PROVN OF RCC HUME PIPE RAINWATER DRAIN AND MISC BR AND EM WORKS AT NECKLACE ROAD COMPLEX MILIT GIRINAGAR PUNE 25

M&L for Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth of any type of soil lead upto 50 m and lift upto 1.5m, complete all as specified and directed.

M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in fdn , filling & mass concrete complete all as specified and directed.

M&L for sand filling under floors including water and consolidation complete all as specified and directed.

S & F factory made machine pressed precast concrete inter locking paver block any shape any size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement no pigment complete all as specified and directed and as per manufacturer instructions.

M & L for Plain Cement Concrete Type C1, 1:3:6 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, bonds and the like including weathering, complete all as specified and as directed

M&L for 15mm thick rendering in CM (1:4) on brick masonary surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M & L Brick work with old size fly ash bricks straight or curved on plan exc 6m in radius built in CM 1:4 complete all as specified and directed.

M&L Non Structural Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. (cut to ordinary lengths i.e. within 20mm of the length indicated) using Fe 410-W (Gde- E- 250)quality- A painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.