. complete. Note: i) Aluminum door with frame and hydraulic door closer will be supplied free of cost ii) Aluminum snap beading for glazing / paneling shall be paid separately in weight bases under relevant item iii) Providing and fixing new Brass 100mm mortise and cylinder latch and lock with 6 levers if required shall be paid separately as per actual quantity under relevant item iv) Providing and fixing new hinges if required shall be paid separately as per actual quantity under relevant item.
GYPSUM BOARD PARTITIONS: Providing and fixing 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board both faces conforming: to IS 2095: (part 1) : 1996 (Board with BIS certification marks) up to ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm center to center with dash fastener of 12.5 mm diameter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to center by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm center to center, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm center to center. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanized M.S. fixing channel of 99 mm width(0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120gms/sqm (both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. Mode of measurements: -i) The length and height shall be measured correct to a cm. and area shall be calculated in square meters correct to two place of decimal. No deduction will be made for openings of areas upto 0.40 sqm and for openings exceeding 0.40 sqm. in area, deduction in measurements shall be made i.e. for doors and glazed windows etc. as per actual. ii) No extra payment for material or labour involved in forming such openings shall be made.
Providing and fixing 12mm thick medium density fiber (MDF) board exterior grade (Grade-I) IS 12406: 2003 marked of approved brand and manufacture, to Aluminium Partition frames in paneling with C.P. brass/stainless steel screws @ 200 mm center to center, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand, including providing and fixing wooden beadings at all edges and top, finishing etc. complete all as directed
Providing and fixing 1 mm thick decorative laminates of approved brand and manufacture on both sides mdf partitions walls in required color and shade using approved adhesives using Fevicol HEATX or equivalent, fixed flat and shall have smooth and level surface, pressing hard without any bubbling etc. complete all as directed. (Makes: MARINO, FORMICA, GREENLAM OR DURO, DURIAN AND VENTURA)
Providing and applying acrylic emulsion paint of approved brand and manufacture in two or more coats on new work for Gypsum walls / old Masonry walls including preparing the surfaces, scrapping the masonry walls, applying putty, sand papering etc. to give an even shade.
Labour charges for dismantling laminated gypsum wall/ wooden / glazed partition carefully, disposing of the scrap materials with in a lead of 50M and handing over the serviceable materials etc. complete all as directed.
Providing and fixing 12 mm thick toughened glass door shutter of approved brand and manufacture comprising of double leaf glass door shutters each of approximate size 6’-7½”X3’-0” including providing and fixing teak wood frame of appropriate approved section (as per the measurement/requirement), S.S. Door handles (Four Nos.) of long size from inside and outside, Godrej locks (Two Nos.), S.S. Hinges (Eight Nos.) and aluminum tubular type universal hydraulic door closer heavy quality for each door of approved brand and manufacture, making provision of access control mechanism for both door and the wooden frame by providing and fixing wooden framing on the outer edges of glass doors on three sides (top, bottom and one vertical) comprising of total 50mm thickness; 150mm wide wooden frame finished smooth with teak veneer, polishing all wood work including Etching on two glass door (any art like flower etc.) commissioning the system etc. complete all as per sample and as directed. Note: The Contractor shall take actual measurement for 12 mm thick toughened glass door shutters for all the four doors and fixed panels as per site requirement including making provision fittings and fixtures, handles etc., before toughening of glass Mode of Measurements: Net Actual Area of all the glass doors in Sq.M. shall be measured for payment duly certified by C-DAC Representative. The quoted rate shall inclusive all the materials, fittings & fixtures, cartage and labour charges etc. complete. Mode of Measurements: Net Actual Area of all the glass doors in Sq.M. shall be measured for payment duly certified by C-DAC Representative. The quoted rate shall inclusive all the materials, fittings & fixtures, cartage and labour charges etc. complete.
Providing and fixing etching / line design glazing With float glass panes of 12 mm thickness above glass door inside wooden frame with EPDM rubber / neoprene gasket etc.(if required)each of approximate size 6 ft x 2 ft complete as per the architectural drawings and the directions of engineer-in-charge. Glass must have etching of “Centre of Excellence” and design will be provided to the contract awardees.
ELECTRICAL WORKS :
Making of dedicated earthing with copper earth plate 600x600x3mm thick, earthing conductor 25x5mm thick copper strip including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 4.2meter long etc. with charcoal/ coke and salt as required. Note: 1. “Earth Resistance <1.0 ohm” and Neutral to Earth Voltage of up to 2% (i.e., 0.5V) 2. Cost of digging, refilling of earth and finishing etc. will be included in the scope of work.
Supplying, laying and connecting of dedicated earthing wire of 1x6 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required. Note: Cost of thimble, accessories and hardware etc. will be included in the scope of work.
Supply, installation, testing and Commissioning of Isolation transformer complete with all standard accessories as per relevant standards and specification given below. 1. Type - Dry type, Floor mounted, Indoor application 2. type of cooling - Naturally air cooled 3. Type of connection - Delta / star 4. Primary / Secondary voltage - 1:1 5. Regulation - < 3.5% 6. Duty cycle - Continuous 7. Class of insulation - class F 8. Type of lamination - CRGO 9. Type of winding - Copper 10. Ambient temperature - 50˚C 11. Humidity - > 95% RH 12. DC Galvanic Isolation - > 1000 MΩ 13. Dielectric voltage - 2500V for 2 min 14. Leakage current - < 20 micro amps 15. Coupling capacitance - 0.001PF 16. CMNRR - > 100 dB 17. Degree of protection - IP 31 18. Construction standard - As per IS: 2026 Part I & II 19. Power Factor - 0.75 Lagging to 0.75 Leading 20. KVA rating - 15 KVA Isolation Transformers shall be all complete as per specifications, relevant standards Note: 1. Cost of unloading, shifting and placing etc. will be included in the scope of work. 2. Cost for termination of cable (material & labour) will be included in the scope of work.
Supply and laying of one number dedicated 1.1kV grade, 4 core 10 sq.mm. XLPE insulated, FRLS, Copper conductor, galvanized steel tape armoured power cable as per specifications. The cable shall be laid on wall/ceiling surface as required. The cable shall be clamped at regular intervals to the supports on wall using clamps and fasteners as per technical specifications and relevant standards (For Raw power from ground floor till room no: 228). Note: Cost of accessories like thimble, double compression brass glands, clamps and hardware etc. will be included in the scope of work.
ESD Flooring in room no: 226 & 227 with the following specifications: Material Conductive vinyl Thickness 2mm Layer 3 layered Surface Non-shining Hardness (ISO 7619) 75 ± 5 shore A Abrasion Resistance (ISO 4649, method A) <+200 mm3 Cigarette burning resistance (EN1399) No burn Chemical resistance (EN423) Resistant to chemical agents normally used for maintenance Dimensional Stability (EN424-6h/80°C) <= 0.4% Surface Resistance Top Layer (EN 100015.1-IEC61340) About 108 ohm Surface Resistance Bottom Layer (EN 100015.1-IEC61340) About 105ohm Anti static Cotton Apron (Blue color) Size:XL; Qty:10 no. Wrist band with cord(button) 10 no. ESD Slipper 10 no. Latex Gloves 1 packet ESD Round cap 10 Note: ESD Floor should be properly connected to ESD earthing
radha interior Private Limited
KARTIK INFOTECH SERVICES
CONVERGENT TECHNOLOGIES INDIA PVT. LTD.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .