SPECIAL REPAIRS TO TOILET BLOCK OF P-12 (CONTINGENT CDR) AND P-13 (ANO BLOCK) AT DGNCC CAMP IN THE AREA OF AGE BR III UNDER GE EAST DELHI CANTT-10

Amount

Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and as directed.

Taking down cement plaster from brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each and removing from site, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each and removing from site, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.

100mm size butt hinges (medium weight) colled rolled mild steel fixed with welding, complete all as specified and as directed.

Stainless steel barrel tower bolt of extruded section 150mm size, complete all as specified and as directed.

Stainless steel handles fabricated type of size 150mm size, complete all as specified and as directed.

20mm dia curtain rod of stainless Steel Grade 304 bright finished , pipe thickness 1mm thick including fixing brackets, stops, rollers and designer end bulbs for both ends, fixed in repairs, complete all as specified and as directed.

Anodized aluminum alloy powder coated standard hollow section for window three tracks including aluminum frame/chowkhat with following specifications including anodized aluminum snap beading, channels, 5mm thick tinted glass, glazing clips joint cleats, rubber gasket etc and other accessories complete all as specified and as directed:- (a) Frame of section:- 83.50mm x 44.45mm x 1.60mm thickness. (b) Sliding window section (Channel):- 61.85mm x 31.75mm x 1.2mm thickness. (c) Sliding shutters of section:- 40mm x 18mm x 1.20mm thickness with locking arrangement. Note:- (i) The rates also including the cost of cutting, waste and making good disturbed surface matching with existing surface and finish. (ii) Minimum thickness of powder coating shall be 50micron.

Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar , aluminium section weighing 0.55 kg/m including necessary joining cleate , glazing clips, rubber packing , anodised aluminium snap beading screws etc., complete all as specified and as direced.

75 MM thick plain Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and fair at top without using extra cement and providing joints 40mm deep and 12 mm wide in plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as and as directed.

Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each as in vertical surfaces of dados/skirtings/sides of pillars etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing layer in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Anti skid ceramic coloured floor tiles 7-8mm thick, size of each tile exceeding 0.11Sqm and not exceeding 0.18Sqm, as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4, including dismantling old tiles with backing layer in cement mortar, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 450mm x 300mm x 6-7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in CM 1:4, including dismantling old tiles with backing layer in cement mortar, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper applied over a layer of Birla White/JK White wall care putty duly smoothened with sand papers, complete all as specified and as directed.

Preparing newly plastered surfaces of wall and applying two exterior acrylic emulsion weather shield paint applied over a layer of Birla White/JK White wall care putty duly smoothened with sand papers, complete all as specified and as directed.

Cleaning of concrete surfaces with wire brushes and washing the surface free of dust and loose particles, complete all as specified and as directed.

10mm dia Aqua TP grouting nipple upto 75mm(+) depth by drilling 20mm bore holes and fixing in cement mortar as per instructions of M/S AAYKA WATERPROOFERS PVT LTD or equivalent manufacturer, complete all as specified and as directed.

Grouting of 10mm dia Aqua TP grouting nipple upto 75mm(+) depth by drilling 12mm bore holes and fixing in cement mortar using DR. MIRACLE WAC @ 5 Kg/Sqm average grout prepared by mixing DR MIRACLE WAC powder with water and 2% DR MIRACLE RETROMER (Part 'B'),grouted with Grouting Pump @ 5-7 Kg/Sqcm pressure, complete all as specified and as directed.

Grouting by 3 stage methodology, fixing of 19mm dia Aqua TP grouting nipple upto 75mm(+) depth by drilling with 20mm bore holes and fixing in cement mortar, using DR. MIRACLE SS/WAC/RTF @ 250 Kg/Sqm average grout prepared by mixing DR MIRACLE SS powder with water and 2% DR MIRACLE RETROMER(Part 'B') grouted with Grouting Pump @ 10 to 12 Kg/Sqcm pressure, complete all as specified and as directed.

Removal of nipple and making surface fair and even by using DR MIRACLE HYFLEX [ 2 Component] @ 4Kg/ Sqm (1.5 Kg polymer : 2.5 Kg DR MIRACLE Part 2), complete all as specified and as directed.

Providing AQUADRIP metal sections over joints after packing with EP BOARDS and silicone sealants, complete all as specified and as directed.

Providing AQUAVENT1275* moisture release system, complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, including taking up or down of existing unusable old GI tubing, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, including taking up or down of existing unusable old GI tubing, complete all as specified and as directed.

PVC 110mm bore (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors, fixed in repairs, complete all as specified and as directed.

PVC 75mm bore (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors, fixed in repairs, complete all as specified and as directed.

PVC (SWR) bend of 110mm bore any radius, ixed in repairs, complete all as specified and as directed.

PVC (SWR) bend of 75mm bore any radius, ixed in repairs, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore, including taking down of existing unusable/broken PVC water tank, complete all as specified and as directed.

15mm bore, fancy type two way bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge. (Make : Jaquar Cat Part No. KUP-35041PM or equivalent in Somany/Cera/Hindware).

Sheet glass shelf assembly of 600 mm consisting of 5.5mm thick sheet glass shelf with chromium plated brass brackets guard and railing, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. ACN-1171N or equivalent in Somany/Cera/Hindware).

Sheet glass corner shelf assembly of 300 mm consisting of 5.5mm thick sheet glass shelf with chromium plated brass brackets guard and railing, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. ACN-1173 or equivalent in Somany/Cera/Hindware).

