REPAIRS TO FLOORING AND TOILETS INCL SANITARY FITTINGS SUNKEN FLOOR AND OTHER PLUMBING WORKS ETC FOR CERTAIN BLDGS AT NP AND BILLETS AREA AT AF STN PUNE

Amount

Dismantling floor hearth and wall tiles including cement mortar bedding (but not backing) and removing from site complete all as specified and directed.

Dismantlingof Stone slabs and interlocking tiles laid dry of any description or thickness in floors, etc. complete all as specified and directed.

Dismantlingof Stone slabs and interlocking tiles laid in cement mortar of any description or thickness in floors, etc.complete all as specified and directed.

M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

Ditto all as per Item Ser No 4.00 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F 300x200x7mm thick glazed ceramic coloured tile on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed by Engineer -in- Charge.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring complete all as specified and directed.

Taking down cement plaster on brick or stone wall including racking out joints hacking for key scrubbing down with the water etc, complete all as specified and directed by engineer-in-charge.

M&L for 15mm thick rendering in CM (1:4) on external surfaces of brick work finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 1mm thick wall care putty on walls, complete all as specified and directed.

M&L for chequered cement concrete tiles 300x300x25mm thick, machine pressed (rubber mould type) confirming to IS 13801; set jointed and pointed in neat cement slurry in floors laid on 15mm thick in CM (1:6) screed bed or bedding layer with grey cement and pigment complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick and over and incl 15mm thick screed bed in CM (1:6) cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing 7 cut as per local trade practice and cut to shape of required size complete all as specified and directed.

M&L kota stone slab 20-25mm thick in riser of steps skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in CM (1:4)complete all as specified and directed by the Engineer-in-Charge.

M&L for 40mm thick cudappa stone slab over cement screed base laid and jointed wih grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Taking up or down 15 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed

Taking up or down 20 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed

Refixing old steel tubing and connection 15 mm bore in new or old position in wall, ceiling and floor etc complete all as specified and directed.

S&F 15mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etccomplete all as specified and directed.

Refixing old steel tubing and connection 20 mm bore in new or old position in wall, ceiling and floor etc complete all as specified and directed.

S&F 20mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc complete all as specified and directed.

S&F in repairs 15 mm dia stop cock of cast copper alloy but fancy type chromium plated screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed complete all as specified and directed.

S&F swivel shower rose of PTMT any colour for fixed with 15mm bore GI pipe complete all as specified and directed.

S&F in repairs Bib taps, fancy type CP cast copper alloy with crutch or butter fly handle , screwed down, or secrewed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Waste coupling of PTMT 32 or 40mm and min wt 45 or 60gms complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ) complete all specified and directed.

S&F PVC connection 15mm bore with PTMT nuts and 750mm long complete all as specified and directed.

S&F 20 mm dia stop cock of copper alloy screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed in repair complete all as specified and directed.

S&F 110mm bore PVC bends of any radius complete all as specified and directed.

S&F 75mm bore PVC SWR bends of any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.

M&Lfor 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed

S&F 75mm PVC SWR pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back size 550x400mm complete including necessary cutting for and pinning in ends of brackets ) including brackets and 750mm long PVC waste pipe 32mm bore & waste coupling 32mm dia of PTMT (half or full threaded) complete all as specified and directed.

S&F in repair vitreous china squatting pan `Orissa’ pattern, size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with ‘P’ or ‘S’ trap including provision of lime concrete bedding complete all specified and directed.

Disconnecting existing water tank exc 500 ltr and nexc 1000 ltrs, setting aside (for lowering if required) for repair cleaning, removing all scale and dirt by means of bleaching powder etc from tanks and from mouth of circulating pipes and re-fixing in position complete all specified and directed. Note: (Cleaning date shall be written on tank with black or white paint.)

Ditto all as per Item Ser No 42.00 above but exc 250 and n.exc 500ltr capacity complete all specified and directed.

M&L for cleaning and removing all scale and dirt ,etc , by means of bleaching powder from tanks exc. 500 ltr and nexc. 1000 ltr capacity and from mouths of circulating pipes ,etc complete all as specified and directed. Note: (Cleaning date shall be written on tank with black or white paint.)