CP brass towel rack 600mm long fixed to wall with CP screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Pt No. ACN-1181S or equivalent in Somany/Cera/Hindware).

CP brass towel rail 600mm long fixed to wall with CP screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. ACN-1111NM or equivalent in Somany/Cera/Hindware).

CP brass towel ring fixed to wall with CP screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. ACN-1121BN or equivalent in Somany/Cera/Hindware).

Soap dish , fancy type, fixed to walls with chromium plated brass screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. ACN-1131N or equivalent in Somany/Cera/Hindware).

CP toilet papper holder with stainless steel fixed to wall with CP screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. APN-35751P or equivalent in Somany/Cera/Hindware).

Vitreous chinaware table top wash hand basin (WHB) of size 595mm x 440mm x 185mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe etc., fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. KUS-WHT-35901 or equivalent in Somany/Cera/Hindware).

Single piece WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set, Cistern fittings, Size: 366 x 655 x 765mm, S Trap-300mm vitreous china, pedestal pattern European type 32 mm dia PVC flush pipe and connection to drain, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. LYS-WHT-38851S or equivalent in Somany/Cera/Hindware).

CP health foucet with connection fixed to wall with CP screws & connection to tap, fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No. ALD-CHR 593N or equivalent in Somany/Cera/Hindware).

Wall Mixer with connector for Hand Shower Arrangement with Connecting Legs, Wall Flanges & Wall Bracket for Hand Shower & Hand Shower Hand Shower of dia105mm Round Shape multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No HSH-1721 and Cat Part No. OPP-15125PM or equivalent in Somany/Cera/Hindware).

15mm Chromium plated fancy type wash basin mixer for mixing hot and cold water scrrwed down for iron pipe or brass ferrule, fixed in repairs, complete all as specified and as directed. ( Make : Jaquar Cat Part No. OPP-15433PM or equivalent in Somany/Cera/Hindware).

Overhead Shower 200X200mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No OHS-35497 or equivalent in Somany/Cera/Hindware).

Gun metal globe or gate valve screwed down high pressure with iron wheel head, screwed both ends for iron pipe 20mm bore, fixed in repairs, complete all as specified and as directed.

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete including fittings such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, complete all as specified and as directed.

Replacement of point wiring complete with 1.5Sqmm (nominal area) FRLS PVC insulated un-sheathed and multistranded copper conductor cable ISI marked in existing/new PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers including cutting & chasing and FRLS PVC insulated unsheathed 1.5Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing switches/sockets etc for one light point / fan point/ exhaust fan point / circulator fan point / bell/ buzzer controlled by one 1-way switch/ bell push, complete all as specified and as directed. (Note : The cost of Metal boxes and cover plates etc will be included in quoted rate.)

All as per description of Srl item No. 2 here-in-before but with 1.5Sqmm FRLS copper wire with 1.5Sqmm FRLS copper earth wire for one socket outet point 5 amps on the independent board, complete all as specified and as directed.

All as per description of Srl item No. 2 here-in-before but with 2.5Sqmm FRLS copper wire with 1.5Sqmm FRLS copper earth wire for 15 Amp power point, complete all as specified and as directed.

Modular switch 6 Amp, 1 way, 1 module size, complete all as specified and as directed.

Modular switch 16 Amp, 1 way, 1 module size with indicator lamp, complete all as specified and as directed.

Modular socket two-in-one, 6 Amp universal type, 02 module size, complete all as specified and as directed.

Modular Socket, 16 Amp, multipurpose shutter type, 02 module size, complete all as specified and as directed.

Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc., complete all as specified and as directed.

LED mirror light fitting 10/12 watt, cool/warm white as per site requirement and making all electric connections, fixed in repairs, complete all as specified and as directed.

Wall mounting tube light fitting, 22 watt including making all electric connections using PVC Sheathed copper conductor flexible cable, fixed in repairs, complete all as specified and as directed.

LED security light luminaire 45 watt pressure die cast aluminium housing with heat resistance toughned glass and IP- 66 protection with and including driver/transformer and including connector, complete all as specified and as directed.

Street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, washer etc., inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as specified and as directed.

Ventilating fan 250mm sweep metallic bodywith self closing louvers including fixing in opening and making all necessary electric connections, complete all as specified and as directed.

Sheet metal enclosure, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one mini MCB SP, C Curve type of capacity 20 Amp, 10 KA, fixed in repairs, complete all as specified and as directed.

MCB DB confirming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces, fixed in repairs, complete all as specified and as directed.

MCB C Curve type, 10 kA, 10 to 32Amp, Single Pole with over load and short circuit protection, fixed in repairs, complete all as specified and as directed.

MCB C Curve type, 10 kA, of 40 to 63Amp capacity, Single Pole and Neutral, fixed in repairs, complete all as specified and as directed.

Electric water heater vertical type of 25Ltrs capacity with steel tank and glass ineer lining, having 5 Star BEE rating, including 04 Nos. fasteners for hanging and making all necessary electric and water supply connections including fitings such as 16 Amp Plug Top, CP and PVC connections for inlet mand outlet upto stop cock, complete all as specified and as directed.

NOTE:- For minimum fair wages, EPF and payment to labour employed, refer Sch A Note No-17,18 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

R. S. Associates

aggarwal engineers contractors

M/S MSD & Associate

M/s Navansh Engineers & Consultants

The new hut furnitures

JAIPAL and BROS