M&L for cleaning and removing all scale and dirt ,etc , by means of bleaching powder from tanks exc. 250 ltr and nexc.500 ltr capacity and from mouths of circulating pipes ,etc complete all as specified and directed. Note: (Cleaning date shall be written on tank with black or white paint.)

Dismantling water tank of exc. 500ltr but n.exc 1000ltr capacity and removing from site complete all as specified and directed.

Ditto all as per Item Ser No 46.00 above but exc 250 and n.exc 500ltr capacity complete all as specified and directed.

S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank (cylindrical vertical with closed top ) Tripple Layered 500 Ltr capacity, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection complete all as specified and directed.

Ditto all as per itemSer No 48.00 above but 1000ltr capacity complete all as directed

S&F 20 mm bore ball valves high pressure PTMT with epoxy coated rod complete all as specified and directed.

S & F ball brass valves 20mm high pressure,with polyethene float and float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F waste fittings, brass, chromium plated for wash basin,sink etc . with long screwed shanks and fly-nuts, flange and bedded in red lead cement and other end fixed with 32mm dia complete all as specified and directed.

S&F Sink made of stainless steel 1mm thick kitchen or laboratory with plug washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495x420mm bowl size 410x330x160mm complete all as specified and as directed

S&F Sink made of stainless steel with drainage board1mm thick kitchen or laboratory with plug washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915x460mm bowl size 410x330x160mm complete all as specified and as directed

S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brackets guard and railing 60cm long complete all specified and directed.

S&F in repair Vitreous China half stall urinals bowel type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 secuing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement, fixing automatic flushing cistern with brackets flush pipe grating and union fo dischage pipe (excluding of fixing supply pipe to flushing cistern, trap) including waste pipe complete all specified and directed.

S&F Tubular towel rail 20mm dia 600mm long CP including brackets complete all as specified and directed.

S&F100 mm bore CI Branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type or with parallel branches complete all as specified and as directed.

Ditto all as per Item Ser No 59.00 above but double complete all as specified and as directed

S&F 75 mm bore CI Branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type or with parallel branches complete all as specified and as directed.

Ditto all as per Item Ser No 61.00 above but double complete all as specified and as directed

S & F in repair CP floor gratings 100mm dia with o without waste hole of PTMT (mim waight 40 grms) complete all as specified and directed by the Engr-in-Charge

S&F waste pipe of polyethylene of low or high density or PVC ,32 mmdia for urinal/wash basin/ flush tank fixed in repairs complete all as specified and directed by Engr-in-charge.

M&L for Bitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as specified and directed.

M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as specified and directed.

M&L for polythene flim black 50 micron laid in sunken floor complete all as specified and directed.

M&L filling with Brocken bricks n exc 63 mm gauge deposited, spread and levelled in layers n exc 15cm thick watered and rammed in a true surfaces in sunken floors complete all as specified and directed.

M&L for 25mm thick PCC 1:1.5:3 type A0( using 12.5mm graded stone agg) as in sunken floor mixed with water roofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately)

M&L for spout of 50mm bore PVC pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed

Dismantling stone slabs or roof treatment of any description in suspended slabs in roofs,suspended floors, chajjas, landings etc,including cement mortar, bedding (But not backing ) and rubbish of premises complete all as specified and directed.

Roughenng surface of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed.

M&L for cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 with mixing of liquid WPC by wt of cement (as per manufacturer instruction) complete all as specified and directed.

M&L rendering or screed bed 10 mm thick in CM 1:3 in averaging on RCC roof slab/terrace surfaces with mixing of WPC with cement (as per manufacturer instruction) including finishing even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound.

M&L for priming surfaces in moderate conditions with bituminous primer conforming to IS-3384, 1986 at the rate of 0.3 ltrs per Sqm for laying APP membrane complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt reinforcement not less than 150 gms/sqm) laid on primed surfaced application including preperation and applaying two coats of Heat resisting Aluminium paint over APP Membrane complete all as specified and directed.

GURBAX AND COMPANY

Smruti Construction